Pressed "0" during power on to recover, now its stuck in a loop..
Pressed "0" during power on to recover, now its stuck in a loop.. Can't get back to my normal "C" desktop anymore... how do I DISABLE this "system recovery flag" so it will boot normally back to my OS? Even in safe mode, the system recovery box always pops up. Can I disable this script somehow?
What model is that? I just wish the system restore box would open once, for me.
Similar Messages
-
My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
i tried to update my software to 10.9 and forgot i had a disc of pictues in the computer. i stopped the istall as it was trying to go onto the disc of pictures. now its stuck on the os x page and i cant get it to my home screen. can anyone help?
I'm not really sure what you mean by "the os x page". It sounds like the installation did not complete.
I would try this:
hold down the power button until the computer shuts down
take out the disk with the pictures!
restart and see if it will boot up
if it boots up normally, I'd probably try to repair your HD: Boot into your recovery partition (hold down ⌘R at restart until you see the Apple symbol), go to Disk Utility, and repair your hard drive. While you're there, repair permissions too. OSX Tips Using the Recovery HD
Then I'd try to reboot and run the installer again. I think it's a good idea to do the installation in safe mode : Mac OS X: What is Safe Boot, Safe Mode? .
if it won't boot up normally, I'd try booting from the recovery partition and repairing your HD.
if it won't boot into the recovery partition, your options are:
Try to repair your hard drive with internet recovery: OS X: About OS X Recovery
If you have access to another (working) Mac and a USB thumb drive, download Recovery Disk Assistant, which you can use to repair your hard drive or reinstall OSX: OS X: About Recovery Disk Assistant
Try to boot into single user mode and repair your hard drive: Repair Your Hard Disk in Single User Mode | Everything Macintosh -
I had my ipod touch 4th generation plugged into my sterio and i tried to swipe open my pinger app and now its stuck on the load screen for the app and wont do anything at all its frozen. How do I fix it??
Reset your iPod. Hold the power and the home button for 10 seconds till the iPod restarts. No data will be lost.
-
I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?
I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.
-
I tried to update my phone to the new system but i removed it from my cpmputer and now its stuck on the connect USB to itunes screen.....HELP
Hello the_generator2003,
It sounds like after having disconnected the iPhone physically during the update process, the phone appears to be stuck in recovery mode. If you have followed the onscreen image, and reconnected the device to your computer, then I would start by resetting the phone and trying again:
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue is not resolved, then try putting the unit into recovery mode again with this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thank you for using Apple Support Communities.
Cheers,
Sterling -
when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
tried updating my phone to iOS 5 and it got to the restore screen then locked up and now its stuck on the itunes screen. how do i fix it?
http://support.apple.com/kb/HT1808
-
I updated my iphone but now its stuck on the apple logo
I have an iphone 4, I updated my iphone to the lastest update it restarted and installing the update but now its stuck on the apple logo.
My home button does not work prior to this, so I do not know how to get off the apple logo and get my phone back. HELPPPP!!!!!!!Hello WAGHAT,
Thanks for using Apple Support Communities.
You will need to get your phone to enter in recovery mode, as the article below dictates.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If your home button is not working however, you will first need to get that fixed before being able to enter recovery mode. The link below has more details on getting service for your iPhone.
iPhone Repair - Other Repairs
http://www.apple.com/support/iphone/repair/other/
Take care,
Alex H. -
bought original ipad off craigslist..restored it in general settings to start frsh and now its stuck in "connect to itunes" mode on the screen and im going to LOSE IT!!!!!!!!!!!!!!!!!!!!
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom -
Just updated to ios6, tried to update an app and now its stuck "waiting". Like that for 24 hours, mail is OK, web browsing OK but cannot unblock the apps thing. any ideas?
Try update using iTune (Check for Update; see bottom right)
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/52351097ee11e908a25 cdaa4c9483fdd_zpsbaeae828.jpg -
I powered off my ipod touch and turned it back on and now its stuck on the apple logo
I turnred ipod touch off and few seconds later, i turned it back on. Now its stuck on the apple logo for more than 6 hours.. :/ anyone knows the proble? D;
Can't connect to the iTunes Store
-
How do I fix my Ipad, tried to update it, now its stuck on a screen with a cable pointing towards itunes and asking me to restore, but i cant, it tells me that restore was interrupted because of a corrupted file.
If you want to manually download the update go here.
http://osxdaily.com/2013/01/28/ios-6-1-released-download/
If you want to try recovery mode which is what Apple recommends if you are unable to update or restore your iPd, go here.
http://support.apple.com/kb/ht4097 -
i reset my ipod and now its stuck on the apple logo what do i do to fix it? reset my ipod and now its stuck on the apple logo what do i do to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Trying to set up my old iphone 3g for dad i went to update it and then it said it needed recovering so i did now its saying recover cant be made and everytime i turn it on its stuck on connect to itunes screen bought the phone a while back can someone please help.
does it give you a error message or just puts you through a loop
Maybe you are looking for
-
Enable of Goods Receipt Indicator in PO
Hi Experts, When I am using the combination of Account Assgt. Category "N" (Network) and item category "D" (service) in ECC 6.0 to create PO (ME21N) for Invoicing Plan in item details of "Delivery" tab, the Goods Receipt indicator was made in checke
-
Hi, As the user types the character in text box, filtered list should be shown below the text box and user can select the item from the list. For e.x. In yahoo mail if type in 'To' text box, filtered list will appear dynamically depending on characte
-
Hi, How we will automate and schedule the planing refresh? and What is flat file adapter and Planning adapter? could any one tell ans plz Thanks, Kumar
-
Line reset after faults in area
Hi, A fault in our area caused my line to drop dozens of times yesterday. Now I am stuck at 12 db SNR and a slow connexion and low IP profile. Now the faults in the area have been fixed can I get a mod here to carry out a reset on my line to get me b
-
I have a toshiba laptop with windows 8 installed. i also have an ipod touch. the ipod is recognised when plugged in but when wish to drag music from itunes onto ipod red circle comes up not allowing me to do syncing. help