Preset won't apply exposure change in Lightroom 5

Some of the commands (especially Exposure adds/removals) won't apply to the photo. Please help!

With your theory in mind of it being a permissions problem, I went ahead and moved my Looks from an external drive to my computer.  Still no dice.  Although, do you believe that it might need to be in a particular place on my computer?  Like say, a SpeedGrade folder inside and Adobe folder inside my library folder?  I don't see why that would matter.  I found a rather time consuming fix.  If I open the Look in After Effects, I can apply it to the video clip but that's just a little convoluted.
I'll keep searching for a solution and post any updates.  Thanks for your help thus far!

Similar Messages

  • How to fix exposure changes made by Photoshop during panorama creation?

    Hi There,
    I have a panorama created by Photoshop but need to tweak some of the joins which is not an issue. But when I paint out/paint in objects from different layers, I've noticed that the exposure within the same layer has been changed by photoshop which creates a line.
    It's like photoshop applied exposure changes to the visible parts of the layer after blending - instead of applying them to the entire layer before blending?
    See the image below, that boat is all on the same layer but there's a line through the middle - how do I gain access to the exposure changes so I can paint/blend that line?
    Any pointers in the right direction would be much appreciated.
    Cheers

    the .xmp files are only generated if the file you are working on doesn't support metadata but JPG files support it so the information is written inside them. If you want to "flatten" the file so that the pixel information gets changed then you will have to resave the files which isn't something that you should do very often with JPG files (preferably only once).
    To mass save files you can either select them and go to Tools->Photoshop->Image Processor (but this will launch Photoshop) or open them up in Camera Raw, select all of them in the film strip and select Save Images

  • I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

    I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.

    The adjustment brush cannot be added to a develop preset.
    If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
    If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings.

  • Lightroom Presets Won't Auto Preview

    I've had this issue recently where my Presets won't automatically preview like they used to.  I've tried switching back and forth between Library and Develop, but no help.  I'm forced to apply a preset and then remove if I don't like. 
    Any thoughts?
    Best ,
    DDS

    miamigables wrote:
    Any thoughts?
    Only one - try:
    DevPresetLab
    it will create virtual copies corresponding to specified dev presets and load them into the Lr comparator.
    Rob

  • I can hide purchased books in iTunes, but this change won't apply to my iPad when synced?

    There's a book I bought two years ago that's just not a good book and I can't have visible with my little siblings using my iPad. It's not on my bookshelf on my iBooks app, but it is under Purchased Books. I understand you cannot permanently remove these, but I heard you could hide them via iTunes on your computer. So I did that, I went into iTunes and successfully hid the offensive book and so it didn't show up under my purchased section in the iTunes store, nor in my books section of iTunes. Great. I sync my iPad and select apply all changes. When it's done syncing, I check the purchased section of my iBooks, and the book is still there, obviously not hidden. How do I fix this, and why is this happening?

    It will always be in purchases, but if you have already hidden the book in iTunes purchases, it will not show anymore.
      The only way to delete the book from your cloud list on the iPad is to download and delete.
    I told you it was dumb..    Don't try and make sense of it, just do it.

  • Preset won't stop auto applying

    So as soon as I import my files it automatically applies one of my presets and I have to manually undo them. I don't remember ever setting this up, please help it's driving me crazy!

    Check that you haven't set the preset to be applied during import. Open the import window and look to Develop Settings drop-down men on right side panel named Apply During Import. It should be set to None.

  • Any way to batch gradual exposure change?

    I make time lapses and there is a very common frustration where flicker is created by small exposure changes due to the aperture blades not falling in the same position or when using an auto mode where exposure changes and the camera changes exposure values.  To problem is worsened when doing a time lapse during sunset/sunrise when one expects the exposure to change drastically but needs to compensate in order to get the entire scene.
    I've experimented with using Lightroom's "Match Total Exposures" feature which is great at adjusting the exposure to even out the discrepancies between changing exposure values.  But this doesn't take into account the exposure of the scene is expected to change.  So when doing this for a sunset, as I increase the shutter speed to account for the setting sun, Match Total Exposures adds negative EV because it recognizes the longer shutter speed would be over exposing the selected "correct" photograph.
    I would very much like to find a way to use the Match Total Exposures feature to first even out the exposure changes from the changing parameters, and then apply a batch gradual exposure change to the series so that it will know to allow for these changing lighting conditions.
    Lightroom is great for adjusting individual photos or for a series under the same lighting conditions using (sync settings and match total exposures) but with changing lighting conditions is would be great to have the ability to gradually adjust values, not just exposure but other tone values.

    You can probably fairly easily modify the script here.

  • Smooth jerky exposure changes in Premiere Elements 13

    Folks - can anyone tell me how to smooth jerky exposure changes caused by the automatic camera settings (temporal smoothing) over a video clip? (Can't seem to find the temporal setting in Premiere Elements 13).

    AndyD74
    Thanks for the follow up replies.
    Your Edit Menu/Project Settings/General readings suggest that you or the project have not set the correct project preset for the project. If the Canon is the major source of your Timeline content, then the project should not be 1080i (the project's default). It should be
    NTSC
    DSLR
    1080p
    DSLR [email protected]
    You are going to have to go to a new project to correct that situation. You cannot change the project preset in 13/13.1 once the project preset has been established.
    If the project (automatically) is not giving you the correct project preset, then you need to set it yourself (manually) before you import the source media.
    File Menu/New/Project and Change Settings
    In Change Settings, set for the project preset mentioned above. OK out of there.
    In the New Project dialog that appears, rename the project and make sure there is a check mark next to "Force Selected Project Setting on This Project". OK out of there.
    Then in the workspace, import your source media with Add Media/
    Another factor is the custom made intro that I created in Aurora3d Title Animation. What are its properties and how do they compare with those of the Canon's 1080p29.97. If you remove the Title Animation from the Timeline, do the problems disappear even with the DSLR project preset pointed to?
    Please review and consider.
    Thank you.
    ATR

  • I have a folder from today that won't let me change its name. I can change the other folders just fine. I do it routinely... any ideas what I screwed up?

    I'm as a loss. I don't understand why today's folder "2014-06-06" won't let me add "_Kim" to the end. I do it will all my folders since I download from a couple of cameras.

    sorry... in PS cc and I closed Photoshop, just in case.... it didn't make 
    any difference and it hasn't ever been an issue before.
    In a message dated 6/6/2014 7:03:57 P.M. Eastern Daylight Time, 
    [email protected] writes:
    I  have a folder from today that won't let me change its name. I can change
    the other folders just fine. I do it routinely... any ideas what I 
    screwed up?
    created by ssprengel (https://forums.adobe.com/people/ssprengel)  in 
    Photoshop Lightroom - View the full  discussion
    (https://forums.adobe.com/message/6440564#6440564)

  • I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem b

    I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS.  I would like to know how to overcome this problem?

    Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

  • K7N2G-L won't accept Vdimm changes

    When I put this box together I used an Athlon 2000, but anticipated getting a Barton so I purchased PC2700 ram. The box has run fine for the last year on the 133 fsb of the 2000, but when I replaced it with the 2500 Barton, it became unstable (lockups and crashes to the Desktop). On a 133 fsb the ram runs 10 passes of Memtest with 6-2-2-2 timings and no errors, on a 166 fsb it gets errors almost immediately (Test 2) no matter how relaxed the timings. The 5/4 ratio lets me run the Barton at it's stock speed while running the ram at 133 and this works just fine, but I'm not getting all out of the ram that I should. I've tried changing the Vdimm to 2.7 but when I save and exit the setting reverts back to 2.6. I've tried various suggestions like shutting off the power after saving / before the boot, but nothing works. Any ideas on making the Vdimm setting stick? PS... I never saw any updated BIOS changes that I felt I needed which is why I still use the 3.3

    I cleared the CMOS and set the BIOS to Auto when I installed the new cpu. The ram won't run stable at 166 even using it's own SPD settings (7-3-3-2.5). I don't get why the Vdimm change won't apply. I've had no problems with any ot the other BIOS settings and I had hoped the ram would run ok on 2.7v if I could get the change to stick.

  • Project properties it won't let me change compiler option

    I get this error
    X:\CFusionMX7\wwwroot\WEB-INF\flex\services-config.xml
    but when I go to the project properties it won't let me change it, the Apply button is greyed out.
    Project clean didn't help either.

    The None option is not available in all locations.
    Reset your iPhone then try editing your payment credentials.
    Tap Settings > General > Reset > Reset All Settings
    No data is lost as the result of a reset.

  • Can't apply application changes

    This seems like a silly question, but I just installed the newest BB Desktop Software 6.0 and I can't apply any changes to my installed software.  I can do things like run backups and all that, but when I go to the application screen and make a change or two (to install or uninstall), I can't click the Apply button.  It's just not clickable. 

    I was finally able to fix it.  After a 2nd wave of cleaning out more apps to make room, I was able to run that same update again.  After the install/reboot, it seems to be fully installed.  I also seem to have a lot more open application space.
    The two installs were different.  The first was a 4-part install; the second was just one part.  I'm not sure what's going on behind the scenes where it thinks it needs a lot more space than what it actually needed.  It must store both the old and new versions on the BB while it installs (which is why it needs so much space), and then after that 2nd install, it finally clears out the old data and everything goes back to normal.
    So, in summary, to fix it:  If the Apply button won't work, clear out some unused apps and run the install.  When done, you'll probably have to clear out more stuff and run the install again.  When fully installed, you'll have your space back to re-install the apps you may have deleted.

  • I changed my iCloud account ID but my new phone won't let me change it. It keeps asking me for for my old ID password and won't let me delete the account unless I turn off the find my phone feature. It won't let me do this because it will not accept my ol

    I changed my ICloud account  ID but my new phone won't let me change it unless I put in my old password and turn off the find my phone feature. But the phone will not recognize my old password. Can someone help me?

    New iPhones don't come setup with an Apple ID/Password. What you're experiencing is called Activation Lock, & unless you know the original Apple ID/Password that was originally used to first activate this phone, you won't be able to reactivate it.
    You can login to iCloud.com, from any computer, use Find My Phone to locate & erase the phone. But, you'll still need to know the original Apple ID/Password to reactivate it.

  • HT5622 My apple I'd for my cloud is my old id and won't let me change it to my new id. How do I do this?

    I recently bought the iPhone 5 . The apple id for my cloud won't let me change the apple id it has from my old to my new one how do I make this happen?
    Thanx in advance
    Donna

    https://discussions.apple.com/message/21654178#21654178

Maybe you are looking for