Pressing the Web Icon in Applications resets my TX

I've been successfully accessing Wi-Fi for a couple of days, and now, when I press the Web icon to get to mail bookmarks, the unit goes black and resets itself.  Prior to the first time this happened, I had been opening e-mail and forwarding some of them to other addresses.  I am assuming that I will have to do a hard reset and reload everything (when I get home - I am currently on vacation - which is the reason for the heavy mail viewing) - but, hopefully, someone has a remedy.  Thanks
Post relates to: Palm TX

Hi, 2 questions:
1) When you checked your emails and were forwarding those emails were you doing this by going to your email website or doing this through VersaMail or some other email application ?
2) Are you getting resets at any other times and with any other applications, not just when you launch an app ?
When you try to launch any application and your Palm resets it generally means either:
• The application is not compatible with your Palm. Obviously, Blazer (Web) is compatible
or
• Your Prefs database is corrupt
or
• On NVFS Palms only (like the TX) the dbCache is too full and needs to be cleared
Do you use a backup to card application like NVBackup @
http://sourceforge.net/project/showfiles.php?group_id=92189&package_id=186018 (you only need binaries.zip)
If yes then hopefully you have a backup that was made when Blazer (Web) was working ok, try a 'Restore' of that backup. This will restore a Prefs database that is not corrupt.
It is always best to do a Soft Reset before using Blazer especially when you are going to be doing a lot of work because on NVFS Palms (like the TX) the dbCache fills up and needs to be cleared.
But then, I guess you have already tried pressing the Web icon again after your TX reset itself so that has already been tried
You could also try a Blazer Spring Clean using a FileManager like FileZ @
http://www.nosleep.net/index.php?option=com_content&view=article&id=47&Itemid=27
If you can eventually launch Blazer change your Start With: setting to Blank Page.
You can find the info on how to do both these things in the thread Blazer Tips and Tricks @
http://forum.brighthand.com/showthread.php?t=252620
in particular the sections
Blazer SpringClean- Normal & FileManager:
Blazer @ Hotels, Airports, Free WiFi HotSpots etc:
Good luck
All the best, woz of oz
Message Edited by wozofoz on 04-13-2009 03:01 PM

Similar Messages

  • TS2621 I have a gray screen on my ipad 1 when I press the mail icon. Can anyone help?

    I have a gray screen on my ipad 1 when I press the mail icon. This situation just started this morning. Can anyone help?

    Try closing the Mail app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why does my screen come up dark when I press the camera icon?

    Why does my screen come up dark when I press the Camera icon?  I can neither take pictures nor look at the photos I have saved.

    Doulbe tab the home key to see the task bar.  Touch and hold any of those icons until they jiggle, then delete them by touching the minus sign.   Then reboot the pad by holding the sleep and home buttons until the apple logo appears.  Ignore the red slider.
    You either have another app open that is using the camera, or you just have too much stuff in memory.  The reset process should clear it up.

  • TS3899 I am unable to access my mail account. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

    I am unable to access my mail account on my iphone, which I have been able to do previously. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

    Close the mail app, double tap the home button and completely close out of the app.
    then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • TS1368 I'm trying to help my sister in law with Itunes and you tube on her ipod touch.  When I press the itunes icon on the menu it says "cannot connect to the ipod store".   I've updated the latest software.  Any suggestions?

    I'm trying to help my sister in law get Itunes on her ipod touch.  When I press the itunes icon on the home page it says "cannot connect to the ipod store".  Similarly when I press the You Tube icon is says "Cannot connect to You Tube".  I'm able to access the web through safari.  Any ideas out there?  Thanks.

    Can't connect to the iTunes Store
    Try powering off and then back on the router

  • Blank screen after pressing the phone icon

    Hello everybody
    When I press the phone icon in my iphone 5C I get a blank screen for 10 secondes and then the window closed to come back to the home page of the iphone. As a result I did not get access to the phone keyboard neither to the contact list nor the message box. I did a reset of the setting of my iphone but the problem remained. I pressed both the sleep / wake buton together with the home one but it did not work. I switch it off without better result. Anyone get any idea?
    Thank you
    Denis

    Back up your data and restore your software via iTunes or iCloud. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file or maybe it's one of your apps causing problems. If it continues, take it to an Apple Store for evaluation of a possible hardware problem.

  • So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

    So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

    Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Dear apple management,  I have purchased I pad mini e few days ago. I need help as follows:  (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

    Dear apple management, apple support communities
    I have purchased I pad mini e few days ago. I need help as follows:
    (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
    (2) How do i sync my pc  with I pad mini?
    (3)i can read on i pad mini  file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
    Dr Uma S Nayak
    <Personal Information Edited by Host>

    You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
    For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
    You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
    Syncing music : http://support.apple.com/kb/HT1351
    Syncing apps : http://support.apple.com/kb/PH12315
    If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
    For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

  • My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.

    My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.

    A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.

  • My iphone has a problen on the phone icon. When I press the phone icon, it will auto dial the last number, how can I fix this?

    my iphone has a problen on the phone icon. When I press the phone icon, it will auto dial the last number, how can I fix this?

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Even though my email accounts seem to be set up when i press the email icon it just lists icloud, EOL etc and asks for new account to be set up

    Even though my email accounts seem to be set up when i press the email icon it comes up with Icloud, EOL etc like it is not set up.  When you press on icloud and put in details it says the account is already set up.
    Email had been set up and receiving and sending email but seems that no longer working.  Have i bumped something and how do i fix it.

    This is for Ipad rather iphone that am having this problem

  • When i want to return to my home page I click on the home icon and it resets the page to my home page but also open a blak tab which i don't want how can I stop this as i have too many tabs open.

    When I want to return to my home page after looking at a website I click on the home icon and it resets the page to my home page but also open a blak tab which i don't want.How can I stop this as I have too many tabs open and have to close all of them.

    You may have an unwanted extension that is modifying sites (or the toolbar area). Try this:
    Disable ALL nonessential or unrecognized extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Does that flush the tab?
    Please report back on anything suspicious you find so others can learn about its bad behavior.

  • Why do three new tabs open every time I press the "home" icon?

    Three new tabs open every time I press the home icon. I and two others have looked through all my settings and have contacted Mozilla (no response) and can't figure out why this is happening? Anyone have a clue how to stop this incredibly annoying problem from continuing?
    == This happened ==
    Every time Firefox opened
    == Upon install of Windows 7

    See [[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols.
    See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Help; I cannot access my browser with all my bookmarks. When I press the firefox icon all that happens is that I go straight to yahoo. My e-mail is asampoh@yahoo.co.uk. Thanks for your help.

    When I press the firefox icon on my lap top I go straight to yahoo. There is no firefox browser and all my bookmarks have disappeared. What can I do to get the browser back.
    Thanks for your help.
    Adrian Asampoh

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    See:
    * http://kb.mozillazine.org/Session_Restore
    See also:
    * http://kb.mozillazine.org/Firefox_crashes
    * [[Firefox crashes]]

  • JCAPS UDDI - Problem Using the Web Service Management Application

    Hi everyone, this is my problem:
    1.) I installed the JCAPS UDDI Server in a Solaris. <-- Ok
    2.) In the eManager I installed the Web Services Access Manager. <-- Ok
    3.) I started the UDDI server. <-- Ok
    4.) I check that the process is running (in Solaris). <-- Ok
    5.) I'm trying to load the Web Service Management Application Login Page, but it doesn't show the page so I can't login and in consequence I can't publish, remove, view, and search WSDLs by using the Web Service Management Application.
    I appreciate some help about this.
    Regards

    Yes, I am connecting to the same system where we have data..
    Anirban

Maybe you are looking for