Pressing the "low latency" button isn't bypassing FX on Master channel...?

Hey Everyone,
I love the "low latency" button on the transport bar, it's great when you have a channel full of complex effects, and you press the button and Logic chooses to ditch one or two effects (and turns them orange in that channel so you know which ones!) so you can have low-latency feedback while you record.
But the other night I was doing some recording on a channel with a few effects. However, on the Master channel, I had about six or seven effects.
There was a considerably lag when recording and using software monitoring. I thought pressing the "low latency" button would do its usual magic. It didn't!
So my question is... does this feature only drop out effects on the channel that you're using, and not the Master channel (even if the Master effects are going to cause a significant lag?)
Cheers,
Mike

Hi Mike,
Low latency does not work on master... now...
in the previous Logic 8 versions 8.0.1 it was working...
I really don't know if is a Leopard behavior
anyway
Same here... it does not works on Master plugins

Similar Messages

  • When I press 'Low Latency' button I only have audio coming through left channel ?!

    When I press 'Low Latency' button I only have audio coming through left channel  !?
    When you take it off 'Low Latency' mode the audio is fine and comes out Right and Left speaker.
    Can anyone please advise why this happening and how I can fix it ?

    I think Pancenter is trying to get you to read and understand the "Working in Low Latency" section of the manual as the results or problems with working in Low Latency mode are variable.
    This section, for instance:
    Note: The sound may change in Low Latency mode. Depending on the plug-ins in use, the changes can be anything from subtle to dramatic. If plug-ins being used do not exceed the total latency limit, there will be no audible difference.
    If it was me posting about this issue I would now come back with what exactly is inserted/bussed on the tracks because it could be an accumulative problem based on what plug-ins you have active and if they are on audio tracks (stereo or mono), instrument tracks etc. Lots of variables. The section of the manual quoted above won't give specific instances as any user could be using any combination of any amount of plug-ins.
    So more information is needed before anyone can help you any further.

  • TS3274 my ipad isn't responding if i press the on/off button to turn it off so i could reset it

    How do I turn off my ipad when it isn't responding when I press the on/off button to turn it off so I could reset it?

    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • Low Latency button

    In Logic 8 there is a Low latency button, that bypasses all the plugins that cause latency.
    Why then, when there are No plugins - there is still a huge latency?
    Any ideas?
    (In Logic 7 with the same settings and the same plugins there is no latency.)

    Hi,
    what computer model - what buffer settings - which OS - shoesize - hobbies? We need more info to help you with that one...

  • My iphone 4 will not switch on and i have Press the sleep/wake button

    My iphone 4 will not switch on and i have Press the sleep/wake button for more than 20secs. i have also connected the iphone to Itunes but the computer or itunes doesnt recongise the phone is connected. HELP

    If it isn't responding to any of those steps it might prove difficult to extract data from the phone.
    So again your best bet may be the Apple Store, they would be able to help retrieve it I expect.

  • HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update.  I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen.  When I press the on off button nothing happens.

    I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should.  I left and came back in about 4 hours and have a black screen.  When I press the on off button nothing happens.  Help.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4623 What if the "software update" button isn't there?

    Does anyone know what to do if the "Software Update" button isn't there? I probably sound really lame, but I want to update to the iOS 5.0 for the iPad 1.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I am trying to take a picture of a web page and paste on a one drive powerpoint. I tryed pressing the print screen button, and pasting. But it is giving me message saying that my browser can not fine the clipboard, and I need to use the keyboard shortcuts

    I need to take a picture of a web page, insert it onto a powerpoint online, and crop the picture. I am pressing the print screen button, and right cliking paste. But I am getting the warning message saying that my browser can not use the clipboard, and I am unsure of how to take a picture, then paste it, and crop it all on to a power point.

    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Hello all,     I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

    Hello all,
    I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
    What I have tried so far to no avail:
    Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
    Tried this: iPod nano (6th generation): Hardware troubleshooting
    Changed the watch face to display.
    Recharged the device overnight (without full discharge).
    Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
    Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
    Regards,

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • Why does the sound stop after about 10 minutes? I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings.

    I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!

    Rosapeas wrote:
    I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!
    I can imagine that is frustrating as heck.  My daughter has one of these and I know for a fact hers does not turn off after 10 minutes because I have to turn it off for her every night after she has fallen asleep.  Below is what Apple has to say about it from a troubleshooting standpoint.
    "If music stops when the iPod nano screen turns off m Make sure the earphone port is free of debris. m Make sure the earphone or headphone connector is pushed in all the way. To see an illustration, go to support.apple.com/kb/ts3700."
    Are you using aftermarket ear buds or speakers when you listen to these lectures???  If so maybe it has something to due with a compatibility issue.

  • Closing Out of Pop Up Windows without Pressing the Red X button

    Hey, this is my first Mac ever. I am not much of a computer carer. However, I don't want to wreck this computer. I understand with PC's you can get viruses or malware "whatever it is" from closing out of the pop up windows by just pressing the close "X" button in the upper right hand corner similar to the red "x" button on the macs. Now I know there was a way to close out of the window by just pressing Alt+ F4 and it would safely close the window. Is there any way to safely do that with pop up windows for macs?

    Welcome to Apple Discussions!
    Command-W closes individual windows that are currently frontmost.
    Command-Option-W closes all windows of the frontmost application.
    For more keyboard shortcuts, see this page:
    http://support.apple.com/kb/HT1343

  • My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    Must be serious because you have stated the problem 4 times now.
    Here are a number of things that you can try and maybe one of them will help.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
    And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

  • Since Apple's last Update on 6 June 2014, I have been unable to Import photos from any source. I receive a message saying, Importing photos but nothing happens. When I click on Stop Import, nothing happens. I must press the On/Off button to exit iPhoto.

    Since Apples last update on 6 June 2014, I have been unable to Import photos from ANY source. When I attempt to do so, I receive the message "Import  Preparing to inmport..." I've waited 10 minutes but nothing happens. When I click on the icon, Stop Import, nothing happens. When I attempt to Close iPhoto i receive the message, "Photos are being imported to the photo library. Please wait for import to complete." When I click on OK, nothing happens. The only way I can exit iPhoto is to press the On/Off button.

    After loading this file I was sucessful in importing photos from a web site, my camera memory card and a CD containing photos.
    That is a good news.  We now know, that iPhoto is working as expected, when you are switching to a different library.
    But this is puzzling:
    I then see a box with two Librarys listed, both have the same name except for the following and are listed as:
    iPhoto Library.photolibrary but one has (default) after its name which is the one which is always displayed when I load iPhoto.
    Underneath the box is written:
    /Users/paulfkardian/Pictures/iPhoto Library.photolibrary
    Underneath this are three boxes titled: Other Library    Create New    Choose
    I highlighted the the File without the (default) after its name and clicked on Choose. A Library was loaded which had my photos (about 9,822) from about 7 months ago. Underneath the box is written diferently than the file always loaded and says:
    /Users/paulfkardian/Pictures (original)/iPhoto Library.photolibrary
    You are having two "Pictures" folders in your Home folder, Pictures and Pictures (original)? And each has a different iPhoto library - one working correctly, and one not?  Do you remember, when this second "Pictures" folder has been created and what caused it?  Did you restore your Home folder from a backup some time ago?

  • Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.

    Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/TS1502

  • My iPad Air stalled during an update and I cannot restart my device even after pressing the on/off button for 15 seconds. Any suggestions?

    My iPad Air stalled during an update and will not restart even after pressing the on/off button for 15 seconds. Any suggestions?

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear and it should reboot.

Maybe you are looking for