Prestage Content from SCCM2007 PCK files

Hi everybody,
I am in a migration scenario from SCCM 2007 to 2012.
I have a full infrascructure with 2007, and saved pck-files from a backup of an old 2007 Server in Asia
Additional, I have a 2012 Infrastructure with a Primary Site in Germany an a secondary server in Asia.
I have a lot of packages migrated to 2012. Now, the transfer of the binaries is scheduled as next task.
Is there a possibility to prestage 2007 pck files to the 2012 secondary site content library from the pck file backup in asia?
So, it is not necessary to transfer the whole binaries over the slow wan link from germany to asia (source files are existing in germany).
For your information, there is a shared dp in another asia country in the 2012 infrastructure available, but still not migrated.
So, I cannot use this dp as a source for creating the prestage content file, right?
Is there anybody with an idea?
thanks for your help
best regards
Marius

thank you everybody for your fast help.
I discussed the problem with the customer last days.
We will migrate an old, shared 2007 Secondary site Server to a 2012 Distribution Point.
So, the packages are converted. Then, we will use this Server, closer to the Destination Server to Transfer the packagages to the destination.
I agree with you, the 'FedEx' solution will be the best way to ensure the packages will transfered with the best traffic optimazation.
So, the thread is closed for me :-)

Similar Messages

Easy way to add content from a last file like a word document?

Is there somebody who can tell me how i can display content from a word file.
I have files with content inside on my network for example a word document.
Inside this document i've got hyperlinks to content on other pages from the same document. Is the a way or a method how i can display the content in the portal.
Do i need to cut and paste the word content of should i save the content as a XML or a HTML document and then add the document to portal
Regards
Andre

Yeah, I have an idea... Have you tried the pdf export yet? If it is already formated then that maybe the way to go. But you may need acrobat to save it in another format. If I recall InDesign renders the pdf, which would make editing the pdf in Indesign useless.
OK, did a quick test with PDF. Load the PDF into Acrobat and save as a word file. Place the word file into InDesign and you will have the styles paragraphs. You just have to alter the style taste, may be fix a few paragraphs if needed.

HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop.

HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop. any Ideas. would be a great help. For Motion 4.

Try a hard reset:- hold the home button AND the power switch - ignore the red "Slide to power off" and wait ubntil the iPhone powers down, and then restarts - at the Apple logo, release all the buttons and see if your contacts reappear.

Get the content from the PDF file IN WD ABAP View

Hi all,
I have a offline interactive form with data filled in that and save in my desktop. I want to upload the PDF content ( data ) into Web dynpro view.
Currently i have the view designed with all the input box bound with the respective fields in the context and these fields are same as Adobe form fields.
I have a UI element to browse and pick the file from the desktop. I have the upload button to upload the data into it.
When i click the upload button it goes for dump. " No Enough Information for processing or Output"
*Get the content from the file
WD_CONTEXT->GET_ATTRIBUTE( EXPORTING NAME = 'PDFSOURCE' IMPORTING VALUE = CONTENT ).
In the above statement CONTENT is initial. Hence dump. I have take this source from SDN Blog.
Kindly help me where i went wrong.
Thanks in advance.I

Hi,
try my solution (reading dunamic table, but you can read any data from pdf xml) described here:
Dynamic Table data cannot be Read.
Regards Jiri

How do i split content from the text file using tab and spaces...?

Hi.. Just want to ask help to all the experts. Im new in java and i have this problem on how to split the contents of the text file. ill show you the contents in order to let you see what i mean.
FileName: COL.txt
AcctNo AcctName Primary Secondary Status Opendate
121244 IPI Company Noel Jose Active 12/05/2007
As you can see the content i want to split it per column.. Please help me

Jose_Noel wrote:
Hi prometheuzz,
What do you mean by one thread...?You created two threads* with the same question in it. That way, people might end up giving you an answer that has already been posted in your other thread: thus wasting that person's time.
Just don't create multiple threads with the same question please.
* a thread is a post here at the forum

Help on retriving the content from a excel file and web page

hi,
i need help on identify the content on a webpage. how to do this ?
in myproject i need to read an excel file how to read an excel file , in java?
after reading the excel file ,i have to open a webpage based on the link available in the excel file.
how to perform this action?
and from the web page i need to retrive the each individual text
how to perform these action?
please help .... urgent
regards,
valli

sales team will enter data in excel file .
the excel file will have a list of links ,
i need to access the excel file and open that link.
from the link i will get some information ,such as
company name, address, phone no, contact details.
i need to identify each individual (address, email
id) from the web page and store that data in the data
base .
how to access a excel file from java?
i found in google jakartha-poi-jar file.
but ther eare many jar file. which one i have to
download?
how to identify from a web page these different
items?
thanksPlease answer DrClaps's question from reply #3.

Pdf with table of contents from a Pages file

I discovered in a pdf file sent to me that it has a table of contents in the sidebar where thumbnails, and annotations also reside.
When I create a pdf from my pages document this is not available.
In the table of contents sidebar are the words 'No Sections'. How do I create sections for every para styled as a heading so that they show in the table of contents sidebar of the pdf file.
I have been using outline to navigate in the pages file but the pdf would be simpler for me to do under meeting conditions.
PAM

Your son was probably referring to *Adobe Acrobat Pro*. But I can't see how that would help with the sidebar automatically.
In *Acrobat Pro* it would be a matter of selecting each head to make a bookmark from that and then resave the .pdf file with the bookmarks sidebar showing upon opening.
You can also add and edit bookmarks in Preview.
+Preview > Menu > Bookmarks > Add Bookmark/Edit Bookmarks…+
I did a further experiment with a Pages document with bookmarks to see if that created the sidebar with bookmarks, but it didn't work.
There are differences in the ways Preview and Acrobat Reader display .pdfs even with what seem to be straight forward settings. I can never depend on a uniform display.
Particularly where PC users are involved.
Peter
btw When you viewed your Pages document with your TOC did you set the Preview sidebar to show "Table of Contents" in the little icons at the foot of the Preview sidebar.

How do I export content from an InDesign file to a database?

I have this project that I'm working on where I need to do the reverse thing of what people normally do it seems - I need to take content that's available in InDesign and export that to a database. From my research, I'm attempting to do this by tagging content in InDesign and doing an xml export. This seems to work well except the resulting content is cluttered up with some things which are automatically tagged (Tables and Cells) and more importantly the exported xml does not contain linebreaks. The former problem I can work around (I can just have the import script ignore table and cell tags) but the latter problem is a loss of information so there's no workaround. Any help is appreciated.

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

Any way to import content from AW7 packaged file to modify and repackage?

Hi, I am new to AW. Trying to take an existing aircraft systems training program and merge it with another training program that was written with AW5, which modules are not compatible with AW7. According to the help file, when packaged, the flowlines and icons used to design the program are removed and no longer accessible. Is there any way to import the content and redesign and tailor to my specific needs? Thanks.

Douglas,
Are you talking about packaged Authorware 5 files? Because it sounds like you are quoting info about packaged files...
The Authorware 7 authoring tool should be able to open and convert Authorware 5 source files. If all you have a repacked files there's not really anything you can do.
Steve

Help~ Get Tag content from input HTML file

I would like to build an index with the Tag content of the input HTML file.
Is there any convenient way to retrieve such Tag information?
Thanks

http://onesearch.sun.com/search/onesearch/index.jsp?qt=html+parser&subCat=&site=dev&dftab=&chooseCat=javaall&col=developer-forums

Read contents from a blob file

hi all
i have data stored in a blob file
and i want to show the data in the fields
but when i am showing the data i am not getting the data in the desired format
eg
if i have stored a name (Mandar )in the blob file
when displaying in the blob field i am getting something like aaaaabbbjddddd (example)
i am not well versed with this
can u please guide me through it ?
thanks
Mandar

What you are getting is raw format. You need to use:
UTL_RAW.cast_to_varchar2 (p_raw);
in order to make it readable.
Denes Kubicek

Reading from a text file and displaying the contents with in a frame

Hi All,
I am trying to read some data from a text file and display it on a AWT Frame. The contents of the text file are as follows:
pcode1,pname1,price1,sname1,
pcode2,pname2,price2,sname1,
I am writing a method to read the contents from a text file and store them into a string by using FileInputStream and InputStreamReader.
Now I am dividing the string(which has the contents of the text file) into tokens using the StringTokenizer class. The method is as show below
void ReadTextFile()
                    FileInputStream fis=new FileInputStream(new File("nieman.txt"));
                     InputStreamReader isr=new InputStreamReader(fis);
                     char[] buf=new char[1024];
                     isr.read(buf,0,1024);
                     fstr=new String(buf);
                     String Tokenizer st=new StringTokenizer(fstr,",");
                     while(st.hasMoreTokens())
                                      pcode1=st.nextToken();
                           pname1=st.nextToken();
          price1=st.nextToken();
                          sname1=st.nextToken();
     } //close of while loop
                } //close of methodHere goes my problem: I am unable to display the values of pcode1,pname1,price1,sname1 when I am trying to access them from outside the ReadTextFile method as they are storing "null" values . I want to create a persistent string variable so that I can access the contents of the string variable from anywhere with in the java file. Please provide your comments for this problem as early as possible.
Thanks in advance.

If pcode1,pname1,price1,sname1 are global variables, which I assume they are, then simply put the word static in front of them. That way, any class in your file can access those values by simply using this notation:
MyClassName.pcode1;
MyClassName.pname1;
MyClassName.price1;
MyClassName.sname1

Locked SCCM Client Package waiting for prestaged content, Cant use Client Push

Hi there,
I am having an issue with client push. When initiated the client is unable to find the client install package on the DP. The CCMSETUP log file on the client reads "MP xxxxx.xxx.com didnt return DP locations for client package with the expected
version". This could be caused by a boundry issue but the boundry information is set up correctly, and published into AD.
The SCCM Client on the site server is not getting replicated properly to the DP's that we have setup and I think that this is causing the issue. The reason why its not gettiog to the DP is due to this error: "Distribution Manager is waiting for Package SG100001
content to be prestaged on the distribution point" when we look at the content status of the SCCM client Package.
We are unable to change the prestaged distribution point settings "automatic" as the package is the locked as its the SCCM client installation package and its waiting for us to prestage it on the DP. I have tried prestaging it, but it didnt
work
Any ideas as I have been stuck for two days on this now...
Thanks in advanced.
George

Torsten you were right, The solution was as follows for anyone else having the same issue.
As soon as you create a DP it appears that the client installation package automatically tries to distribute to the DP. If you created the DP as "Enabled for Prestage" while doing the setup then the SCCM client package will just wait for you to
copy it manually. To reslove this I had to remove the "Enabled for Prestage Content" from the DP then go into the SCCM client Package, content location tab, select the DP and redistribute the package to the DP.
Checking the Distribution Manager and PkgXferMgr.log assisted me in monitoring the content transfer to the new location.
Thanks for your assistance.
George
George, I too concur that this fixed the issue.
I had the same problem with my SCCM 2012 R2 CU4, where i updated the distribution point for the Configuration Manager Client Package. Thanks a million!

Finding then combining content from several indesign documents in one document

Hi everyone,
I wonder if someone can help...
I'm trying to write scripts for indesign server which I want to:
a) search for,
b) pick out, then
c) put together content from one or many indesign documents into a template on the server starting at a pre-defined point in the template.
After that we produce a pdf of the document to pass on / do whatever. I've got so far with the scripting documentation but I'm stuck! This is what I've done so far:
1/ create a document template with a script
2/ add text elements to the document template (header and footnote, title,       body text i.e. intro and data, and the contact details)
3/ add text / content from another indesign file into this       document (so far only done it with a .txt file) ...
... I'm stuck on the indesign documents at the moment. I have       looked at various options, the most appropriate way I can see in       the manuals to get content from one document to another is by       duplicating. My understanding is to do this you have to target the text in the source       document, duplicate it and then add it into a text frame on the       target document. It's the targettting of the text and surrounding       elements in the source document I'm battling with.
any ideas on how I go about this effectively?
Any help and advice appreciated!

The story so far...
I've added the code kindly provided by getZinger (thanks again!) and am now stuck on the next stage, . I've commented the code where I'm having problems, and essentially have two key issues to resolve:
1/ how I get the documents to be placed one after the other, avoiding the overlay I get on the first insertion page.
   (I am using a fixed value as an insert point as the template I'm using will always have inserts starting on page 3).
2/ how I access the pdf's I want to insert from a location other than C:\Users\Whoever\Documents\
try{
for(myCounter = app.documents.length; myCounter > 0; myCounter--){
app.documents.item(myCounter-1).close (SaveOptions.no);
myDocument = app.open(File("C:/.../template.indd"));
myPDFFiles = ["pdf1.pdf","pdf2.pdf","pdf3.pdf"];
insertPdf();
function insertPdf(){
//I've gone for a static number here as the datapage in the skeleton doc is page 3.
//This seems to result in some of the pages being placed on top of each other :-(
    var myPage = myDocument.pages.item(2);
    /*var myPageNames = new Array;
    //Get the names of the pages in the document
    for(var myCounter = 0; myCounter < myDocument.pages.length;myCounter++){
        myPageNames.push(myDocument.pages.item(myCounter).name);
    var myPDFSet = File("C:/Users/Simon/Desktop/Mexico.pdf");
    for(myIndex=0;myIndex<myPDFFiles.length;myIndex++){
    myPDFSet = File(myPDFFiles[myIndex])
    myPlacePDF(myDocument, myPage, myPDFSet);
    myDocument.exportFile(ExportFormat.pdfType, new File("C:/.../test_insert.pdf"), false);
    myDocument.close(SaveOptions.no);
}catch(e) { myDocument.close(SaveOptions.no); }
function myPlacePDF(myDocument, myPage, myPDFSet){
var myPDFPage;
app.pdfPlacePreferences.pdfCrop = PDFCrop.cropMedia;
var myCounter = 1;
var myBreak = false;
while(myBreak == false){
if(myCounter > 1){
myPage = myDocument.pages.add(LocationOptions.after, myPage);
app.pdfPlacePreferences.pageNumber = myCounter;
//the files seem to be automatically placed from C:\Users\Whoever\Documents
//I need to change this to accept a different file path somehow but I don't know how
//this is why the myPDFFiles array only has filenames at the moment
myPDFPage = myPage.place(File(myPDFSet), [0,0])[0];
if(myCounter == 1){
var myFirstPage = myPDFPage.pdfAttributes.pageNumber;
else{
if(myPDFPage.pdfAttributes.pageNumber == myFirstPage){
myPage.remove();
myBreak = true;
myCounter = myCounter + 1;
once again, thanks for taking the time to read this, any help greatly appreciated :-)

SMARTFORM - Part of variable content missing in otf file

Hi colleagues,
In my smartform, I have variables, defined as STRING, which contains HTML coding to generate URL links in the final document.
The variable is correct and ends with '</a>'.
But in the otf file, the result is sometimes wrong. The variable is splitted into several lines (no problem), but the last line is somehow shorted... I only get '</'.
Due to that, end of URL is not recognized and the whole content below this unless link appears as part of the link.
This seems to be related to the length of the variable content.
If it is short enough (but this I could not insure), the code is complete and everything works fine.
Does this means that my url should be splitted to never exceed a certain limit (254 or 255 chr).?
thansk for your help,
Barbara

Hi,
Thanks for feedback.
Lengh is the issue. If I split the single varaible into several to only have 255 chars in each of them, it is possible to not loose part of the content.
I try to put the two variables (part1 and part2) on the same line in SMARTFORM without any separators. This has exactly the same effect than if I use one varaible which exceed 255 chars. The content of the 2nd one is lost in the OTF.
I then insert a blank between them, and I do not loose anything in the OTF.
Unfortunatelly, due to the separator, the URL is also split in 2 parts on my final content, which is not really good.
Splitting the label is not beautiful, but not dangerous. Adding one space in the URL may leads to not working link.
I will try to consider this issue when preparing the content from the OTF file.
If you have any hints what to consider, I would appreciate.
Kind Regards,
barbara

Prestage Content from SCCM2007 PCK files

Similar Messages

Maybe you are looking for