Pressing the On/Off, Sleep/Wake button
I would like to know when pressing the On/Off, Sleep/Wake button, is it normal to hear something like radio noise thru the earphones? I mean the kind of noise you hear like when you are adjusting the earphones plug, turning it left and right against the 3.5mm jack.
Thank you.
mbp233 wrote:
I just found out that's supposed to be the lock sound and can be turned off in the settings. I just want to know if the lock sound really sounds so much like radio noise. It seems to me that is not a nice choice of sound...
Mine (the original 1st gen. iPod Touch) makes a kind of a clicking sound. It's very short, and not very much like radio static. Without being able to hear yours, though, it's hard to say if it's normal or not.
charlie
Similar Messages
-
my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!
plug into itunes and take it from there
http://support.apple.com/kb/HT1808 -
I was prepare to update the latest facebook app, but on the half way suddenly stuck... i can't press any button! i can only press the swtich off and menu button together for restart my phone, and of course turn into full black screen and the apple comes back again to the screen and for a really long time. I did try to sync to my laptop but it can't work, the apple stay there forever. Can someone help me?
OR RECOVERY MODE
Recovery Mode
1. turn off the iPhone.
2. connect the USB cable to the iphone.
3. press the home button (the large round), and press and hold connect the other end of the USB cable to your PC.
4. continue to hold pemuto the home button.
5. within about 8/10 seconds will appear on the screen of the phone USB cable + iTunes.
6. your iphone is now in recovery mode.
7. will open automatically iTunes you will detect an iPhone in recovery mode.
To return to normal mode you just hold the home button + shut down: the Apple logo in about 1 minute and the iphone will reboot. -
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
Where do I find the 'home' and 'sleep/wake' buttons on my iPad?
One user suggested I reboot my iPad by holding down the HOME and SLEEP/WAKE buttons at the same time. Where do I fine the home and sleep/wake buttons? I am new to apple. Thank you.
The home button is the button on the front of the iPad below the screen, the sleep/wake button is on the top edge of the iPad
-
My ipod touch wont turn on. Nothing happens when i hold on/off sleep wake button neither will it show up in itunes. Any ideas or is it doomed
See Here for
iOS: Not responding or does not turn on -
i want to know if there is a way i can fix it on my own without going to a store.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
I was looking through my pictures and when i tapped to see a specific one my ipod blacked out. Now the screen only shows the apple icon and I cant go anywhere. I tried preshing the on/off and home button but it won't work. I even pressed both at the same time for 10 seconds and still nothing... I connected it to my lap top and went to my itunes account but it tells me that the device that i just plugged in has an error. I already tried plugging it back in several times and it still won't work. I don't know what else to do. I havn't had it for a whole year yet so its still insured to the apple company right? at least thats what I heard
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Our i{POD touch is frozen, and displays a white screen. I can't turn it off, and it is unresponsive when trying the on/off, sleep/wake buttons.
Let the battery fully drain. After charging for at least an hour try:
V
If not successful time for an appointment at the Genius Bar of an Apple store. -
Anyone having issues using the sleep/wake/power button? I have tried to power totally off by holding down the button but to no avail. It has no problem going to sleep but can not power down.
Hi,
You may have an app running you aren't aware of. Try force quitting the app.
Press and hold the On/Off Sleep/Wake button for a few seconds until a red slider appears, then press and hold the Home button until the app quits.
If it's not an app, try restoring your iPad, help here.
Carolyn -
Iphone 5 doesnt boot up on charging, the sleep wake button doesnt work either
I have an iphone 5 which usually boots up when charged from zero power, but now it just is not booting up.
I can just see a white screen with black apple logo on my phone.
Also the phone's sleep/wake button does not work.
the apple geniuses cannot quite figure out the problem, so it is like I have a very expensive piece of stone.If plugging iPhone onto the wall charger do not turn it ON, make an appointment with the Apple genius bar for an evaluation.
-
Home and sleep/wake button doesn't work
my ipod touch 5th gen's home button doesn't work and I've tried the accesive but it still wont lead to the home screen... even the off/sleep/wake button doesnt work... I've just had this gadget last May 2 of this year... What will I do?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also are you saying the the Accessibility feature Assistive Touch does not work? -
My ipad mini is frozen in an app and the home button is stuck. Pressing the wake/sleep button does not bring up the red slider to turn the ipad off. Is there any other way I can reset the ipad? Can I remove the battery? and then put it back in?
barbarafromnl wrote:
Can I remove the battery?
No the battery is non removable.
Try a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar
Maybe you are looking for
-
Win7 can't install boot camp 3.1 update.. says it's needs 3.0 first
i just (successfully) installed WIn 7 on my mac pro.. i formatted the partition with boot camp assistant 3.0.1 on the Mac and then proceeded with the guided instructions and got WIn 7 installed. i've read that this Boot Camp 3.1 updater is highly rec
-
Out of the blue Photoshop will not open on my iMac. Instead a message to purchase iCloud version of Creative Suite and never lets me open Photoshop afterward. It prevents me from using my "Big Mac" for creative work and production. I own and use CS6.
-
Forms 6i prints ugly when using the Forms print command from the menu
When we use the Oracle Forms print built-in to print the screen-shots, the print-out turns out to be ugly with lots of dots all over. We are using Forms 6i (6.0.8.11.3) running on 9iAS on Windows 2000. The version of JInitiator we are using is 1.1.7.
-
I have nine pages under development each based on the .twoColElsLtHdr CSS Layout (two column elastic header and footer. Each page includes a top banner graphic in the header, nav menu consisting of flash buttons in the left column, a page title graph
-
What version of JDeveloper is certified for Windows 2008
What version of JDeveloper is certified for Windows 2008