Press release from FCC concerning tethering.

Note, this applies to those with tiered data only. Unlimited data users are not part of the settlement. So nothing has changed if you have the Share Everything Plan since tethering is included
http://www.fcc.gov/document/verizon-wireless-pay-125-million-settle-investigation
VERIZON WIRELESS TO PAY $1.25 MILLION TO SETTLE INVESTIGATION INTO BLOCKING OF CONSUMERS' ACCESS TO CERTAIN MOBILE BROADBAND APPLICATIONS
Washington, D.C. – Today the FCC's Enforcement Bureau released a $1.25 million consent decree with Verizon Wireless that resolves an investigation into whether the company had fully complied with the FCC's "C Block rules," requiring licensees of C Block spectrum to allow customers to freely use the devices and applications of their choosing.
FCC Chairman Julius Genachowski said "Today's action demonstrates that compliance with FCC obligations is not optional. The open device and application obligations were core conditions when Verizon purchased the C-block spectrum. The massive innovation and investment fueled by the Internet have been driven by consumer choice in both devices and applications. The steps taken today will not only protect consumer choice, but defend certainty for innovators to continue to deliver new services and apps without fear of being blocked."
Verizon Wireless offers customers its 4G LTE service on C Block spectrum. Verizon Wireless bid at auction to acquire that spectrum, understanding that it was accompanied by open device and application obligations. Specifically, licensees offering service on C Block spectrum "shall not deny, limit, or restrict the ability of their customers to use the devices and applications of their choice on the licensee's C Block network," subject to narrow exceptions.
P. Michele Ellison, Enforcement Bureau Chief, said "This case was the first of its kind in enforcing the pro-consumer open access obligations of the C Block rules. It underscores the agency's commitment to guarantee consumers the benefits of an open wireless broadband platform by providing greater consumer choice and fostering innovation."
The Bureau launched an investigation after reports suggested that Verizon Wireless had successfully requested that a major application store operator block Verizon's customers from accessing tethering applications from its online market. ("Tethering" is using a wireless phone as a modem to obtain Internet access for another device, such as a laptop computer or tablet.)
The Commission also received an informal complaint alleging that Verizon Wireless had violated the FCC's C Block rules by making such a request. At that time, Verizon Wireless's terms of service required all customers who wanted to use their phones for tethering to subscribe to the company's Mobile Broadband Connect service, at an additional charge. In response, Verizon Wireless stated that the additional fee reflected the fact that customers who tether laptops or other devices have the capability to use more data capacity than others. At the time of that response, however, Verizon Wireless required not only unlimited data plan customers, but also customers who paid for data on a usage basis, to pay the
additional fee. Verizon Wireless asserted that third-party tethering applications could enable its customers to tether without paying an additional fee.
Under the terms of today's settlement, Verizon Wireless will make a voluntary payment to the Treasury in the amount of $1.25 million, and has committed to notifying the application store operator that it no longer objects to the availability of the tethering applications to C-Block network customers in the operator's online market. Verizon Wireless has also agreed to implement a compliance plan, requiring that:
· employees will receive training on compliance with the C Block rules;
· future communications with application store operators regarding the availability of applications to Verizon Wireless customers will be reviewed in advance by legal counsel; and
· Verizon will report any instances of noncompliance with the rule at issue that might occur during the two-year term of the plan.
In addition, the company recently revised its service offerings such that consumers on usage-based pricing plans may tether, using any application, without paying an additional fee.
-FCC-
For news and information about the FCC, please visit: www.fcc.gov

PJNC284 wrote:
Every blog online. lol.  And maybe it's just too late in the day for my brain to think, but it doesn't say anything about not applying to unlimited customers just that they recently started the Share Everything plans which have it included.  And they can't really use the reasonable network management as an excuse if the average customer only uses 2GB or less eh?
Yea, I am not seeing the Unlimited plan users not being included in there anywhere, actually it includes the unlimited in addition to the tiered plans.
At that time, Verizon Wireless's terms of service required all customers who wanted to use their phones for tethering to subscribe to the company's Mobile Broadband Connect service, at an additional charge. In response, Verizon Wireless stated that the additional fee reflected the fact that customers who tether laptops or other devices have the capability to use more data capacity than others. At the time of that response, however, Verizon Wireless required not only unlimited data plan customers, but also customers who paid for data on a usage basis, to pay the
additional fee. "

Similar Messages

  • Hyperlink URL for an iweb page for press release

    I am writing a press release in Word and I want to create a hyperlink in Word directly to the third page on my iweb site which is http://web.mac.com/decouvrir/mamaloosemusic/Welcome.html. But that adress is for the welcome page. But I want to get directly to another page.
    The other page name on my navigation bar is Mamaloose, but the internal title in my iweb list is "mamaloosecorpinfo". What should the resulting URL be in order to go directly to that page?

    Okay, firstly you need to sort out your site name. Is this your site here? http://web.me.com/decouvrir.
    Your url link does not work, so there is something wrong somewhere. Go into iWeb and check your site name and perhaps re-publish. Also, you need to be using web.me.com and not web.mac.com as you have.
    Also, if you are linking from a Word document, it is not the navigation menu that you need to link to, it is the page name from the url and you need to link to in iWeb - so it does not matter what your navigation link is, if you named your page "mamaloosecorpinfo", then your page will be this that followed by .html and it is this that you need to link to, to take you to that page of your website.

  • Need to be "released" from Veizon Blackberry Server to get BIS in New Zealand??

    I have a Verizon Blackberry Tour that has been unlocked.  I am now with Vodafone New New Zealand and have registered for Blackberry Internt Service with Vodafone.  It does not currently work - Vodafone tells me that the phone is registered on Verizon's Blackberry server and I need to contact Verizon to have it released from their server before Vodafone can provide me with BIS.  Verizon tells me that because I never had a plan with them, the phone is not registered on their server (not sure I believe that, but....).  Verizon has told me to contact Blackberry as the phone would have to be released from a Blackberry server.  This doesn't make sense to me ... but I can't seem to find a way to talk to someone at Blackberry to find out.  Can anyone help?

    It makes sense to me, in that whoever used the device prior to you, did not "remove" the PIN from their account. Hence, the device remains registered on the previous account.
    Verizon will need to do this. RIM doesn't do this. It is a common question asked here of users purchasing used devices. Call Verizon.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to find out the batches released from ASCP

    hello gurus,
    Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
    Thanx & Regards

    Hi,
    You can check it in SM59 if there are any RFC destinations for the above systems.
    Alternatively ,check the table RFCDEST if any entries are maintained
    Regards,
    Lakshman.

  • When i press back from status bar - it hanged, BI 7.0 Front end:7100...27

    Dear all,
    when i press back from cube data display , i cant get previous screen, have to do stop transcation,
    my front end ver:7100.1.0.1027 and patech level 0, should i install patch level 1,
    OR is there any not avialable for fix that,
    and find is also not efficient in nw 7.0.
    Best regards,
    dushyant.

    Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements

  • [svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

  • PO is not getting released from SRM

    Dear Experts,
    I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
    (SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
    Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
    when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
    Kindly let me know is there any t-code for enable communication between SRM and SUS?
    I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type  but
    PurchaseOrderRequest_Out  for PO transfer is not  getting triggered in sxmb_moni in SRM.
    Thanks in advance.
    Regards,
    Pawan Keshwani

    Hi,
    Thanks for your reply.
    I have configured  Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
    And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
    (CCMS  monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
    I am configured ESOA Architecture in XI  for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
    Not getting any messege in SXMB_MONI in SRM.
    Regards,
    Pawan Keshwani

  • Authorized sold-to party and other BP to release from contract

    Normally, both sold-to party and other business partners are authorized to release from a contract. To meet this requirement, maintain configuration in sales document type
    Which field in the document type determine the release ?
    thanks,

    Hi,
    VOV8 - sales order type
    select sales order type --> details
    Contract Tab -->Check partner auth. field
    Regards
    Senya

  • Posting Press releases, etc. to online newsletters

    Hi,
    I have to post a number of press releases to online newsletters. The only format accepted is html for the submissions. I was able to do this for years with Word but I cannot find the option in Pages. I know it is probably as simple as Word but I can't locate it under save as, export, or print. Any help gladly appreciated. Thanks!
    (I do have iWork '09)

    Pages in iWork '05 & '06 had HTML export, but it was so bad, it was dropped in '08. You could use TextEdit to export as HTML.
    FYI: You've posted your question in the "previous to iWork '08" forum. There are separate forums for the iWork '08 & '09 applications.

  • Sales order released from Credit block, but Purchase Requistion not created

    Hi,
    In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
    Here my scenario is
    I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
    There is no issue from security side, we activated trace and analysed everything it is not security issue.
    Thanks and Regards
    Alokam Chandra Sekhar

    Hi Lakshmi,
    Thanks for reply. I followed your instructions, pls find my observations below.
    1. Can you check the below settings:
    What is the Credit status in the header status tab page of the sales order for the B's sales order?
    Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
    Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
    2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
    Reply: Both the orders has same information, like material Item category and scheduline category
    3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
    Source list has been verified through ME03 transaction and vendor data maintained correctly.
    I really appreciate your time and efforts on this.. looking forward some more suggestions...
    Thanks and Regards
    Alokam Chandra Sekhar

  • When I upload photos to iPhoto from my iPhone and then press delete from iPhone it does not delete them, how do I fix this?

    When I upload photos to iPhoto from my iPhone and then press delete from iPhone it does not delete them, how do I fix this?

    I am having the same problems as this person. I see that someone said there is no way to retrieve the pictures once it gets stuck in recovery mode.
    Then further along someone said that there are data retrieval methods except they have something to do with jail breaking a phone.
    My phone is already jail broken. It was kind of a gift from the company I work for- it was a fellow employees before. He jail broke it and then it was given to me. After I got it I activated the 4 and tried to back up everything. It didn't work and "Springboard" forced the phone into safety mode. So I could use it with the old dude's apps and my contacts. I made the mistake of using the phone for wedding dress shopping with a friend. I took tons of pictures.
    After this I found out the messages I was seeing meant it was jail broken. At&t said to force restore the phone - iTunes wouldn't recognize it in safety mode. I'm an idiot and didn't realize what this meant for my pictures. It didn't work (error 1611) - thankfully. Now it is stuck in recovery mode (iTunes icon and USB cable picture).
    Can I access that media in any way? It never suceeded restoring itself so is it still there? The phone is jail broken already so is there a method I can use?

  • I've preordered an album and one of the songs released from that album hasn't downloaded

    I pre-ordered Katy Perry's Prism and dark horse was released from it but it hasn't downloaded into my itunes library. WHen I view the album/song in the iTunes store it's labeled as purchased and doesn't show a link to downlad.

    I had this problem too, so I just went into my account and cancelled the pre-order.  It took an hour or so to update but I was then just able to go in and buy the track normally.
    Hope this helps

  • Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

    hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

    BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
    Mylenium

  • Released from iphone contract

    I purchased an iphone in November and it was activated onto an iphone tariff.
    After months of billing/payment problems o2 have released me from my contract 13 months early so that i'm no longer in contract with them.
    I'm puzzled as to what to do with the handset now, i'd rather use it legit so that I can receive apple updates and the like but obviously I want to be able to use it but if I put another sim card in it will just reject it.
    Now when I put another o2 sim card in it's searching for activation.
    I tried emailing o2, no reply suprise
    I've been released from the iPhone contract by o2 because of their mistakes. I've paid £269 for a handset I can't use now, and that's o2's fault so they should fix it. No doubt they didn't think they'd have to deal with this for another 13 month or so. I bought an iPhone and activated it onto an iphone tariff and have used it for 5 month, I've now been legitimately released by o2 themselves.
    I might actually be the first legitimate iphone user without a contract which is why no-one at o2 can tell me what my rights are with the handset, now.
    any ideas?

    I'm fine about using o2, but i've been through **** with them over my contract - why should I be tied in for another 18 months?
    These are failings of o2 and i'm now left with a £269 phone I can't use or the option of taking an further 18 months with the company that got it wrong in the first place! If i take another iphone contract with them i'll have been on the iphone tariff for 23 months, that's ridiculous. I'm essentially out of contract with o2, i've finished the contract - so the phone should be free for me to do what I want with it. I've finished all my obligations, and i'm in the exact position other people are going to be in 13 months from now when there contracts end!
    I've paid £269 for what is essentially a very pretty paper weight.

  • Problems sorting multiple releases from the same year

    Hello,
    I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
    However,
    I have now encountered a new (minor) problem where there are several releases from the same year.
    For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
    It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
    Am I just being too picky?
    Thanks people. My head hurts.

    Hello,
    I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
    However,
    I have now encountered a new (minor) problem where there are several releases from the same year.
    For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
    It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
    Am I just being too picky?
    Thanks people. My head hurts.

Maybe you are looking for