Preset to put a registration mark in center of page

I cannot figure out how to put my reg. mark in the center of the page to set it up for silk screening! When i click Print and go to marks and bleeds and select the tab for Registration Marks they only go to the outer corners and there is not a preset (that I can see) that puts them to the center. Please help!!

Typically reg. marks are outside the print area. If you need one within the page area you'll need to create your own. You can create the register mark, like any other artwork and assign it the default "Registration" color from the swatch panel.
To place something in the center of a given artboard:
Either:
Cut artwork element(s) (Cmd-x)
zoom to artboard (cmd-0)
Paste (Cmd-V)
Or:
Select artwork element(s)
Choose "Align to Artboard" in pull-down menu in options bar
Click "Horizontal Align Center" and "Vertical Align Center" buttons in option bar

Similar Messages

Putting registration marks on sheet using Pages08?

I am creating a short handout and want it to be 1/3 page wide. Great - I have a 3 column layout and am ready to print. What I want to is put small registration marks at the top and bottom of the gutter area beteen the columns to aid in using a papercutter. Any way to do this short of measuring each page and using good old #2 pencil?

When you are using the SaveAsPDF option for the book (which is the recommended route [now] over the File > Print], the Registration Marks are found on the Settings tab. Onc these have been selected, they are sticky (i.e. FM remembers what you used last).
Using the File > Print settings, there is a difference in what FM remembers between printing individual files and printing the book file. You have to ensure that every file (including the book) has the correct setting when using this route.

FrameMaker 10.0.2 still not printing to pdf with registration marks

I upgrade from FrameMaker 10.0 to 10.0.2 this weekend and was able to print a test page with registration marks. Today I cannot. The page size is larger than the document. The message "registration marks are outside of page size" appeared once.
My book is 3.5" x 6" and the Format > Page Layout > Page Size is 8.5" x 11". The print driver is Adobe PDF. Western registration marks are turned on.
Am I doing something wrong?

I haven't checked this lately, but I'm remembering that registration marks only appeared automagically if the Press job option was enabled.
Otherwise, as Van suggets, just add them with Acrobat (assuming you have the full package).
Also, I hope you're printing to the Acrobat printer, not using SaveAsPDF...
Art

Green box with registration marks appears from nowhere

...and I'd like to get rid of it, but how and what is it?
In any AICS3 document I open, my default is now an art board that is 200"x200" with a green rectangle about 60"x12" in its center. The green rectangle has registration marks on its corners. Even if I change the size of my art board to something smaller, the green rectangle remains. I've gone through all the preferences and everything in the View menu, but it is not affected by anything. It does not seem to be a template. Can anyone help me: 1. get rid of this annoying (but apparently benign) rectangle and 2. tell me what it is. It does not seem to do anything. Needless to say, it cannot be selected and is not referred to in any of the palettes. Thanks in advance for any help.
Mike B
OS 10.4.11/ AICS3

Try Object > Unlock All and Object > Crop Area > Release. Also look for a locked layer in the Layers panel.

Crop marks for Center Cut in Title Safe?

I have recently picked up Premiere Pro 5.5 after the whole Final Cut Pro X fiasco, and a feature I loved and used all the time in Final Cut Pro 7 which was missing in Final Cut Pro X was crop marks for Center Cut in the title safe. I often have to do HD Projects that are broadcast on 4:3 TV center cut, so you need to make all the graphics for the center cut for SD, and then leave safe space for the HD version.
From what I can see I don't see these marks in Premiere Pro 5.5. Is there a place for feature requests for Premiere Pro, so I can put in a request as this is something that is really necessary in our production workflow.

Well, PrPro's Titler has the Center Align for both Vertical & Horizontal, but for guides, etc., it is lacking.
I use the tips in this ARTICLE to create alignment guides, as per my needs.
I have been filing Feature Requests for years, and have also asked for many of the element Alignment functions from PS.
Good luck,
Hunt
PS - I also create custom guides/grids for PiP, where I need to match the Scale & Position for the PiP footage.
PPS - I assume that you have looked at Title & Action Safe marks, and they just do not do it for what you need.

Add document size to registration marks

Is it possible to customise registration marks so they add the document size? Or is there a plugin that will enble this function? I'd like to implement it in my studio to help with our sign off procedure.

If you add slug space around your document (which goes around the bleed), you can put anything you like in there.
It's still a manual job -- the registration marks can be adjusted somewhat in size and position, but adding a custom variable text is too much.

Microdots Registration Marks

One of my vendors have requested that we include microdots on each printing plate for registration instead of crop marks and center marks. Is there a setting in Illustrator for these microdots - like there is for creating crop marks - or will I have to manually draw and place them within the artwork?

Brenda:
You'll have to make them but you can easily create a Symbol for this. Also, if you have fixed page sizes you can create a full page symbol with the microdots in their correct place and just drop it on the appropriate sized document as needed.
Get any specs from your vendor to create these and make sure you get an approved copy that's been signed off on by your vendor (trust me, it's worth it in the long run.)
Have fun!

How do I put a check mark to all the songs in the library/

somehow this morning after deleting voice memos from the iTunes library i noticed that all my songs became de-checked. Which means they won't play until i put a check mark in the check mark column. How do I check them all ?

Thanks so much Meg I have almost 19,000 songs in my library and i'd be lost without being able to hear them.

Change color for trim and registration mark

The trim and registration marks are having the color name "All" in the generated pdf from InDesign. Any one help me out on how to change the color to K (black) while generating PDF out of InDesign.

JohnAD77 wrote:
Is it possible to make to 4/c to 1/c (black 100%) while generating PDF itself without adding marks in the document?
Maybe, in CS6, by exporting to Grayscale, but this will make everything black ink only. Otherwise, no.
To add your own marks, add a slug area to the file, draw whatever you want for marks in that area, using [Black], and turn off automatic marks in the export dialog, but Include Slug Area under the bleed settings.

Why does firefox put a check mark on work offline?

I have a problem with a fresh install of firefox.
It seems to place a check mark on work offline.
After removal it worked fine for a time & then firefox put a check mark back on work offline.
Please help.

Firefox detects when your computer goes offline and automatically puts a check mark next to "Work Offline".

Placing registration marks on the corners of document

I have to process a lot of files to be router trimmed which requires them to have very specific registration marks. There are 2 different marks we have to use. The first mark is at the top left corner of the image contains 2 .25" dots separated vertically by a 1" gap. The other mark is one .25" mark that is in the top right, bottom right, and bottom left corners. I have both of these registration marks saved as symbols (or just AI files). I want to be able to have the script automatically place the appropriate marks in the corners. How can this be done?
Thanks!
Chris

here you go, your symbols must be the first and second in the symbols panel. Top/Left symbol must be the first in the Symbols panel. The other symbol must be the second in the panel
#target Illustrator
// script.name = addRegistrationSymbols.jsx;
// script.description = adds custom registration marks (saved as symbols) to each corner of the active arboard;
// script.required = 2 symbols. Top/Left symbol must be the first in the Symbols panel. The other symbol must be the second in the panel
// script.parent = carlos canto // 10/30/14;
// script.elegant = false;
// reference https://forums.adobe.com/thread/1621840
// usage: your symbols must be the first and second in the symbols panel.
if (app.documents.length > 0) {
var idoc = app.activeDocument;
    var margins = 0;
    var bounds = idoc.artboards[idoc.artboards.getActiveArtboardIndex()].artboardRect;
    var ableft = bounds[0]+margins;
    var abtop = bounds[1]-margins;
    var abright = bounds[2]-margins;
    var abbottom = bounds[3]+margins;
    var twoDots = idoc.symbols[0];
    var twoDotsInstance = idoc.symbolItems.add(twoDots);
    twoDotsInstance.position = [ableft, abtop];
    var oneDot = idoc.symbols[1];
    var oneDotInstance = idoc.symbolItems.add(oneDot);
    var h = oneDotInstance.height;
    var w = oneDotInstance.width;
    oneDotInstance.position = [abright-w, abtop];
    var dup = oneDotInstance.duplicate ();
    dup.position = [abright-w, abbottom+h];
    var dup2 = oneDotInstance.duplicate ();
    dup2.position = [ableft, abbottom+h];
else {
    alert ("there are no open documents");

How to put a check mark in a PDF document, if using an iPad 2

How to put an check mark in a PDF document, if using an iPad 2?

You need to implement below logic:
1. check if field_date = sy-datum. in this case do nothing.
2. else . move sy-datum to field_date .
3. modify your internal table with field_date .
4. populate final table to database table .
hope you get it.

How do I put a copyright mark and initials on picture using elements?

How do I put a copyright mark and initials on my picture usng Adobe Elements 12?

Select the T tool and click on the part of your image where you wish to add the copyright.
On windows hold down Alt and on the numeric keypad type 0169
The copyright symbol only appears when you release the Alt key.
Add your name or initials. Save using a new copy file name so that you don’t permanently change your original.
On Mac OSX Press the "alt" key (or "option") and hold it down while typing "g" on the keyboard to create the © symbol.

How to put a picture on game center, How to put a picture on game center

Why can't I put a picture on game center on my iPod touch

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.

I need a program that will creat registration marks. can I do this in Adobe elements 11?

I need a program that will creat registration marks. can I do this in Adobe elements 11?

Most of the users look for copyrighting or having a watermark on their images to protect them from illiegal usage.
If you are looking for this perfect use then below links can help you:
There are multiple ways to add captions/watermark/copyright info in Photoshop Elements
Below KB articales should be helpful in this context depending on your need and usage and expertise
http://kb2.adobe.com/community/publishing/851/cpsid_85114.html
http://kb2.adobe.com/community/publishing/851/cpsid_85127.html
http://kb2.adobe.com/community/publishing/851/cpsid_85128.html
Thanks,
Garry

Preset to put a registration mark in center of page

Similar Messages

Maybe you are looking for