Presets for size on PSE 12

On the old Photoshop Elements 2.0, when I opened New, there were several presets for the size, like A4, A3 etcetera. On Elements 12 I can't find these options. Do I simply have to type in 21 cm and 29,7 cm for A4 or is there anothe solution? Thanks in advance for your reaction!

Thanks, 99jon!
Date: Mon, 17 Mar 2014 08:58:58 -0700
From: [email protected]
To: [email protected]
Subject: presets for size on PSE 12
    Re: presets for size on PSE 12
    created by 99jon in Photoshop Elements - View the full discussion
Click the pre-set dropdown menu and choose International Paper.
Then click the size dropdown menu.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6216899#6216899
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6216899#6216899
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6216899#6216899. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

More presets for canvas sizes(dimensions)

Example:Android wallpaper,Windows Wallpaper,Facebook Timeline...etc.It would be alot easier than searching the internet and hoping you got it right.

Maybe I have mad it too quickly after each other.
But when I choose one of the presets I have made. Then you see 19, bij 12,7 by each of them. Just like the second screenshot.
Op 22 apr. 2015, om 08:33 heeft c.pfaffenbichler <[email protected]> het volgende geschreven:
presets for cropping in CC
created by c.pfaffenbichler <https://forums.adobe.com/people/c.pfaffenbichler> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7462836#7462836>
How exactly did you proceed when you created the Crop Presets?
What exactly happens?
Could you please post screenshots to illustrate the issue?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7462836#7462836 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7462836#7462836
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Photoshop Elements 12 - preset for new blank file

I am using a trial of Photoshop Elements 12 and I would like to know how to make a preset for a new blank file so I don't have to keep loading that information into the program.
Thank you.

First make sure pse 12 is not running before doing the below steps.
Also, in windows 8.1, you need to have the Hidden Files and folders shown
http://www.ricksdailytips.com/view-hidden-files-and-folders-windows-8-1/
Go to
C:\Users\User Name\AppData\Roaming\Adobe\Photoshop Elements\12.0\Editor
and open the New Documents Sizes.psp in Notepad
Then after whatever number is actually in the file (two in my example)
paste this line and then File>Save
"785 px X 250 px" 785.00 250.00 px 72.00 dpi RGB 8 1.00 white "sRGB IEC61966-2.1"
Then start the pse 12 editor and the preset should show on the preset list in the new document dialog

How to create a preset for computer output of 1024x768?

I just upgraded from Premiere Elements 1.0 (yes, 1! :) ) to PE7. I record user group meetings for my local software developers group. We have screen capture at 1024x768 pixels and audio.
In PE1 I had no trouble bringing this footage in, editing it and exporting it as 1024x768 for viewing online by the members.
However, I can't seem to find anyway to create a project preset for 1024x768. It seems I can only create SD, HD and similar.
When attempting to create a custom preset 90% of the values are pre-filled with settings and I can't change them. I see textboxes for the height and width but I can't change them.
Is this a limitation of PE7? Why in the world can I not create a video any size I want? Without this ability the upgrade is almost useless to me.
Please let me know because I feel like I must just be missing something.
Thanks!
Matt

Hey Steve,
Thanks for the reply.
I did see the 720p preset and this does produce a nice image. The SD preset made the output look muddy and the screen text was unreadable.
That being said, when importing my media into a project on the 720p preset I get the black letterbox bars on the side.
I did render a 10 second test area and changed the output size to 1024x768. I was afraid it would squash the entire video, but much to my surprise it just cropped it. So, while I have to work with the letterboxing I can output an actual 1024x768 video. I was also having a little trouble because I was using File - Export Movie to, well, export my movie. When I tried the Share task, set it to PC and changed the settings this was much easier and produced a much better result.
Thanks for the help!
FYI, I use PE7 to export it as a wmv. I'm playing with Expression Encoder to then encoded this with VC-1 for Silverlight clients.

CS3 How to choose a Codec/extension wrapper and Preset for a project

Goal
To create fanvideos from commercial DVDs for personal fair use.
Potential to use to promote a series in a social media campaign with permission of owner.
Tools on Hand
Three seasons worth of the series ripped from commercial DVD --> .VOB format in TS Folders on my 2008 10.5.8 Mac using MacTheRipper
FFMpegx CODEC pack.
CS3 Premierie Pro with Mac updates that were posted on the Adobe site.
So far I've been able to
I managed to use ffmpegx to convert my .vobs into .mp4s, which I then renamed as .movs to get Premiere to recognize it. I managed to sync my audio with the mp4 encoder (may have been a H264 but not sure by changinge the frame-rate from ntsc film to ntsc.
Problems I've encountered
I had admittedly been experimenting with different codecs and .exts, trying to find optimum quality:size:premiere/iDVD compability, so I had a variety of source footage in my project. For some, I had to readjust the pixel aspect ratio. But when i rendered/exported the final product...everything was squished and incorrect. I had sound syncing issues for some of my trials, too. Before I was trying to make things compatable with iDVD. I no longer care about this and have no intention of burning anything with this project.
I saw things on the internet about using Encore's library of codecs, but couldn't find anything .dll on my computer. I also have no idea how to use any of hte CS3 support software (bridge, extension manager, after affects)
Current steps I'd like to take
I'm starting over and converting my .vob files into something Adobe will recognize (a simple file name change didn't work in this instance). I've read the different file types that Adobe PPro recognizes, but it's come to my attention that it prefers some file types to others. Which extension wrappers are the least likely to cause headaches when trying to edit in Pro?
Out of those possible codecs and extension wrappers that are compatible, which are the best for fitting a lot of quality into a small filesize? I heard good things about H264, but I don't know if the patch I dl'd will be enough to make it Adobe PrePro compatible (and I know there are a few different kinds of h264. the only one i had any success with at all put it an mp4 mpeg container, but didn't end up being anything of a filesize savings compared to the other h264, which ended up being useless). I have about 60 .vobs that are 2 GB big, and don't have an external hard drive yet, so this is a consideration.
How do I choose a preset for my new project? These DVDs were released over the course of 3 years, and they don't all have the same specs in their native format (when I grab the info from DVD player, it's different). Will I have better luck using different seasons if I convert them from .vobs to identical target file types? I guess the better question is, when using 3 different types of files that are wrapped into .vobs, am I better off customizing the target file to match the file information DVD Player gives me for each different season....or trying to find specs that serve all three seasons best and have more uniform files imported into Premiere? Eitherway, how do I know how to pick a Preset? I try keeping a 16:9 or 16:9 DVD in my target files, but does that make it a widescreen project to start? Once I start the project, is it too late to change these settings?
Thank you for helping a newbie. I tried looking around for answers to each problem as I came across them, but eventually I got overwhelmed and threw my hands up, deleting everything. I'm ready to ask for help and have a little patience.
*It's important for me to use free or very affordable 3rd party software, as I am currently unemployed.

You MAY want to think about a product that will read the output from your DVD player and convert to DV AVI
Matt with Grass Valley Canopus in their tech support department stated that the model
110 will suffice for most hobbyist. If a person has a lot of tapes that were played
often the tape stretches and the magnetic coding diminishes. If your goal is to encode
tapes in good shape buy the 110, if you will be encoding old tapes of poor quality buy
the model 300
Both the 110 and 300 are two way devices so you may output back to tape... if you don't
need that, look at the model 55
http://www.grassvalley.com/products/advc55 One Way Only to Computer
http://www.grassvalley.com/products/advc110 for good tapes, or
http://www.grassvalley.com/products/advc300 better with OLD tapes

"Use presets for responsive layout" not working in Chrome

I am building a responsive website. I am going to have parts of the website animated using Edge Animate. I will make the animation and then insert it into a div in the responsive website I am building.
The Adobe Edge animation has a width of 100%, so that it resizes according to the area that it occupies the full width of the div no matter how wide that div may be in px.
It is all working fine, but:
I have an image in the Edge animation that is center aligned. It must stay center aligned no matter what width the animation ends up being.
Within Adobe Edge, in Properties, in Position and Size, there is a option where, if you hover your mouse cursor over the top right button a tool tip says "Use presets for responsive layout"
With the image on the stage selected, I can click on the "Use presets for responsive layout" button and then choose "Centre background Image".
It works perfectly in all browsers accept Chrome (even IE is playing ball this time). In chrome the width of the image stretches out as the div stretches out..
The "Centre background Image" setting says that it won't scale the image. But in Chrome it does.
What can I do to "tell" Edge Animate to center the image but not scale it in the Chrome browser?
I can see that in the image properties it is set to Background image x axis and y axis 50%. And the width is set to pixels. But in Chrome, the image stretches.
If you go to http://www.brainstormadvertising.co.uk/demo/services.html you will see what I mean. The circle image is centering BUT stretching in chrome browsers while centering nicely and NOT stretching in other browsers.

Thank you for your reply Josh. But the point of this setting in Edge Animate is that you can set it up that the background image is center aligned and does not scale. Yet it produces code that gives the width as 21.72%.
A little further along I see background-size: 48px; . This is correct.
So all the browers are reading background-size: 48px; as the scale measurement but Chrome is reading the width only, not the background-width. So this "Use presets for responsive layout" works in all browsers except chrome.
I don't know how to change that code after the artwork has been published. I can see the code using Firebug, but where do I change it in my code on my computer before uploading to the server?
I have reported this bug to Adobe.
Please see the attachment. You can see where all the settings are made and where I am getting a problem.

Using Presets for Printing Panoramas

I have created a generic preset for printing panoramas on an Epson 4900 connected to a Mac with OS 10.8.4. Using the Epson printer driver's Page Setup via Lightroom 5, I reset the length of the panorama for each print and then update the Lightroom preset. Everything else in the preset is correct for my prints (paper, profiles, etc.).
I have, however, periodically had the problem that even after resetting the print length in the driver and updating the generic panorama preset, that the print is the wrong length (either too long or too short) even though all indications are that everything is set correctly (see below). This can occur even if I shutdown and restart Lightroom (I have also had this problem in LR4).
I would like to known how to correctly set up a panorama so paper is not wasted due to an incorrect length.
The following items appear to be set correctly:
(1) Printer Driver Page Setup paper size
(2) The Lightroom Preset for the generic panorama (Both the print size and paper size. I looked at the text of the preset settings via TextEdit) I note that there is binary information at the bottom of the Lightroom preset. Is that being correctly updated?
(3) The print display in Lightroom (the image correctly fills the print template which is of the correct size)
(4) The print cell size in Lightroom is the size I have set in the printer driver
The different sized panorams were printed on different days and the printer was turned off between those days. Cut sheet prints were also printed in between the panorams.
One panorama was 8 feet long but it was truncated at 39 inches twice before it printed correctly (after I restarted Lightroom but not the printer). The other was correctly printed 58 inches long but on 8 feet of paper (which was blank after the image).
I find it hard to believe the printer is remembering an old size (even after being powered off) but if Lightroom is not sending new information, I suppose that is possible.
Allyn

Hi Venu,
Don't know about best-practice, but you can do this by using the file adapter, using the "Run Operating System Command" to execute a print command on the file.
The file can be formatted in a mapping program.
Regards,
Bill

How to create presets for Keyframes in Adobe Premire Pro CC?

Dear Users,
I´m working on a Clip with more than one Video inside. I want to have one video in the back and the other Video on the right lower side (Picture in Picture).
Sometimes the right one should move to full screen and after a few seconds it should go back to the lower right again. This action
will be repeat many times in the complet movie, so I have to create keyframes for the movement (right to full screen / full screen to lower right).
All the time I have to copy the needed Keyframes and have to paste them on the new direction, but this needs many time.
So my question: Is it possible to make presets for the keyframe actions? Means, if I reach a position where I need the action
"right to full screen" I have to klick only one Preset Button and the keyframes will be added at this position!
Hope there is a possibility.
Best regards and sorry for my bad english!

Hello,
You can try the following work around with composition:-
1) Add a you tube video to the page.
2) Drag the video to the target of composition widget.
3) Resize the video to have the size of the target.
The triggers can have the images related to the videos so as to act as thumbnails for videos.
Regards,
Neha

Presets for cropping in CC

I've installed CC and wanted to make presets for cropping. Like 20 by 30 300PPI and more sizes.
But when I want to choose one of them, there only appears one size for all.
How can I make it work? Somebody can help me please?
Thanks, Judith

Maybe I have mad it too quickly after each other.
But when I choose one of the presets I have made. Then you see 19, bij 12,7 by each of them. Just like the second screenshot.
Op 22 apr. 2015, om 08:33 heeft c.pfaffenbichler <[email protected]> het volgende geschreven:
presets for cropping in CC
created by c.pfaffenbichler <https://forums.adobe.com/people/c.pfaffenbichler> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7462836#7462836>
How exactly did you proceed when you created the Crop Presets?
What exactly happens?
Could you please post screenshots to illustrate the issue?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7462836#7462836 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7462836#7462836
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

User Presets for Exporting Files

I want to create a user preset for exporting full size jpegs to a folder to be named later. Whenever I try and save it Lightroom defaults to email. How can I resolve this?
Here are my settings:
Lightroom 4.2
export to hard drive
choose folder later
jpeg format
Adobe RGB
quality=95
Thanks

So, where is the emailing part coming in? Is it not being saved with 'Hard Disk' as the export service ('Export To' field in Export Dialog Box). Or is it being saved OK, but then when you go to use it the problem presents.
Feel free to post the contents of the associated .lrtemplate file in the body of your next post. (hint: 'Show Lightroom Presets Folder' button in Lr preferences dialog box).

Which --Project Properties--Preset for 1920x1080 HDV 1080p30 footage?

Hi,
New to the HD world and have to make lower third for my footage. My media frame size is 1920x1080 and the compressor is HDV 1080p30. (I shot it progressive because it is for the web)
I don't see a preset for HDV 1080p30? Just presets for (HDV 1080i60), (HDV 1080i50), and (HDV 1080p24). Where is the preset for HDV 1080p30 and/or which one should I use to make my lower third over the footage?
Thanks,
-marco

Motion Project presets are not codec specific, they just set up the project size, aspect ratio, field order and frame rate.
Pick one that matches your footage, or you can use "import as project" to create a project based on the footage you import.

Frame presets for lightroom

hi!
i have a couple of photos i want to print in square format. somehow the format seems to g obetter with frames.
does anyone of you know if there are frame presets for lightroom available?
i am looking for polaroid frames, negative frames etc. all this retro stuff.
help ver muc appreachiated.
thanks
jens

thanks for the answer.
didnt think of hat.
so i just would need to get some high res frame images and convert them to .png with a transparent middle.
i can understand that lightroom doesnt support this as it is not a professional feature but it still would be nice.
i want to print lots of square format polaroid photos but printing just square format without any frame doesnt really do the trick.
thanks for your help. it woud have been nice to have function within to be able to vary frame size but i guess i should be happy that there is a way without leaving lightroom.
it is still in the morning and i am not 100% getting it though. would the framesize be affected by the resolution of the image or would it scale relatively always having the same size but varying in resolution and being interpolated?
thanks
jens

Sequence and Capture presets for 16x9 minidv

FCP 6.0.6
checking capture presets for sd mini dv shot in sd 16x9 (US).
what are proper sequence and capture settings?
in sequence setting - should frame size box remain ntsc dv (3:2) and then just check 16x9 anamorphic box?
in capture settings - frame size should it be ntsc dv (3:2) and then check 16x9 anamorphic box?
thanks in advance

Go to the menu Final Cut Pro > Easy Set Up and from the drop down menu choose USE: DV-NTSC Anamorphic.
Click Setup.
That will make all the correct settings at once.
MtD

Capture preset for dcvprohd1080 24p??????

I just shot a bunch of footage with an hvx200. The recording format was 1080i/24p. I am used to filming 720p with this camera and the presets in fcp are fine. There is not a capture preset for 1080/24p in fcp. There is only a 1080/24pa preset, which cant be right because its a totally differnt recording format. does anyone know the right way to capture dvcprohd 1080i/24p?

hvxuser wrote:
I found that most interesting.... but again I ask why do you need to go to all the hassle and it IS hassle of RE-encoding from MXF to QT? I'm editing the MXF files straight.
There is no "reencode", it is a simple transfer and addition of a QT wrapper so that FCP can read the files. Nothing is re-encoded, no metadata is lost, as Ben says. Hassle? What UTTER nonsense! if you rename the clip, FCP knows what links to what, and when you import you can RENAME and ORGANIZE your clips...a KEY thing to an efficient workflow.
Are you telling me you EDIT THE MASTERS? You don't back up your footage at all? So, if your hard drive fails (and they often do), then all your footage is gone. Even if you edit the MXF files directly with Raylight, you ought to back up the masters by copying them to another disk, or LTO, or whatever. Just common sense. I keep my original MXF files on an archive disk and import the files into FCP where I can rename and organize how I please.
In all my time of using the HVX (about 16 months) I've never known FCP to save the Metadata.... even if it hides it somewhere obscure its still a waste as FCP can't intiragate it.... i.e. I did a search this morning for all 720 50p footage shot in Tibet on P2 card serial number XXXXXX.... its an absolute breeze with P2cms. How can you do that with FCP? you can't you have to rummage through potentially 100's of clips.
What metadata are you referring to? All you need are the clip names and timecode information really, and FCP retains that. Even if you rename a clip from 0003FG5 to "man crosses street," FCP knows that MAN CROSSES STREET is tied to 0003FG5. If the drive fails or media is lost, and you reimport, it goes right to the clip.
I don't in anyway doubt your qualification in this field BUT I find it odd that your advocating such a convoluted workflow!
Convoluted? Are you STILL saying that you edit your MASTER CLIPS and don't back them up? And if you do back them up (as you should), doesn't THAT double the size of your footage?
First I program the metadata into the HVX via the SD card. I shoot what I need. I then hook up to my MBP to the HVX and fire up P2cms. I then injest the card(s). Lastly I fill in any outstanding required metadata.
When I come to edit the footage.... I have the powerful P2cms database on hand to find any footage that I need within my collection of 1000's of clips. That then gets dropped into the required sequence. No fuss no hassle!
Sorry to say it but after spending about a year with it all I can say is that Apple's workflow *****
Depends on what you are doing, what you are editing, and what workflow you need. Your workflow works for you, but doesn't necessarily work for everyone. Just like the Importing workflow doesn't work for everyone. A lot of people like and use Raylight and edit the masters right away. ENG crews, people who need fast turnaround. It works. But so does importing and renaming and all that. There isn't ONE way to do things, because there are many many different production types...each requiring a different approach.
Work the way you work...do what you do. Don't knock something because it isn't the way you do it. As the saying goes, "there is more than one way to skin a cat." As long as the cat ends up skinned, what does it matter how you did it?
Eeew.
Shane

Unable To Use DVDSP4 Presets for HD-DVD in the H.264 Format

I recently prepared a 23 minute slide show using Fotomagico from high resolution Hasselblad slides scanned in at 1200 dpi. Within Fotomagico I rendered the Fotomagico slide show to Apple ProRes 422 HQ, took it into Final Cut Pro 6.03 and added an intro and closing section. I then sent this to Compressor and selected the 30 minute HD-DVD preset which uses mpeg2. All went fine with the encoding to mpeg2 and I got a successful build and format out of DVDSP4 after importing the resulting .m2v file into DVDSP4. However, while the disk plays back fine in my Mac Pro it plays back with stuttering (audio and video) on my Toshiba HD-A2 HD-DVD player. I used a Verbatim Datalife DVD+R, but several other discs from other manufactuers including a DVD-R disc showed the same problem.
Please note that I have the latest firmware on my Toshiba HD-A2 and I have successfully burned RL HD-DVD discs using my PC and Windows software (Ulead's DVD Movie Factory 6+) which play fine without stuttering on my HD-A2.
I then decided to send the project to Compressor and use the 60 minute HD-DVD preset that encodes to H.264. Once again Compressor successfully executed the encode of my 23 minute slide show and it plays fine in QuickTime or MPEG StreamClip. However, every time I try and import this .mov file encoded in H.264 using the Compressor preset for HD-DVD into DVDSP4, DVDSP4 brings it in to the assets folder, but after a couple of seconds DVDSP4 crashes. Using console I get a message that DVDSP4 quit unexpectedly due to a "segmentation fault".
I also tried to take the ProRes Fotomagic project in Final Cut Pro 6.02 and send it out with Quicktime Conversion using the H.264 codec. Again I have a file that plays fine in QT, but when I try and import this .mov file into DVDSP4, I get the message "imcompatible format".
In summary, I am completely frustrated after many many hours of work at trying to prepare an HD-DVD on red laser of my slide show in DVDSP4. I cannot figure out what I am doing wrong, and I would be most appreciative of any suggestions anyone may have.
Thanks in advance.
Tom

Am I the only person who has ever tried to use the Presets in Compressor 3 for encoding HD-DVD disks? I would like to use these presets for burning HD-DVD's to standard red laser media as I have done on my PC. With the mpeg2 Preset I can get nothing but stuttering video when played back on my Toshiba HD-A2 and when I use Compressor 3 to encode with either of the H264 presets, the resulting .mov file causes DVDSP4 to crash when I import the file. Has no one else experienced this? Does anyone have any thoughts on addressing these issues other than to go back to working on my PC?
Tom

Presets for size on PSE 12

Similar Messages

Maybe you are looking for