Press 1 for English 2 for Spanish

Trying to deal with Verizon is maddening!!!
First I have to call tech support because of an issue on Verizon's end - which was not resolved but "hopefully" by Tuesday someone will be able to look into the matter - needless to say I pay almost $200.00 per month for this setller service.
But after I spend 45 minutes on my phone while they try to figure it out to no avail. Within 1 minute I recieve an automated call on my phone asking for me to take a survey about my experience.
HOWEVER - to do this I need to press 1 for English or 2 for Spanish......when I press 1 for English, the recording starts again, press 1 for English and 2 for Spanish and so on....it simply circled again and again, so of course I was not able to take that customer service survey.
Then for me to even come on the forum to post about the problem with the automated recording - again my username doesn't work, this is the third time this has happened. No it isn't my browser or operator error, it is Verizon website which they haven't fixed yet.
And, they still haven't fixed the issue when you call for support, they ask you for your account number - when you don't have internet service, and you have paperless billing - you - do - not - have - access to your account number.
I do not understand why Verizon has a limit on the number of calls you are allowed to block, because my phone has become useless, even though I pay for this service, I plugged it in recently again, and the spam phone calls continue.
And Verizon robo calls are unwanted as well. How do I block Verizon robo calls?

I had to call Verizon about a problem and got the IVR. It's horrible. Even the TV's noise and the dog barking would mess it up and I have to start over.

Similar Messages

Hi! i have a question. When I start macbook, the guest user request me password, how the off? (Sorry for my english, i speak spanish, la pregunta en españo: al encender el macbook, el usuario invitado me solicita contraseña, como la quito?)

Hi! i have a question. When I start macbook, the guest user request me password, how the off? (Sorry for my english, i speak spanish, la pregunta en españo: al encender el macbook, el usuario invitado me solicita contraseña, como la quito?)

El usuario invitado sirve para habilitar acceso anonimo a ciertas partes del sistema.
Si no se usa, deshabilitalo. Entra a Preferencias del Sistema / Usuarios y Grupos con una cuenta con privilegios de administrador. Haz click en el candado de la esquina inferior, pedira el password de la cuenta. Selecciona al usuario invitado y asegurate que todas las opciones esten des-seleccionadas (sin paloma).

Select 1 for English, 2 for Spanish

How do I go about providing for this option in a UCCX script? As I understand it, we'll have different agents taking the calls. Do I set up 2 separate Queues/CSQs, or do I assign skills to agents as necessary and use some facility in the script to check for those skills?
Any help would be appreciated,

In general you would have two distinct CSQs, one for each language you're supporting. You would skill your agents up appropriately, i.e: assign Spanish to Spanish speaking agents; and following a Menu Step you might set the CSQ appropriately.
Say you have a queue called "Sales" you might have the following Skills:
Sales
English
Spanish
Your CSQs might be as follows:
CSQ_Sales_EN
Sales
English
CSQ_Sales_ES
Sales
Spanish
And your agents:
John (speaks English and Spanish)
Sales
English
Spanish
Janet (speaks English only)
Sales
English
Marie (speaks Spanish)
Sales
Spanish
Finally, your script might look something like this:
This is a basic example, but it should get you started.
HTH
Tanner Ezell
www.ctilogic.com

How can I make the thesaurus work for spanish words?

I have been using pages for about 4 months now, and usually I use it in english. I am currently writing a document in spanish but I can't manage to make the thesaurus, dictionary and wikipedia work for spanish words. I really need this to find synonyms.
Any idea what do I need to do? I don't want to change the whole pages into spanish, nor I want the spanish spell check (I know how to do that), I only need the thesaurus.

Dear me, doesn't Español work?

After up date my I phone 5 will no longer work when calling an automated phone . Press 1 for this or 2 for that. It tells me wrong selection.

Why will my phone no longer work when calling an system with automated dialing, press 1 for this or 2 for that. Tells me not a valid number.

sunshinesunshine wrote:
So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault".

How to stop the message "press 1 for ..."

Hello, while I'm at it...does anyone know how to stop the instructions that get attached to my outgoing voicemail message? You know, the one that says, press 1 for __, press 2 for __, press * to send a fax.....in my old phone (also with Verizon) it didn't have that message.
Thanks all!

I took this problem to a genius. He removed the SIM card and added a new "blank" card from AT&T. Using this SIM we went to setting an turned cellular data off. Then we put the Apple SIM back in the machine. Now you can turn off the cellular so you will no longer get the messages. To end this practice, sign up with a carrier. Just click the button in the Settings... menu.

I have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

i have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

Hi fais,
Following through with what JB suggested. The steps involved in replacing the inner for loop with a while loop are outlined below.
You can replace the inner for loop with a while by doing the following.
1) Right-click of the for loop and select "Repalce" then navigate to the "while loop".
2) Make sure the tunnels you where indexing on with the for loop are still indexing.
3) Drop an "array size" node on your diagram. Wire the array that determines the number of iterations your for loop executes into this "array size".
4) Wire the output of the array size into the new while loop.
5) Set the condition terminal to "stop if true".
6)Drop an "OR" gate inside the while loop and wire its output to the while loops condition terminal.
7) C
reate a local of the boolean "stop" button, and wire it into one of the inputs of your OR gate. This will allow you to stop the inner loop.
8) Drop a "less than" node inside the inner while loop.
9) Wire your iteration count into the bottom input of the "less than".
10) Wire the count (see step 4 above) into the top input of the less than. This will stop the inner loop when ever the inner loop has processed the last element of your array.
Provided I have not mixed up my tops and bottoms this should accomplish the replacement.
I will let others explain how to takle this task using the "case solution".
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

FRM-41009: Function key not allowed. Press %s for list of valid keys.

FRM-41009: Function key not allowed. Press %s for list of valid key.
What is reason for this message, and how can we suppress it. Where should I set the system.message_level to suppress this message.

The reason is you press a key that cannot be used, e.g. duplicate record cannot be used in enter query mode.
You cannot suppress this message, even with message_level 25. If you code this for key-duprec, you will still get the message:
:system.message_level := 25;
duplicate_record;Forms intercepts the error at a very early stage. Even this didn't suppress the message:
if :system.mode = 'ENTER-QUERY' then
null;
else
duplicate_record;
end if;

HT4972 I have an iPod touch 3rd generation with IOS 4.2.1 and the newest version of iTunes. However, when I press "check for updates" it says that IOS 4.2.1 is the current version. How do I update?

I have an iPod touch 3rd generation with IOS 4.2.1 and the newest version of iTunes. However, when I press "check for updates" it says that IOS 4.2.1 is the current version. How do I update?

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

International Address Version for Spanish Language

Hi,
We need to activate International Address Version for Spanish in our system. But i dont find Spanish language in the available Languages activation Screen. Ony Chinese,thai kind of languages are avialable.
If i want to activate Spanish which is not available in the system, what are all the things do i need to do?
Please provide me some inputs on that..
Thanks

Hi,
in the attachment of SAP note 316331 you will find the following:
Excerpt begin
If you do not want to use the proposed SAP standard international address version keys, you
can also create your own address version keys. You can also use transaction SM30 and
maintenance view V_SAPTSADV to create address version keys in the customer name range
0-9.
Excerpt end
As Spanish (Latin-1) is not typically used as address version key, you need to create a customer specific key ...
But please note that this is a rather unusual approach:
Most customers use address versions for Non-Latin scripts only.
Best regards,
Nils Buerckel

My touch pad is no longer responding to hard press downs for drag and drop or copy and paste

my touch pad is no longer responding to hard press downs for drag and drop or copy and paste ability

may be a totally stupid question, but how can I tell?

What does "Press F12 for BBS POPUP" mean when I switch my Equium on?

What does "Press F12 for BBS POPUP" mean when I switch my Equium on?
Any idea? Thanks!

Hi
I presume you are reading the message provided from POST (Power On Self Test)
There you can see different messages.
As far as I know pressing F12 at the beginning of the boot process will enable the boot menu. Then you can choose between different boot options and boot devices;
So dont worry, its nothing unusual.
I think it should be possible to disable this in the BIOS;
Check the option for Boot Settings Configuration / Quiet Boot -> Disabled or something like this.
Cannot remember exactly how the option is called.
greetings

Problem when pressing ENTER for InputText object text

Hi,
I encountered a very strane anomly when pressing ENTER for
InputText object text.
1) I set the InputText object for having maxium 2 characters.
2) I set the InputText object for getting only numbers using
.restrict= "0-9";
Now, say the InputText is now empty.
1) Say I press the number "7" - the text line is now
containing - "7".
2) Now, I press ENTER - the "7" is cleared from the text
line.
Now, while the text box is clear, we think that we can insert
2 numbers.. but not!
3) I press a number, say "9" - the line contains "9"
4) I try to insert another number... but I can't!!
In order to be able to insert two numbers, I have to press
twice the Backspace in order to clear the "9" , and another ghost
note (the ENTER?).
How can I solve this anomaly?
Thanks
Yossi

Thank you very much! it works.
(Those tiny anomalies are so annoying, that it is so great
feeling to have them solved, thanks)

How to handle form close event or escape key press event for user defined f

Experts,
Please let me know how to handle form close event or escape key press event for user defined form...
Thanks & Regards,
Pravin.

Hi
You can catch the form close event like this
If ((pVal.FormType = 139 And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE)) And (pVal.Before_Action = True)) Then
      Try
               SBO_Application.SetStatusBarMessage(pVal.EventType.ToString())
      Catch ex As Exception
                SBO_Application.SetStatusBarMessage(ex.Message)
        End Try
      End If
Hope this helps
Regards
Arun

HT1657 When I press rent for a movie in iTunes nothing happens. It turns green but that's it.

When I press rent for a movie in iTunes nothing happens. It turns green but that's it.

Hi
BUT
This can take times ! - I mean several Hours ! !
Last time I did this it took > 20 Hours (INTEL i7 4x4 processors - 2.2GHz)
AND - remember to connect Your MacBook (or laptop) to Mains-adaptor - as battery might run out !
Still - there is no alternative route to this (repair of iPhoto Library) suggested by Karsten !
Yours Bengt W

Press 1 for English 2 for Spanish

Similar Messages

Maybe you are looking for