Pressed "start transformation" button in test tab
I created Data Type/Message Type/Message Interfaces/Interface mappings/Message Mappings for source/target system.
when I pressed "start transformation" button in test tab in message mappings, I get a error:
Mapping object MM_xxx incomplete. Unable to continue execution
structure with min!=max without mapping
Please help me,many thanks
Mikenl,
Usually this type of error comes when the mapping is not properly done . and Mandatory target fields are not mapped .
there are plenty of threads in SDN with the similar problem . Kindly go thorugh them .
http://forums.sdn.sap.com/search.jspa?threadID=&q=%22Unabletocontinueexecutionstructurewithmin!%3Dmaxwithoutmapping%22&objID=f44&dateRange=all&numResults=15&rankBy=10001
Regards ,
Similar Messages
-
Hello to everyone!
I want to ask if there is any add on to firefox which I can reload all tabs from offline mode to online mode immediately without press the resend button for each tab all the time.is it illegal to record a conversation without the other caller knowing?
That depends on where you are... In the state of New Jersey, where I live, I believe that it is legal to record a conversation if at least one party to that conversation knows that it is being recorded, and there is no legal duty to inform the other party that the conversation is being recorded.
This means that I could legally record all conversations I have with other people within the state of NJ, and likewise anybody whom I call or who calls me can record out conversations. However, it would be illegal for a third party to record out conversation without our knowledge and consent.
Now the situation becomes more complex if I call somebody, or somebody calls me, across state lines... I've not made a study of the laws in every state, but I would not be surprised if there are states where both parties must give consent for the conversation to be recorded. This is probably the reason for the announcement "your call may be monitored and recorded for quality purposes" at the beginning of every call to customer support...
Wikipedia has a useful introductory article, and a quick Google search turns up much more information.
http://en.wikipedia.org/wiki/Telephone_recording_laws
http://www.google.com/search?q=legality+of+recording+telephone+conversations&ie=utf-8&oe=utf-8&safe=...
K.. -
ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Every time I press the home button a new tab opens. How do I stop this?
When I push the home button to go to my home page, the firefox loads my home page but also opens a new tab with the firefox home page with the google search bar.
How do I stop the new tab from opening. I can't find it in the options page.Tools>Tab Utilities Options... Then un-check Home under the Open new tabs group
-
Ever since i have started using the latest version 4,0,1, sometimes when i press the back button it opens 7 tabs automaticcly. I have checked my registrey and run several scanners but nothing can be found So whats the problem or were can i check??
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
recently recieved a second hand Iphone 4. I was testing the Camera, the rear one worked perfectly fine, however when i pressed the switch button the front facing camera shutter freezed and started flickering. In order to get it back to the rear camera I have to reset my settings. Does anyone know why the front facing camera is doing this and how i can fix it.
iPhone 4, iOS 5.1.1I would ask the person you received it from if they've had this issue.
You can completely close out of the camera, then do a reset, hold down the home/power button together until yo usee the apple logo and then release, then wait for you phone to boot back up. -
Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Help - HP Pavilion a6030.uk desktop. Have to press the power button multiple times to start up?
Hi,
I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.
My computer has had no problem at all until yesterday for some reason i had to push the power button multiple times to start it until it finally turned on and did the normal start up. Such as i would press the power button as normal to start it, but all of a sudden, it would turn off after about 2 seconds, and so I would press the power button several times and each time it would not start up and turn off, so the power button would be pressed again until it would finally turn on and start up and run as normal and seems to work fine. And it was the same today, i pressed the power button mutiple times (e.g. 6 times) until it finally started as normal.
As im not very knowledgeable or very computer/technology savvy wise in this area, please will someone help me and give me some advice/help to fix/solve this.
Thankyou for taking time to read this and any help would be much appreciated to resolving this problem.
Thanks.
This question was solved.
View Solution.Vonbon90, welcome to the forum.
When I see these symptoms on an older computer, I believe that it may be a failed/ing power supply unit (PSU). Here is a guide that will help your troubleshoot it.
Also, you could test the memory. This can be done by removing all of the memory modules and replacing them one at a time and booting.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?
You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
Report is not starting an adobe window when pressing the print button
When ever I press the print button on my report and I get the box that asks you which page to print. I choose all and then press the ok button. Nothing happens when I press the ok button. I'm I missing something on the server that is running the application. It works locally but not on my test server.
Thank youWell, in order to print using PDF, you must have adobe installed...
I understand that you have some CR Service Pack installed, but I am not sure which one. I'd recommend you download SP 5 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
And use the msm to install the runtime. The SP 5 msm is here;
https://smpdl.sap-ag.de/~sapidp/012002523100001088442009E/crxir2sp5_net_mm.zip
Re.; I was wondering I am missing something from the server that converts the report to pdf and shows it in the adobe viewer.
Not that I am aware of.
If SP 5 does not help, a question for you; can you print any pdf document (non CR) from adobe on that server?
Ludek -
P35 Platinum: I have to press the power button multiple times to start
Hello fellow MSI customers,
as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
What I tried:
1. Boot using only 1 piece of memory stick
2. Boot using only 1 piece of memory, but different one
3. Use another pair of memory <- worked, but on that day it also worked using my original memory
4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
5. Tried all of the above with a different processor
6. Used another power supply
Any other ideas?
Here are my specs:
MSI P35 platinum
Core2 Q6600
Nvidia 7900GT
4GB V-Data DDR2 800MHz <--- I think this is the problem, any experiences?
Enermax Liberty 400W
a few other things (HDDs, XFi, DVD-RW)
By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
Thank you for any help, muro
And just to let a bit of steam off:
1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro -
Hi I have an Imac I5 21.5 inch.It was working perfectly.Then i didnt use that for about 2 months. Week ago when i want to start the Imac ,it didnt start.
When press and hold or keep on pressing the power button then i hear the fans are working and i get a continuous beep( but low freqency tone).
But screen does not turn on.Please help me to rectify this problem.Best Regards. By the way I am an electronic technician.So if there are any technical things to be done, Pls let me know.I can do it my self.Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk
yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...
-
???? How do I power up my iPad? My iPad won't power up. It just stays a black screen. Tried the start up button, the home button, pressing them down and holding.
Could be the battery is completely drained. Use the charger that came with the iPad and plug that into a known good wall outlet. Let it charge for at least an hour. Then, while it is still plugged in reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
If the device restarts let it remain on the charger until the battery indicates 100%. If it still will not turn on Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
Maybe you are looking for
-
I am trying to purchase 0ffice 365 for small business after having the trial, it goes through to the payments screen but does not show any buttons to complete the process. My trial is due to run out today so I need assistance so that I can carry on w
-
Why is it that when i give the user[0] a certain name (with the setName method), all users (user[0] to user[100]) get that name? public class UserProfileDataBase public User [] arr = new User [100]; public UserProfileDataBase () throws Incomp
-
The other error message I get every day is that a script isn't working, and do I want to stop the script? Is this my computer or your program causing the issues?
-
I want to extract the Solaris media using "unpackmedia" option
pack and unpack options operates on only miniroot archives and not on whole Solaris media. I want to extract the Solaris media using "unpackmedia" option. unpackmedia option of root_archive internally extract miniroots and additionally it extracts X.
-
Can not download the lastest Software update
I want to download all of the latest software update to my Ipod. I have done what it is supposed to be done to download it. I have the 2.2.1 Software version, when I click on "Check For Update" ( On Itunes ) It appears I aparently have the lastest so