Preset some data

I have a 2010 list which has some common data like product names, product codes etc. The list also has the dynamic column which has the number of items which is the only variable data. Is there a way to prefix all other data except the number of items while
adding the new item.
Thanks in advance.
Regards,
Shivakumar

Murad,
I was seeing your message as i had some problem with my advanced table. Advanced table need not have to have a CO associated to it. Its fine if the CO is associated to the region which contains the advanced table. The mistake you were doing in your code you posted was that you were trying to set the value to the attribute in processFormRequest when you were supposed to do that in the processRequest.
My statement is based on what i did. I am not sure how far i am right unless someone corrects!!!
Thanks
Kumar

Similar Messages

  • Some data in ... could not be read or written. (Error code -36).

    Hello.
    I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
    'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
    So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
    But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
    So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
    But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
    And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
    Thanks.
    Mac mini   Mac OS X (10.4.3)  

    I experienced a problem in a familiar way.
    After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
    Somehow the proces stopped prompting an -36 error over some files.
    When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
    Any-one a solution?
    Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

  • "the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

    Hi all,
    I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
    It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
    "the finder cannot complete the operation because some data in [name of
    iMovie file] could not be read or written (Error Code 26)" or the
    message "A project file is missing. The file [name of the QuickTime
    movie inside the project.dv] couldn't be opened and is being skipped."
    This happened suddenly, I was able to save a backup version numerous
    times while working on the project.
    I followed some of Karl Petersen's advise on apple discussions. I opened
    the package contents, and everything seems to be there. The source file
    (original QuickTime movie) is there and can be opened and played. I
    replaced the current project file with the backup in the package
    contents, but that did not change anything. I was able to export the
    movie timeline into a new project as a single clip, but would like to be
    able to copy the current project.
    Thanks for any ideas..

    Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

  • Unable to  set some dates  in Adobe bridge cs2

    HI ALL
    Our keywording team using  the  Adobe bridge CS2.
    Kindly  hep me to understand Why  some dates  Like
    1/1/1970
    1/1/1642
    1/1/1890
    etc  .....
    I unable to  set in  ITPC image Tab  information .............
    Lakhan

    Hi
    Thanks for revert ......
    I  tried   with  CS2 & CS3  but only  specific  dates like (1/1/1970) i above  mentioned  is still  not   reflecting in IPTC image  info   ........
    Please suggest....

  • Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

    I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
    Below is a summary of the issue:
    After selecting datasheet view beow error occurs:
        "Cannot connect to the server at this time.  You can continue working with this list, but some data may not be available."
        "Unable to retrieve all data."
        The item counts displays say 100 out of 14000 items.
    Exporting List to excel is giving only 2000 records out of 14000 records.
    Other Observations   -  
    This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
    Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
    I have checked the Alternate access mapping setting ,its fine.
    It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
    I checked below links also ,but doesn't seem to work in my case.
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

    I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
    I am sharing my finding.
    1. First install the
    KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
    2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
    These two steps resolved the issue in our environment. Hope it might help others as well.
    Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • Problems Receiving Emails and some data on WIFI since latest software update.

    Problems Receiving Emails and some data on WIFI since latest software update. 
    My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem. 
    When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data. 
    Can someone please inform Blackberry and get a quick fix on this

    Sounds like you have Do NOt Disturb turned on.
    settings - do not disturb - off

  • LOG_FILE_NOT_FOUND when running cleaner manually after some data purge

    I hit LOG_FILE_NOT_FOUND error when running cleaner manually after some data purge, I searched the forum, found someone also faced the same issue before, but cannot find any clue on how to fix it. Below is the error trace and followed by our configurations
    Caused by: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)
    Environment must be closed, caused by:
    com.sleepycat.je.EnvironmentFailureException: Environment invalid because of
    previous exception: (JE 4.1.6) /scratch/tie/thirdeye/index/data-store
    fetchTarget of 0x50f/0x3fb9dd6 parent IN=368491717 IN
    class=com.sleepycat.je.tree.IN lastFullVersion=0x510/0x2ca7d18
    parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is
    likely invalid. Environment is invalid and must be closed.
    at
    com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureExcept
    ion.java:196)
    at
    com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1439)
    at com.sleepycat.je.Environment.checkEnv(Environment.java:2117)
    at com.sleepycat.je.Environment.checkpoint(Environment.java:1440)
    at
    com.oracle.thirdeye.datastore.DataStoreManager.clean(DataStoreManager.java:402
    at
    com.oracle.thirdeye.infostore.InfoStoreManager.clean(InfoStoreManager.java:301
    ... 11 more
    Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid
    because of previous exception: (JE 4.1.10)
    /scratch/tie/thirdeye/index/data-store fetchTarget of 0x50f/0x3fb9dd6 parent
    IN=368491717 IN class=com.sleepycat.je.tree.IN
    lastFullVersion=0x510/0x2ca7d18 parent.getDirty()=false state=0
    LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is
    invalid and must be closed.
    at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1332)
    at com.sleepycat.je.tree.IN.findParent(IN.java:2886)
    at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:881)
    at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:809)
    at
    com.sleepycat.je.cleaner.FileProcessor.findINInTree(FileProcessor.java:1152)
    at com.sleepycat.je.cleaner.FileProcessor.processIN(FileProcessor.java:1090)
    at
    com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:538)
    at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
    at com.sleepycat.je.cleaner.Cleaner.doClean(Cleaner.java:463)
    ------------Configurations-------------------------
    EnvironmentConfig.ENV_RUN_CLEANER -> false
    EnvironmentConfig.CHECKPOINTER_HIGH_PRIORITY -> true
    EnvironmentConfig.CLEANER_EXPUNGE -> false
    Any hints are appreciated. I'm also working for Oracle CDC, feel free to call me at 861065151679 or drop me an email at [email protected] so that we can talk more in detail
    Anfernee

    Anfernee, I will contact you via email.
    --mark                                                                                                                                                                                                                   

  • For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
    If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847.  It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email. 
    The other area to look at is your text messages.  These are included in the backup.  If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup.  If that's the case, deleting these may make a big difference.

  • I have photos on a cd which I'm trying to open .  If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture.  They are all in .jpg format.  Tried copying them but it said some data cannot be read.

    I have photos on a cd which I'm trying to open .  If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture.  They are all in .jpg format.  Tried copying them but it said some data cannot be read.  The files exist but I just can't seem to view them

    Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file.   If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
    You could try a photo file recovery application like  MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
    OT

  • How to delete some date in target table at a mapping?

    How to delete some date in target table at a mapping?
    I extract date from source tabel into target table,
    but before extract date I want to delete some date from target?
    how to do?

    Just to change a bit of terminology in the reply, within the mapping, click on operator properties and choose TRUNCATE/INSERT.
    Note that truncate is dependent on constraints, so you probably must disable those before doing this. You can of course do DELETE/INSERT...
    Jean-Pierre

  • Import some data from one oracle to another...

    Hi Guys,
    we have 2 oracle database servers on 2 different machines with schema.
    I want to import some data from a specific table from one oracle into another oracle.
    what is the way to do that.
    Please help in details
    Imran Baig

    Hi,
    Thanks for the reply.
    Tables are already created in both of the oralce databases only the data varies. I just have to import only few records from one oracle to another with the same user name and table already existing.
    I have tried using database link. I can view records from the other oracle database but as soon as i write an insert command oracle gets held. I cant do anything.
    Is there any other way?
    Imran

  • Some data DVD's and External Hard Drives not recognized by Leopard only.

    1] Some data DVDs that were burned under Tiger do not show up in Leopard. Only a dialog box asking what I want to do with the blank DVD comes up when I insert the disk. On my Tiger computer, the disk shows up perfectly fine. It is a DVD+R being used on a MBP 2ghz... and was burned on that very machine in Tiger and would load fine in Tiger. Now nothing on the same computer in Leopard. I'm going to reburn the disk on my Mac Mini on a DVD-R, but still wanted to know any ideas or input as to why it won't recognize the disk.
    2] I also have an external USB2.0 HD. I formatted the disk using my G4 Mac Mini (which has Tiger) and it is not recognized on my MBP. In Disk Utility I try to reformat the drive, but it says that it cannot do so because the "resource is busy". I plug the drive back into the mac mini and it works perfectly fine. Why would this be and how do I correct it?
    Full updates on both OS's. No other problems with either computer that I know of.

    Unfortunately, commercial DVDs that you have bought 99.9% of the time will be copy protected and Apple's forum terms prohibit discussion of circumventing the copy protection.  In various places circumventing digital copy protection is potentially illegal even if you own and intend to keep the DVD.  Hence Apple do not wish DVD rippers etc discussed here.
    Another problem is that AppleTv cannot play back DVDs copied to an external drive as it does not understand the format.  So even if you can 'copy' your DVDs you then need to convert to h264 format to play on AppleTV.
    Video formats for AppleTv are limited.  They also do not support DVD like menu structures (thogh AppleTV 1 did with itunes Extras movies).
    If you have unprotected video you wish to convert eg home video on DVD, then something like Handbrake or MPEGStreamclip with Apple's MPEG2 component might do the job.  These programs are not DVD rippers but can process unprotected MPEG2 video.
    AC

  • Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

    Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

    The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
    The names on the file are all Uppercase
    When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
    I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

  • Error Code -36 Some data could not be read or written.

    When trying to copy some files from external firewire drives I am getting errors that say "The Finder cannot complete the operation because some data in "LatestCollection.mov" could not be read or written (Error code -36).
    I have some Lacie 250G Extreme drives that are not having a problem, but I've now tried THREE different Lacie Pocket Drives and they all come up with this error when I've tried copying files that are of all different kinds, for Quicktime files to Quark files to a disk image.... I've tried hooking up to different firewire ports, I've tried three different firewire cords, same problem. BUT, I am able to copy some files without a problem... Just various random files won't copy because of this error. ALSO, I've used these drives on other computers and been able to copy the exact same files off without any problem.
    Not knowing what to do, I repaired the disk permissions on my main drive. That did nothing.
    I've combed the support discussions and come up with nothing that sounds exactly like this.
    Anyone have ANY idea??

    Well, Apple Care solved my issue. I'm posting for anyone else that may encounter this problem... perhaps this'll help you because I didn't find any answers in the Discussions...
    They had me unplug everything from my computer. EVERYTHING, including power cord. They had me wait at least 2 minutes. We then zapped the PRAM by holding down the Opt + Cmd + P + R keys until after the third gong.
    Then they told me to plug back in just the keyboard, mouse and monitor and start up. Once up they had me run Disk Utilities and repair the disk permissions for the hard drive.
    All fixed.
    I had repaired the disk permissions multiple times, but the key step apparently was the unplugging everything and waiting... apparently that resets some part of the computer when you do that.
    Best of luck,
    Rolyn

Maybe you are looking for