Press any key to boot from cd

Every time I start my computer it will automatically go to a black screen saying press any key to boot from cd. When I hit a key nothing happnes. If I start the computer and hit the option key and then select MAC the computer will start. I think this is a boot camp problem because this problem started when I tried to install a windows 7 64 bit (my computer only supports 32 bit) on my computer through boot camp. I now have a fully licensed windows 7 and I'm trying to install it but when I start the computer and press option and hit the windows 7 start up disk nothing will happen.

Kyle,
Sounds as though a do-over is in order. But first, you'll have to make OS X the default in the boot menu.
To return to Mac OS X and make it the default:
Hold the Option key at startup, to bring up the boot menu.
Hold the Control key. The straight selection arrow will change to a wrap-around arrow, indicating a "persistent boot"
While holding this key, click your OS X volume,
Let go of the Control key
Mac OS X will now be the default.
Start the Boot Camp Assistant, restore the original volume, restart, and try again. Read the Installation and Setup Guide carefully this time through. If you have further problems, post your experience in a new topic, as it is likely your issues will be somewhat different.
Nate

Similar Messages

Accidently shut down my Mac Book Pro during Windows 7 installation . When re-starting it says "Press any key to boot from CD or DVD". But keybord is not working . and i have the windows CD inside the drive . Pls hlp me to boot the mac again .

I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .

Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M.

Can't complete windows installation - Stuck at Press any key to boot from..

I am unable to install windows xp service pack 3 or windows 7 on to my iMac running latest boot camp installer. I can start the installation process, but when windows installer completes copying all the files on to the boot camp partition and reboots the system I get stuck at this message "PRESS ANY KEY TO BOOT FROM A CD OR DVD", which won't go away even if I wait for 10-15 minutes. To get rid of this I have to hard reset the iMac by pressing the power button for a few seconds and then boot into Mac HD using the option key.
Please advise if I need to tweak some settings to complete the installation or if you need more information to resolve this issue. Thanks!

I was able to complete the installation process by formatting the windows bootcamp partition through windows installer (and not using Mac disk utility to format the partition into NTFS format). Hope this helps someone.

"Press any key to boot from disc" error Windows 7

I've searched the forum, but none of it seems to help. I tried external usb keyboard, it restarts the whole installation. I had no option to choose between fat32 or NTFS. I was trying to partition a 50 gb on 500 gb hdd.
Is there any solution to this?

I'm having trouble installing Windows 7. And found this article
http://www.product-reviews.net/2009/10/23/apples-boot-camp-windows-7-unsupported -on-some-macs/
does anyone have any idea if and when Apple will support windows 7 for the these late 2006 model macs.....

Satellite C650D-12C No bootable device - Insert boot disk & press any key

Hi,
I have a C650D that was working fine up to a week ago.
It shut down ok, but refused to start up on the next boot.
It comes up saying 'No bootable device -- Insert boot disk & press any key'.
So I stuck in a bootable recovery dvd and the same thing came up, but although the dvd drive 'twitched' when I inserted the disk, it didn't seem to look at it at all when I rebooted.
I rebooted again & pressed F12 to check the boot order. 1st is usb, then cd/dvd, lan, fdd, then hdd/ssd.
I selected cd/dvd and after a few seconds' wait it said 'A disk read error occurred. Press ctrl+alt+del to restart.
Both the harddrive & the dvd drive show up correctly in the bios.
I plugged in a usb dvd drive, put in a recovery cd, rebooted & it started to boot from the usb drive, but then stopped doing anything after the first bit of info came up on the screen.
I tried several bootable cds and they all do the same. They start booting, then freeze. For example, if I put in an XP install disk I get - 'Press any key to boot from cd drive' (the usb one), then 'Setup is inspecting your hardware', then a black screen.
I've tried changing anything that might help in the bios, SATA controller mode, for example, but nothing has any effect on the situation.
Any ideas anyone please?
Many thanks.
EDIT:
I just tried booting from the usb drive with the harddrive removed from the system and the boot process continues normally. If I try & boot from the internal dvd drive though it still fails to see any disk.........

> I just tried booting from the usb drive with the harddrive removed from the system and the boot process continues normally. If I try & boot from the internal dvd drive though it still fails to see any disk.........
Does this mean that if you remove the HDD you can boot from the USB flash drive, but you cannot boot from CD/DVD drive even if the HDD is removed?
It sounds really strange but I think this would mean that either the SATA controller on the motherboard is faulty and therefore its not possible to boot from HDD or CD/DVD drive. Or it could be also possible that HDD and ODD malfunctions. But it would be really strange that both devices would start to malfunction at the same time
So possibly the second idea is not true however, this would mean that something happened to the motherboard.
But try this: access the BIOS pressing F2 at the beginning. Now set it to default settings pressing F9 and then save the changes pressing F10.
Now try to boot again using an Recovery disk

Attempting to install Windows 7 from USB drive keep receiving "No Bootable device -- insert boot disk and press any key" usb drive with windows 7 iso is inserted

As the topic says, i am trying to install windows from a usb drive, when i click install windows and the computer reboots to install a black screen comes up with "no bootable device -- insert boot disk and press any key" the USB drive is inserted and pressing any key does nothing. Help?

You need to follow these guides to install from USB drive
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed -100-working-guide/
good luck

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau

Error message on screen: No bootable device -- insert boot disk and press any key comes on

Error message comes on screen: No bootable device -- insert boot disk and press any key. What do I do?

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If the above is not possible or failes, then replace your hard drive.

"No Bootable Device -- insert a boot disk and press any key" Error Message.

Last month I just got a HP netbook (HP Mini 110-3100) and when I got it from the box, the error message; "No bootable device -- insert a boot disk and press any key" appeared. But then I managed to boot up the netbook normally. After that, I can use the netbook normally but the error message keeps appeared and becomes more frequent and now I even cannot turn on the netbook.
Is it a hard disk failure?
p/s: yesterday accidentally I can turn on the netbook without any problems. Did a lot of Hard Disk Maintenance by some softwares downloaded from the internet. But now already cannot turn on.
p/s/s: i have no cd/dvd drive, and also no 8GB usb drive.
p/s/s/s: what should i bring if i want to send the netbook to the HP centre? just bring the netbook?

I would suggest try and reseat the hard drive and check...If you still have the issue, than take it to the service center...And you will need to take only netbook to Service center...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HP Pavilion g6-2330dx. "No Boot Device. Insert boot disk and press any key" Memory test failed

Hi. So I am trying to help a friend with her laptop. It's a HP Pavilion g6-2330dx.
Product #: D1C01UA#ABA
Serial #: [Personal Information Removed]
Windows 8
ADATA 4GB RAM
Toshiba 640GB HDD from the looks of it.
The laptop is unable to boot into Windows, so I suspect the hard drive. But I ran the hard drive test and it passed all the tests. The SMART test and both the short and long test. I ran the tests multiple times and it passed each time. I tried reseating the hard drive and still no go. I also removed the HDD and connected it to my desktop PC to see if it detects and it did. Ran the Windows 7 own HDD test and it passed.
Currently, there doesnt seem to be any operating system at all on the HDD. When I check, there is a C: drive of ~90GB partition that is ~90GB free, but inside there are Windows files/folders. There is also a D: drive Recovery partition that says ~26GB with only ~2GB free, but when I go inside there's only ~350MB worth of data.
So then I ran the memory test (in BIOS) and it failed immediately. I reseated the RAM module. I tried the other slot. It still failed. So is it safe to say the memory is the cause of this problem?
Pressing the F11 key that is supposed to take me to the System Recovery only leads me back to the black screen with "No Boot Device. Insert boot disk and press any key"
I even tried to install Windows 7 to see if it'll work. I was able to get the laptop to boot/read off the Windows 7. But when I click to install, it asks for a boot device driver or something like that.
My friend doesn't have the recovery disk either. I guess she lost it.
Anyway, is it as simple as replacing the memory or could it actually be the HDD (even though it passes)?
EDIT: This is what the System Log in BIOS says
0021           Time: 10/13/2014
03F0           Time: 10/13/2014
03F0           Time: 10/13/2014
The date was the first time I ran the tests. I havent received those numbers (error codes?) since.
EDIT: Just for kicks, I ran Memtest 2.11 just now (forgot I had the disc) and it immediately went red with thousands of errors, hah.

Hi bghs,
Welcome to the HP Forums!
It is a fantastic place to find answers and information.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you were unable to boot into Windows, and you suspected the hard drive and tested it, but it passed both short and long test. With that being said and the fact that it also passed leads me to believe the hard drive is fine.
You tested the memory and it failed. You tried reseating and swapping slots but they still failed the test.
I would test each card individual with the memtest to determine if it is just one or both cards that have an issue.
When you installed it in another computer, you did see the recovery partition. Once the memory issue is resolved, if you are still unable to boot into Windows, I suggest you do a recovery with the minimized image.   Here is a link to Performing an HP System Recovery (Windows 8) to assist you with that process.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Mac Mini - "No bootable device - insert boot disk and press any key"

When trying to install windows 8.1 from dvd on late 2012 Mac mini.
When the machine reboots after creating the ms-dos partition. I receive the foolwing error
No bootable device -- insert boot disk and press any key
The only drive I have connected is the Superdrive
Can someone please help me

Welcome to Apple Support Communities
Turn off your Mac by holding down the Power button. Then, turn it on and hold the Option (Alt) key until you see all bootable devices in the screen, so choose your Windows 8 disc and follow the steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Problems with Bootcamp Assistant: no bootable device -- insert boot disk and press any key

Hello Guys,
I got a problem setting up Windows 7 on my recently bought 13" MacBook Pro (2,3Ghz Core i5).
I used the bootcamp assistent to create a partition of 50GB on my Mac, everything is fine until now. I insert the Windows 7 disk and follow the instructions. But when I restart in spite of starting the installation of Windows 7, a black screen appears with a note saying "no bootable device -- insert boot disk and press any key". To exit this screen I then have to restart my Computer again, holding down the alt-key. In the following window I can just chose my Mac-Harddrive to boot from, the partition is not shown.
I used the software actualization tool to update to version 10.6.7 which is the most recent one i think.
The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
So as I said, I downloaded the Version of Windows 7 Professional with Service Pack 1 (x64) on my computer and then burned on a DVD. I want to add, that the file I downloaded turned out to be an iso file. At first, I just burned this file on a DVD but since it turned out that i got the above mentioned message, I burned a second DVD with the actual files of the iso (with foldernames like autorun.inf, boot, bootmgr, bootmgr.efi, efi, setup.exe, sources support, and upgrade)
I dont know if these details are of any relevance, but i guess it may be useful since I believe that the burning thing could cause the problems.
I have already browsed the Forum for quite some time now, but I didnt find a case with the exact same problem that I have, so I decided to rather ask you for help now instead of killing my brain like I did before (and I dont really have a clue neither of Macbooks nor of Windows-Computers, its always try and error for me)
I hope somebody can come up with some helpful ideas or a solution.
If you need further details on my system or anything, please feel free to ask
Thank you very much,
David

The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
Apple Disk Utility won't do a proper job and won't work (and it varies, some can start the install but fails later) Has to be burned at 2X Reduced Burn Speed
Also check the support articles for bootcamp
Apple Boot Camp Support

Help with "No bootable Device -- Insert boot disk and press any key" problem

Alright, I am on an Early 2011 17inch macbook pro. I have removed the superdrive to install a secondary disk drive for mass storage, then replaced the original one with an SSD blah blah blah. I do everything from the books, run bootcamp, make my USB windows 7 bootable in Bootcamp, go through everything and allocate 65gb towards windows. I have tried 4 different USB sticks and 3 different ISOs. Every time I try it, I get the same "No bootable device -- insert boot disk and press any key". I then have to hold down the power button, then restart, hold down option/alt key, and boot regularly into mac. I also read that holding option/alt whilst starting the macbook pro will show the windows USB stick, well it never appears. I dont know what I need to do, what I am doing wrong, but nothing is working. I guess the last thing I have to try is buying a superdrive and burning ISO to disc then try that. But I dont want to go out and spend more money. Other people have gotten it to work just fine from USB, I dont know what I must do or what I am doing wrong...
Open to suggestions and in desperate need of help. Anything is appreciated.
Thanks!

Don't bump
get a new usb2 only flash drive and try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0
How to install Bootcamp on a 2009 Macbook Pro that does not have a disc drive

Bootcamp Win 7 No bootable device -- Insert boot disk and press any key.

Hello everybody, I bought a windows 7 to install with bootcamp in my MBP retina, it came buy post, a windows 7 ultimate, OEM, and for my surprise it came with a DELL computer reinstallation CD, well, I search the Internet and some guys were receiving the same CD, and the web sites were saying that it works perfectly. So, I started to install it with boot camp.
I format my USB 16 gig from scandisk for (DOS FAT) in utility's on my mac, and I went to BOOT CAMP to install the windows. As I have a superdrive and the CD from win 7, I didnt select the option of creating a image of windows 7 (the first option) and I just select the other two. So the bootcamp asked me to connect my USB stick for downloading the windows drivers, and after downloading he opened the partition screen, I choose 30 gig for my windows partition and pressed continue, after that the boot camp asked me if I have a windows installing cd, and I clicked yes, Next window, " If you have an installation CD the boot camp will delete the boot from your USB stick, press continue, and I did. After that my mac reboot, and now I have the message " No bootable device -- Insert boot disk and press any key"
It doesnt boot with the USB stick.
It doesnt boot with my cd
ALT CMD doesnt work.
No MAC no Windows? Sheeee
Please help me if you can.
I have done a backup before.

You should take your Boot Camp discussion to the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp, where the "no bootable device" issue has been asked and answered many times.

No bootable device -- insert boot disc and press any key

Hello, I'm trying to install Windows 7 on BootCamp. I have iMac 2010. My CD-ROM is broken, i can't put CD into it. So, i use external CD-ROM. I burned DVD with windows 7 ISO file, started BootCamp Assistant, My computer restarted and then i have black screen with "No bootable device -- insert boot disc and press any key
So i can't continue installing Windows. On Mac os DVD is visible and everything is OK, but when restarting - i cant boot from it. How to install it?
Thank you.

hrsrt wrote:
I burned DVD with windows 7 ISO file
Just burning a ISO onto a DVD wont make the DVD bootable.
Look here: http://support.microsoft.com/kb/977640
Lupunus

Press any key to boot from cd

Similar Messages

Maybe you are looking for