Pressing/hitting "enter" starts the application?

Right now, when I open Finder -> Applications -> press enter (on whatever selection), I get a "rename" function (whereby the App name is selected and I can rename it).
I would like to be able to launch the app by pressing enter on the app (so, instead of being able to edit the name, I want it to launch).
Is this possible?

donharris wrote:
Right now, when I open Finder -> Applications -> press enter (on whatever selection), I get a "rename" function (whereby the App name is selected and I can rename it).
I would like to be able to launch the app by pressing enter on the app (so, instead of being able to edit the name, I want it to launch).
Is this possible?
no. but if the goal is to simulate double-click using only keyboard this should be possible using Mouse Keys (system preferences->universal access->mouse).

Similar Messages

  • Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

    Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
    Picture below, many thanks for your help.
    Jason

    Back up all data before proceeding.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • ABAP Trial version u2013 starting the application server

    Hi,
    I have a problem starting the application server via the management console. After choosing action ->start I have to enter user and password. Do I have to create a new user password combination, use the OS password or try bcuser and minisap? None of these three options worked out. I always get the message 'Start failed: 2 Invalid Credentials'. Or went there something wrong during the installation?
    Thanks for your help.
    Birgit

    Hey Birgit,
    In my case I installed ABAP Trial version (also known as MiniSap) on my local machine (Windows).
    When I turn on the machine, my Windows(OS) requires a User/Password (It was configured this way but it is possible you configure to not require a User/Password, it uses a default).
    When I instaled the ABAP Trial version, I logged on with a User/Password with administrator rights (it is necessary for installation).
    When, in the "Management Console", I start the ABAP (the "NSP" node), it asks me the user and password and I use the OS User/Password that I used to install ABAP Trial (above).
    If you are doing the same I don't know why the message "Start failed: 2 Invalid Credentials".
    Merry Christmas,
    Edited by: Walmir Catunda on Dec 15, 2008 11:34 AM

  • Error while trying to start the application

    Hi,
    Could any one please suggest the cause for this error. This error occured when I tried to start the application installed on Websphere server.
    --------Reading configuration for server: server1
    ADMU0111E: Program exiting with error:
    com.ibm.ws.process.exception.ProcessOpException:
    com.ibm.ws.process.exception.ProcessOpException: Error creating new
    process.
    Thanks in advance.

    Hi,
    Could any one please suggest the cause for this error. This error occured when I tried to start the application installed on Websphere server.
    --------Reading configuration for server: server1
    ADMU0111E: Program exiting with error:
    com.ibm.ws.process.exception.ProcessOpException:
    com.ibm.ws.process.exception.ProcessOpException: Error creating new
    process.
    Thanks in advance.

  • Error starting the Application Server and Deployment Tool

    After installing the iPlanet Aplication Server with sp3 I get the following
    errors starting the Application Server and Deployment Tool.
    iAS Application Server
    ================
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    error: could not get context
    *** Errors in initialization from registry ***
    Errors in initialization, exiting ...
    iAS Deployment Tool
    ===============
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    Exception in thread "main" java.lang.NullPointerException
    at com.kivasoft.util.Util.loadComponent(Unknown Source)
    at
    com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
    at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
    Source)
    Can anyone help me please!

    Hi,
    Would be more helpful if you can mention, the O/S. Also, pls mention where
    you are getting this error, at kjs or kxs, or, are you able to start the server
    and at which specific instance do you encounter this.
    Regards
    Raj
    "Antonio Casqueiro" wrote:
    After installing the iPlanet Aplication Server with sp3 I get the following
    errors starting the Application Server and Deployment Tool.
    iAS Application Server
    ================
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    error: could not get context
    *** Errors in initialization from registry ***
    Errors in initialization, exiting ...
    iAS Deployment Tool
    ===============
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    Exception in thread "main" java.lang.NullPointerException
    at com.kivasoft.util.Util.loadComponent(Unknown Source)
    at
    com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
    at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
    Source)
    Can anyone help me please!

  • Error starting the Application Server and Deployment Tool in Windows 2000

    After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
    get the following
    errors starting the Application Server and Deployment Tool.
    iAS Application Server
    ================
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    error: could not get context
    *** Errors in initialization from registry ***
    Errors in initialization, exiting ...
    iAS Deployment Tool
    ===============
    GXBindInit: GXBindBasic failed
    GXContextInit: GXBindInit failed 2
    [26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
    ContextModule.createContextInit failed:
    Exception in thread "main" java.lang.NullPointerException
    at com.kivasoft.util.Util.loadComponent(Unknown Source)
    at
    com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
    at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
    Source)
    Can anyone help me please!

    Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?

  • Server0 is taking more than one hr to start the applications

    we are in the meddile of tht sp19 uppgrade for portal server.
    when SDM is restarting the J2ee process, all of the them are not coming up
    and server0 process is taking lots of lots of time to start the applications.
    pls cud any one let me know wht to do
    Thank you
    Mallesh.

    It isn't, something has gone awry. Hold the power button for about 10 seconds to perform a forced shutdown. Then restart as normal. When you turn to the System Preferences, Users and Groups tab you will probably find that the account was deleted. But it may not be. If you chose the option to delete the user's folder, make sure that it is indeed deleted. It will probably be a good idea to start in recovery mode - restart holding the command R key - and use Disk Utility to repair the hard drive, just in case.

  • Starting the application server

    Hi,
    I am new to Java Studio Enterprise 8. I try this tutorial
    http://developers.sun.com/prodtech/javatools/jsenterprise/learning/tutorials/jse7/introjse7/index.html#Step_2:_Make_sure_Sun_Java_System_App
    which is for Java Studio Enterprise 7.
    I stop the firewall before anything :
    [X@Y Zip]$ sudo service iptables status
    Firewall is stopped.
    I start Java Studio Enterprise 8 IDE under Linux ([installdir]/jstudio_ent81/ide/bin/jstudio.sh). I clicked on runtime, I have two bullets, Bundled Java Tomcat (5.5.9) and Sun Java System Application Server. Unfortunately, unlike the picture provided on the tutorial I don't have an application server automatically started.
    I tried to start the tomcat server, this worked fine, I can use my browser to log on the tomcat server, http://localhost:8084. I switched it off.
    I tried starting the application server similarly but I get the following message after 5 minutes :
    "Error : The Sun Java System Application server could not start. More information about the cause is in the server log file. Possible reasons include:
    - Unknown master password (etc...)
    -Port conflicts (etc...)
    -Incorrect server information (etc...)
    -Corrupted Deployed Applications preventing the server to start (This can be seen in the server log file. etc... )"
    I don't think I've got anything running on those ports.
    [X@Y Zip]$ netstat -an|grep 8080
    [X@Y Zip]$ netstat -an|grep 8181
    [X@Y Zip]$ netstat -an|grep 4848
    [X@Y Zip]$ netstat -an|grep 7676
    [X@Y Zip]$ netstat -an|grep 3820
    [X@Y Zip]$ netstat -an|grep 3700
    [X@Y Zip]$ netstat -an|grep 5222
    In the server log file, I can't see much which would help [it seems to be long java command lines, but no particular message related to an error or a warning...]
    Thanks for your help,

    I reset the master password, but it did not change anything.
    I reinstalled everything, tried again, and still nothing on this side.
    There isn't anything in the log [when I click on "View server log" I get a "no such file or directory" dialog box...].
    When I click on start, I immediately get the following message on the shell :
    "Internal HTTP server running on port 8082" and I can use my web browser to go on "http://localhost:8082/"...

  • Android Emulator get hangs on starting the application in debug Mode

    I have deployed the application on Android Emulator in debug mode but on starting the app it get hangs. I have set the Java Debugging to true in the cvm.properties file and also started Java debugger from JDev before launching the ADF Mobile app on android emulator. Can any body help me to figure out the problem why the emulator gets hang on starting the application in debug Mode.

    Hi, after setting the debugging = true, you would also need to start the JDeveloper debugger and configure it for remote debugging. Shay has a blog article that should help.
    The emulator is hung while trying to connect to the JDeveloper debugger.
    https://blogs.oracle.com/shay/entry/debugging_adf_mobile_apps_on
    Thanks,
    Joe Huang

  • Adobe Template Error after starting the application

    Hi all,
    I just developed a WebDynpro Application in which a Adobe Form is used in one view.
    After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
    Unfortunately I am getting, the following error message:
    <b>com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)</b>
    Does anybody know how to solve this problem?
    Thank you in advance.
    Best regards, Patrick.

    Hi Patrick,
                     Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
    regards
    Sumit

  • Finding out which jarfile that is starting the application

    Ok the thing is, i need the JarFile which started the application.
    With javaws, it seems like they change the name of the jar file when you deploy it with jws, so how can i in the main() method of the Main class get the instance of the JarFile which it is started from?

    Hi,
    May i know which app you are talking about.
    If you are talking about IPC then, you can generate the trace of the Product Configuration web page and in the source code you get, you can see which scenario was chosen.
    If you are talking of ISA, then you can either see this in the URL that launches the app or in the XCM setting page, which scenario has been set to the default one.
    Let me know in case you need more info.
    Regards,
    Kunal

  • Error Message concerning template after starting the application

    Hi all,
    I just developed a WebDynpro Application in which a Adobe Form is used in one view.
    After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
    Unfortunately I am getting, the following error message:
    <b>com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)</b>
    Does anybody know how to solve this problem?
    Thank you in advance.
    Best regards, Patrick.

    Hi Patrick,
                     Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
    regards
    Sumit

  • After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and

    After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and a new download, but the problem's always there

    Try this: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Acrobat 8 Professional crashes 10 seconds after you start the application xp

    Acrobat 8 Professional crashes 10 seconds after you start the application. I have adobe acrobat 8.1 running on a dell vostro 1400 vista.

    Are you sure it's crashed and not 'temporarily-frozen'?
    I'm having this issue with Acrobat 9, in which it launches and runs long enough to page down two times and then stops responding for about 30 seconds.

  • CS5.5 Debug / Windows 7: A lot of assertions after start the application

    Hi
    I have installed Indesign CS5.5 DEBUG on a Windows 7 Professional PC. But I have a lot of assertions if I start the application. On this PC, there are more versions of Indesign installed (CS3, CS4, CS5, debug and release).
    I have assertions like (3 examples):
    - GetGlyphIDs - ColdType didn't give us any glyphs. Marking fond as bad. PSName - MinionProRegular
    - FontManager::QueryFont - default font has problems
    - invalid container
    - What could be the problem?
    - Does anybody have the same experience?
    - Problems with a font?
    If I create a new text box and want to write text in it, Indesign crashs. Hm?
    Thanks
    Hans

    Hi
    I removed (deinstalled) InDesign CS5.5 and InCopy 5.5 and installed InCopy CS5 again. Now, Indesign CS5 and InCopy CS5 work both. 
    I will try it again (install CS5.5) versions and will inform you about my experiences. 
    Thanks 
    Hans

Maybe you are looking for