PreSonus AudioBox 44VSL not working on iMac Logic Pro X

MyPreSonus AudioBox 44VSL is not working in Logic Pro X 10.1.1 on my 2014 27" iMac. I installed latest drivers from persons but did not help. It is working in Garage Band, but in Logic it just does not recognize the input source. I have read it "has problems" with usb 3.0. Does anyone know if this thing works and if so, how you got it working?

Have you just recently gotten this computer or have you had luck with it before with this interface? I have used some of the presonus stuff on a 2012 mac book, I believe these are usb3 ports.

Similar Messages

Keyboard keys are not working correctly in Logic Pro X 10.0.6

I was trying to use my MIDI keyboard but for some reason the "A flat" key above "Middle C" no longer works properly in Logic.
At first I thought it was my keyboard but I tried the same key in Reasons and Pro Tools and it works fine in both of these programs.
I tired to see if it would work in Logic Pro 9 but it does not work in Logic Pro 9 either. Prior to my Logic Pro X 10.0.6 update it did work fine.
I don't know what the issue is because it is working fine with the other programs. A little help would be greatly appreciated.

In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
Be sure and delete both files.
(Note: I would first try and delete the control surface preference only, no sense deleting preferences if you don't need to. Also, be sure and use the tilde ~ in the file path above.)

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
How can I make this printer work on my iMac?
I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
I am open to questions or suggestions
Thanks,
Chet

After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
Chet

Apple maps not working on iMac

apple maps not working on iMac the little thing just keeps turning

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Maps.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.

my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.
Any Suggestions?

Restart the computer.

Speed grade does not work on my surface pro 3

Two questions:
Speed grade does not work on my surface pro 3. It open normaly but when I import a video I ear only the sound the image is black.Why?
So I try to install it on a over computer but in the creativ cloud software I didn't it. Why ?

I would suggest you are wasting your time trying to use SG on a Surface Pro 3. SG minimum hardware specifications ask for a discrete GPU that supports a GPGPU language like CUDA http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-speedgrade.html
If you want to do colour correction then try using Adobe Premier effects such as the Fast Color Corrector or Curves.

Why youtube dose not work on my macbook pro 10.6.6?

why youtube dose not work on my macbook pro 10.6.6 ?

Double check you have the latest version of Adobe Flash.

My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
I am getting an error message as soon as I try to connect my Apple TV
An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
it was working fine however after the upgrde it is giving me the above error message

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

Facebook and Hotmail will not work on my Macbook pro

Facebook and Hotmail will not work on my Macbook pro. I have tried safari and firefox. I have unloaded and reloaded an old version of firefox and still no luck. When go to ebay it opens but looks very weird. I am using Mac OS X Version 10.6.6 with a 2.4 GHz Intel Core 2 Duo. I am so frustrated, I have tried everything I can think of and still no luck.

Good of you to offer the detail you did (a lot of people don't bother) but it still is not quite enough. Texting that it "looks very weird" just leaves me blank. Most basic remedy for browser issues is to use Safari to google "adobe flash" and download a fresh file & install. Can't think of anything else given what you've posted....

My appstore app is not working on my macbook pro?

my appstore app is not working on my macbook pro? It simply shows a piece of paper with a pencil, ruler and paint brush.

Hi...
Delete the app and all the associated files using this utility > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
Then re download the app. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
If you continue to have problems with the app you can report it to Apple here > Apple - Support - Mac App Store - Contact Support
And go to the app at the App Store. You should see a link to the app developer's site for support.

Icloud is not working on my macbook pro

icloud is not working on my macbook pro and works on both my ipad and my iphone. Not sure why this is, any help would be greatly appreciated. Thanks for your time.

Yes it has been turned on in system preferences. I've even signed out & signed back in to trouble shoot & the problem still exists. The problem is — while browsing in Safari, I'll hit the iCloud tab on my MacBook Pro & it will be blank, showing nothing opened on the other devices. Then I'll check the other device sitting next to me & they have web pages opened & their iCloud works. Not sure what is wrong, prob need to call Apple...

PreSonus AudioBox 44VSL not working on iMac Logic Pro X

Similar Messages

Maybe you are looking for