Pressure & temperature monitoring with cRIO-9082

Hello. I need to quickly write a simple VI that acquires analog input data from a cRIO-9082 using NI-9205 and NI-9213 modules to acquire pressure and temperature measurements. I don't need to log data, only monitor the sensors. If anyone already has such a program and is willing to share, it would be greatly appreciated. Regards, Bill

On the main page of LabVIEW 2012 select create project, CompactRio (from the left pane) and select which sample you want to use (there are three, I would use the RIO Scan Interface initially). These are pre-built projects which have a lot of built in functionality, so they should do more than you need.
Craig H. | CLA | Systems Engineer | National Instruments

Similar Messages

Missing deployment plug-in cRIO 9082 and NI 9514

Dear all,
I'm trying to use deploy a C-module 9514, which is installed in a cRIO 9082.
I would like to get access to the interactive test panel, but whenever i try to do this it won't let me deploy the unit.
I get an error message as follows: "LabVIEW: (Hex 0x80DF001E) The deployment plug-in for this item cannot be found. Verify the proper software is installed. Deployment completed with errors", which leaves me unable to access the test panel.
I have LabView 2012 and NI RIO 3.3.0 installed. I also tried updating the firmware on the 9514 itself using LV without any changes.
To see the software installed on the cRIO, see the attached image.
Any idea of what i'm doing wrong?
Best Regards,
JZaulich
Solved!
Go to Solution.
Attachments:
Software NI Max cRIO 9082.PNG ‏31 KB

Hello Alex,
I reinstalled NI 12.0.1 onto my cRIO, however, i still cannot deploy the axis and gain access to the tuning panel.
I'm getting the same error message as previously (see attached pictures).
I have LabView 2012 32-bit on my PC and 12.0.1 on my cRIO.
Any idea of what the next step might be?
Best Regards,
Jakob Zaulich
Attachments:
Missing software.PNG ‏32 KB
cRIO Software.PNG ‏64 KB

Interfacing temperature sensor LM35 with Labview

I would like to know the best possible way by which I can interface a temperature sensor LM35 with Labview for monitoring the temperature of patients that can be incorporated into a patient monitoring device that includes monitoring of ecg, hrv, spo2 and cuffless bp (calculated using PPT, pulse transit time).

Sorry no Danny, thanks to Dennis_Knutson,
By some how you have cleared my confusion a little bit, now i will apply it practically and will ask queries if having any problem.
I appreciate to you quick response Dennis_Knutson

Methods to detect loss of connection with CRIO

I am developing an application with CRIO. The CRIO has an application in real time in which you are sharing a variable temperature. In my host PC I have an application that will receive this temperature and stored in a database. I need to detect the beginning of my program if present the CRIO and prompting a loss of connection and the system can not initialize.

This is the cRIO code. All it does is continuously update a variable that can be read by the HMI. It is important that this loop runs faster than the HMI loop to prevent false alarms.
The HMI code may look something like this. It is reading the variable being written to by the cRIO. If it does not change, the communication code is not running. You would probably want to do something if Comm's Lost goes true other than turn on an indicator.
There are many ways to do this and you may receive some better ideas from the forum.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How do I use two external monitors with my laptop?

I have a new Pavilion dm4-301 d cl Entertainment PC. My OS is Windows 7. I am used to using two external monitors with a docking station. This new laptop does not have a docking station. What do I need to get to use two external monitors?
This question was solved.
View Solution.

Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming. HP makes no true docking station for your laptop.

Using ADC Monitor with the new Mac Mini

My husband has an Apple monitor with an ADC connection. I would like to purchase the new Mac Mini, but would like to use his current monitor. I know there is an ADC to DVI adapter, but the new Mac Mini uses the Mini Display...could I use yet another adapter? I am trying to save money, but don't want to the display quality to be really poor. Space is not an issue. Any help would be greatly appreciated.

I have located that, but my concern is the DVI connection to the Mini Display connection on the Mac Mini. My understanding is that they are different.

LCD Monitor with B&W G3 Tower

Hello, I am looking to replace my 17" Apple Studio Display CRT on my G3 B&W Tower with an LCD monitor. My questions are: 1) Will my computer (VGA port) accept any current LCD screens on the market, or do I have to stay with Apple's LCD monitors? 2) There are several Apple Studio LCD Displays offered on eBay. They mention DVI and ADC connections. How do I know which models will work with my B&W G3? Forgot to mention that I have upgraded the processor with a Sonnet G4 500Mhz. Thanks.

Hi,
your B&W (like mine) should be equipped with a standard VGA output on your video card, which should accept any monitor with a VGA connection.
I tried a couple of LCD (a Samsung and a Hewlett Packard) which worked flawlessly and did not give me any problems.
I am not sure whether you can connect any of the current generation Apple flat screens due to the different interface, but you surely can take advantage of any VGA equipped LCD.
cheers

3 Monitors with 1 iMac and 2 Cinema Displays conected to Windows Gaming PC Help!

Hi
I want to set up a 3 monitor gaming set up with 1 iMac in the middle and 2 cinema displays either side. This would be a tripple monitor set up.
I am looking to set up a new computer and i want to have 3 monitors. I also want to have an iMac so i want the iMac in the middle and two cinima displays next to each other. i Want to also conect these monitors with a Windows 7 gaming PC.
I want to hook up my very powerfull windows 7 gaming computer wich has 3 SLI GTX 560 EVGA cards. These cards have a display port output.
So i want to run 3 monitors from my gaming machine and i also want to have my iMac use the 3 monitors aswell. I also want to take advantage of the full, maximum resolution. I would get the thunderbolt cinema display monitors.
Gaming comupter has 3 display ports so i need to connect each graphics card to one of the monitors. I then need to conect the two cinema displays to the middle iMac.
I have not bought anything yet i just need to know if i can do this. Need to know stuff like what adapers to buy and what compatabilties.
I need to know if this is posible and how i would do it.
Thanks

Could i use some of these cables?
It says they are thunderbolt conpatable.
http://www.macfixit.com.au/shop/index.php?_a=viewCat&catId=229
http://www.macfixit.com.au/shop/index.php?_a=viewProd&productId=2444

How to use two monitors with my Mac mini

Hello,
I have a Mac mini and using a 20" Samsung Monitor with it which works well. I also have my 40" LCD Samsung telly, set up next to it. Whenever i watch a DVD using my Mac i have to swap over the cables. Is there a way of getting the right cables etc and making it so i would be able to watch a dvd on the 40" and still use the 20" surfing the net etc. I had a similar set up with my old windows laptop, but cant seem to work out how do it with the mac. Both monitors have modern sockets, the 40in has HDMI/DVI IN and AGV, the 20" has AGV and HDCP/DVI IN. Many thanks.

To the best of my knowledge there is no way to use dual displays on the Mini. You may be able to find some adapter that will allow you to physically connect two displays, but they will be mirrored, not spanned.
To do what you describe would take spanning, which the Mini is not capable of doing. Unless something has changed recently,..

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI in without any additional software or graphics adaptor. I have a 520-1070
HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not recognized.

Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to use one monitor with two Power Macs

I searched this forum and was unable to find an answer. Although I believe it's probably here.
Nevertheless, I have a Power Mac G5 and a rarely used Power Mac G3. I'd like to share the G5's VGA Accusync 120 CRT monitor with the G3. I know there is a way to switch the monitor between computers without pulling plugs in and out of the machines.
Does anyone have any specific switch I could buy to solve this issue. I don't care so much for picture quality for the G3. But I don't want to compromise picture quality for the G5.

You're looking for what's called a KVM (Keyboard, Video, Mouse) switch.
This one should do what you're looking for. I've not used it, but it does VGA switching like you want and is inexpensive.

Can i have multiple monitor with my mac mini ?

Can i have multiple monitor with my mac mini like i do with my PC ? 2 differents screens.. not mirror.

There's lots of Mac Mini models since 2006 or so. What do you have?
Most support two monitors but how you do it is different depending on model.
Put this phrase into Google
dual monitors, mac mini
and you'll come up with the solution needed based on which MM you have.

Can I use my old apple monitor with a new mac mini?

Can I use my old apple monitor with a new mac mini?

Probably. Any information about the monitor?

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help! Further info: I am a complete newbie to Mac. Had three macs prior to 2000 then four PCs. Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back) with the F4 function key. While I can get the background image from my MBA to display, that's it. Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on. So Idragged it over to display in the centre. But that's all that's there. And now I have gone out of those web pages but they are still displaying on the monitor. There is some wierd disconnect. I'm sure it is just a setting thing. Will keep searching for answer but any advice welcome!

Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you.

Pressure & temperatur​e monitoring with cRIO-9082

Similar Messages

Maybe you are looking for

Pressure & temperature monitoring with cRIO-9082