Pressure sensitivity uneven on different areas of the screen

Just upgraded my x230t to win8. After much trial and error I finally got the pen to have very little pressure sensitivity by increasing the hardness of the pen tip to full in the pen settings (control panel). But I am not sure if this is pressure sensitivity. The problem now is that I get thin light lines in the middle of the screen but hard dark lines after the middle region of the screen when drawing with the same pressure. And its the same regions even if i move the canvas. I have attatched a screen shot too. Could it be my screen or my digitizer? I am confused...... please help.
The lines on the attached pic is drawn with equal pressure.
Solved!
Go to Solution.

The conditions of the experiment are not evidence. It is impossible to draw freehand lines with equal pressure on the entire surface of the canvas. You may have to retry using a ruler, in tablet mode, the side of your hand (don’t forget to put on a thin glove) sliding onto the screen.
Example with my X220t in ArtRage Studio. I used the ruler stencil. (Highly compressed jpeg image):
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

Similar Messages

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Cannot click on certain area of the screen

I'm not sure if this is a display or a mouse issue. I have had my 24" iMac since June and have just started having this issue. I cannot click (left or right mouse button) on one specific part of the screen. I can click on links and buttons, form boxes, bring up the contextual menu (right click) or do pretty much anything you do with the mouse on most of the screen. However in this approximately half inch high and a few inches long area just above the middle of the screen on the left hand side there is no response from computer when clicking with the mouse. I can click on a link in the browser above this space and below it but not on the link in it. If I move the browser window so that same link appears in a different part of the screen I can click on it fine and cannot click on the link now in the affected area.
This is the same for any clickable item placed in this area of the screen. Is this a display or a mouse issue?

If you have an external drive that can be erased, you could try installing a new system there and setting the Mac to boot from it. That will determine if it is related to the current system installation, or if it is more likely to be a hardware problem. You can obviously also back up your data, erase your internal drive, and reinstall a new system there.
Alternately, as a test, you can just startup from your Mac OS X installation disc. At the first installer screen, go up to the menu bar. Under Utilities, run Disk Utility. Move the Disk Utility window around the screen as needed to see of the same problem exists while booted from a different system. If it happens there, then it is more likely to be some odd hardware-related issue. If it does not, it is possible a fresh system installation will resolve the problem.

Can a single applet write to several areas of the screen?

If you stick several copies of some graphic into a webpage, hopefully the browser will be smart enough only to request one copy. A related thing that would be desirable would be to have a single applet that could paint into different areas of the display (even if multiple instances of the applet ultimately are created).
Does anybody know offhand if that's possible, and how to do it?

Hi Thomas:
If you stick several copies of some graphic into a webpage, hopefully the browser will be smart
enough only to request one copy. If you examined your temporary internet files folder (assuming that you're using IE), you should only find one cached copy of the graphic file.
related thing that would be desirable would be to have a single applet that could paint into different
areas of the displayAltho I have never tried this myself, I am sure that if you create several <DIV> or <LAYER> tags, you can target the applet's display to screen location occupied by these tags with the use of JAVA<-->JAVASCRIPT communication via the JSObject (JavaScript Object).
;o)
V.V.

All of a sudded, my firefox browser isnt allowing my to click links and open pages, or open anything on the top area of the screen.

All of a sudded, my firefox browser isnt allowing my to click links and open pages, or open anything on the top area of the screen. For example i go to my email and i cant click on inbox, send, create, folders, mark as unread. It is like this on every website?? Its really annoying i cant do anything becasue most sites have login at the top of the screen and i cant login to anything.

That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can keep an eye on this thread:
*[[/forums/contributors/707748]]

Overlaying area in the screen

Hi,
I'd like to do following:
In a rectangular area in the screen, I'd have two displays, one is a NSCustomView, another is NSTableView, the two will be on top of the other, only one is seen at given time, any hints on how to do this? Thanks.

using tabless NSTabView seems working

How can I show viewers of my projected iPad screen where my fingers are touching the screen?

So Keynote shows a cool "laser pointer" when you hold your finger against the screen in presentaiton mode....
I'd like to use a similar "laser pointer" effect to show where my fingers are touching the screen in any application -- and, yes, where there are simultaneous multiple finger contacts.
This would be so helpful in demo-ing the "new" iPad to a group of 30+ professors this coming August. Hold an iPhone over the screen as a camera just doesn't "cut it."
- Brian

You can add extra empty toolbars if you want to see more of the persona.
You can create extra toolbars to get extra space via "View > Toolbars > Customize" or "Firefox > Options > Toolbar Layout"
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.

Wired Mighty Mouse isn't clicking some areas of the screen

I'm having some trouble with my Mighty Mouse since yesterday. The system started not responding to some clicks in most areas of the screen, such as the top menu, window titles, finder windows, desktop. The weird thing is that clicking in Dock icons works fine, as well as clicking inside a web page in Safari.
I've rebooted several times, ran the Snow Leopard 10.6.2 update, but none of these helped. :/
Do you guys know how to get around this? Next Monday I'll test this Mighty Mouse with my Mac Pro at work, I hope it's not a problem of the mouse itself, but a system problem.

I had exactly the same problem after giving my ball a super long scrub to clean it. Only the secondary click sometimes worked. Checked to cable iside, but no luck.
Then went to System Preferences as I figured the middle button was working a bit and set all buttons to Primary by selecting them with the Tab key, scrolling to my option with the up and down arrows, and confirming by pressing the Space key.
Now my mouse works as a simple one-button device, but that it OK for me. Must have damaged its brain with my ball cleaning. See how you go.

In IMovie 11 the viewable area of the screen shrinks when placed in project editing. How do I keep this from happening?

In IMovie 11the viewable area of the screen shrinks when placed in the project editing area. How do I keep this from happening? Thanks

Mine doesn't show anything in the CSS Designer panel when I make a selection in Code Vew. It will only pop up the css set for a given element if I select that element in Design View first. If I drill down using the Sources and Selectors sub windows in the CSS Designer panel itself, it works the same in both. I pretty much never use it, but it doesn't do what you're explaining in my version of DWCC, so I'd guess you may have some slight corruption in the program.
Unless, does it make a difference if you have Live View turned on or not?
You could try clearing the program cache/personal config folder: Deleting a corrupted cache file
Or restoring preferences if the cache doesn't do the trick: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html

Non clickable area on the screen.

I have a mid 2007 20" iMac that untill now didn't give me any problems. But yesterday I I notice a wierd bug. It's basically a small area of the screen where if I click nothing happens. Here is a video with the bug. http://droplr.com/xK8v Any suggestions?

Hi
Well, your problem description sounds strange but of course, it could be a screen problem.
How about warranty?? Is it valid?
The warranty covers only the hardware problems and malfunctions.
For me it does not sound like a software issue and therefore the warranty should cover the notebook check, reparation or display replacement.
I read about a strange color problems on a Satellite A100 series. Some pixels were light and some pixels were dark.
The BIOS update has solved this issue.
But you know, it does not mean that the Bios update will help you.

Selecting objects or ares of the screen, copy, and paste are missing

Hi,
Why such a standard and important functionality like selecting objects or areas of the screen, then copy and paste them are missing in the product?
A

Hi,
You can't select objects in Ideas, you can copy/paste the whole layer's contents by duplicating it, there is an icon in the layers panel, next to flip and merge down icons.
Emi

920 yellow/brown areas of the screen top and a pat...

Hi Everyone
I have a problem and have seen it elsewhere on the net, but my screen has a yellow/brown area in the centre of the screen visible against a white or light coloured back ground, it also has the same along the top left corner.
The phone is on 8.1 you can see the area on web sites like bing news or the BBC and when using the camera, so it is I think an issues with the screen itself.
Any ideas or should I take this otherwise super thing to the fixers
Solved!
Go to Solution.

Your best option is to have the device looked at by the nokia care facility as there is multiple reasons and scenarios to this issue each one different.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

My IPod will not sync with my computer. The word IPod appears in the bar at the top right area of the screen, then a message box appears stating that my IPod could not be found. Any suggestions?

My IPod will not sync with my computer..The work IPod appears in the upper right area of the Itune window, then a message box appears stating that 'download could not be copied to the IPod because it could not be found'. Any suggestions?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- try another cable
- Try another USB port
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Displaying linked pages in an area of the screen, using CSS?

Imagine that I have a column on the left of the page that has a list of links to other pages. When you click on any of those links, then to the right the linked page is shown.
I know how to do this with frames, but I'm trying to figure this one out using CSS.
Can anyone point me in the right direction?
Below is a code sample that if your save and then view in a browser will show you (hopefully) what I am trying to achieve.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Test site</title>
<style type="text/css">

div.header {
height:4em;
width:auto;
border:0;
padding:0;
text-align:center;
background-color:#6CF;
div.sidebar {
width: 15em;
float:left;
text-align: left;
border-bottom:0px;
padding-top: 1em;
padding-right: 1em;
padding-bottom: 1em;
padding-left: 0em;
    background-color:#390
div.footer {
width:auto;
border:0;
padding:0;
text-align:center;
background-color:#6CF
-->
</style>
</head>
<body>
<div class="header">
   header goes here
</div>
<div class="sidebar">

   Link to page 1<br />
   Link to page 2<br />
   Link to page 3<br />
   etc...<br />
</div>

This is the area where the pages linked to should be displayed.<br />
So, if you click on the "Link to page 1" link, to the left, the contents of page 1 will be shown here.<br />
If you click on the link to the left that says "Link to page 2" then the contents of page 2 will be shown here, etc.<br clear="left" />
<div class="footer">
footer goes here
</div>
</body>
</html>

Thank you Nancy! Your solution is (I believe) 99% of the way to being exactly what I want.
The code fragment below:
<div class="sidebar">

   <a href="../Test/About.html" target="Frame1"> About</a><p>
   <a href="../Test/FAQ.html" target="Frame1"> FAQ</a><p>
   <a href="../Test/Contact.html" target="Frame1"> Contact us</a><p>
</div>
<iframe name="Frame1" id="Frame1" src="../Test/About.html" height="auto" width="auto" allowtransparency="true" border="0" margin="0" scrolling="auto" > </iframe>
but I want the window that contains the 'imported' code to expand to be the same height as the sidebar and wide enough to stretch to the rightmost side of the visible screen.
I was guessing that
height="auto" width="auto"
would have done the trick, but it would seem not. Any ideas?

The windows are larger the screen - how do I adjust (sys pref display doesn't do it)

The windows are larger than the screen. I don't know why this happened.I can get to the top, bottom, or side by placing the mouse there.

What do you have displays set to. And what size is your screen.
Have you tried Safari menu > view > Zoom out?

Pressure sensitivity uneven on different areas of the screen

Similar Messages

Maybe you are looking for