Prestage package status not updating on the server

I have been successful in extracting other prestage packages on DP but for 2 packages, it extract them fine as per the logs and sends the status to the MP as well but the server doesnt reflect the updated status.
prestagecontent.log shows the following
Management Point: 'http://<MP Name>'
Site Code: '<Sitecode>' PrestageContent
DP server: '<DP server name>'
NAL Path: ["Display=\\<DP server name>\"]MSWNET:["SMS_SITE=<sitecode>"]\\<DP server name>\'                PrestageContent
Set authenticator in transport    PrestageContent
Sent <packageID> package state message to site
End ====
What could be the reason, i have tried to recopy the packages from the original source and tried extracting 2-3 times
using the extraction switch "/f" as well but didnt reflect the status.
Prestage option is already checked.

Distmgr.log has the below entries although they were not in red
Will reject STA for DP ["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\ as it does not exist in the PkgServers table       SMS_DISTRIBUTION_MANAGER
7/4/2014 10:07:50 AM    6180 (0x1824)
Will not process this invalid package status file from remote DP ["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\, delete C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA
SMS_DISTRIBUTION_MANAGER              7/4/2014 10:07:50 AM         6180 (0x1824)
STATMSG: ID=2354 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Primary server name SITE=SITE CODE PID=7420 TID=6180 GMTDATE=Fri Jul 04 04:37:50.055 2014 ISTR0="C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA"
ISTR1="["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\" ISTR2="SITE CODE001C5" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE CODE001C5" AID1=404 AVAL1="["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE
CODE"]\\DP server name\" SMS_DISTRIBUTION_MANAGER              7/4/2014 10:07:50 AM       6180 (0x1824)
Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA        SMS_DISTRIBUTION_MANAGER
7/4/2014 10:07:50 AM         6180 (0x1824)
There are no entries in pkgxfermgr.log

Similar Messages

Prestage Package status not reflecting on the console

Hello,
I have extracted some prestage packages successfully on the new DP but for some reasons, it doesn’t reflect the status on the primary server. After troubleshooting, I found
this article which describes my issue similarly.
http://eskonr.com/tag/sccm-2012/page/2/
Where it says, “Will reject this STA for DP”, that similarly matches with my concern.
I have followed the article regarding the script for compare the version difference but what I am not sure is, I believe it ultimately says to redistribute the content to
the DP once more ?
Let me know if I am wrong or if there is any other way as this is happening for many prestage packages.
Not sure how it started all of a sudden when it working since a day before.

Hello,
I have created a new prestage package and it extracted successfully as per the below message in Distmgr.log but for some reasons the status doesnt reflect on the console.
Please help as this is really urgent
Processing status update for package AAA SMS_DISTRIBUTION_MANAGER
11/12/2014 9:25:21 AM 11344 (0x2C50)
Successfully updated the package server status for ["Display=\\<DP server>\"]MSWNET:["SMS_SITE=SiteID"]\\<DP server>\ for package AAA, Status 3
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)
STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=<primaryserver>SITE=<SiteID> PID=19600 TID=11344 GMTDATE=Wed Nov 12 03:55:21.886 2014 ISTR0="AAA" ISTR1="["Display=\\<DP
server>\"]MSWNET:["SMS_SITE=<SiteID>"]\\<DP server>\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400
AVAL0="AAA" AID1=404 AVAL1="["Display=\\<DP server>\"]MSWNET:["SMS_SITE=<SiteID>"]\\<DP server>\"
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)
Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\BKP96Y8Q.STA
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)

TS3276 Yahoo! sent mail not updated in the server.

I have an issue with Yahoo! Mail. When I'd sent email from my Mail from my mac book air, it can be sent but a copy is not updated in the server, thus when I view from the web or other device I can't see it as it is not updated. I've checked the "store sent msg in server" in the mail preference.
I don't this issue with exchange and gmail.
Thanks

Right that is how the POP email protocol works. If you want all mail sent and received to always be on the Mail Server then you have to use a mail provider that allows, uses, either IMAP or MS Exchange.

Package status not appended in the Add Remove Programs in control panel after the installation.

Hi,
I have a strange problem with "Package status not appended in the Add Remove Programs after the installation.".
Like, onec the package is installed via SCCM, it should be listed in the Add Remove programs with the package name, version and the install date.
At times on random machine these details are not appended. Although the application works fine on the machine, but the correct details are not populated in Add/ Remove programs.
There is no issue with the package as it shows correct details on few other machine where it is installed.
This behaviour is random on random machines. Hence, very difficult to track the reason.
System Security analyst at CapG

Hi Jason,
Yes, i have tried Jorgen's suggestion, ans as said earlier. It install the application smoothly on any other machine (any random machine) perfectly with correct details in Add Remove Programs.
As mentioned earlier, the same package, same environment, same set of machines with same OS, it installs correctly on few machines.. and on few its just misses to add correct details in Add Remove progs.
If it was related to package, how does it install corretly on other machines?? How does the same package installs correctly when done manually or by that means by PSEXEC.
To a matter of fact, we are checking our package for the multiple times now, just to make sure it is buldled correctly with correct install scripts. We are trying to search different multiple ways to see what makes the package to skip the
correct entry in the Add Remove.
To add, this is not with one package, it happens with random package with random machine. There is not typical behaviour that could be tracked.
All the installations done via SCCM 07, with admin account.
This looks more tricky and complex then as simple as saying, its the fault of packaging.
I hate to say this but this is NOT a CM07 problem, You will need to work with your packaging team, and use tools like process monitor,psexec and the msi log to determine why it is failing.
Your first step is to find a pc where you can consistent get the setup to fails. once you get that you can use process monitor and the msi log files to determine what is going on.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

IOS 7 - my emails are not updating to the server

Hi all
I got an iPhone 5C with iOS 7.
I have set it up as a new phone, and set up my hotmail account on Mail. I can refresh my emails and new emails will push to my mailbox no problem.
However - when I read or delete one of these, it doesn't seem to update that to the server. So if I log on to Hotmail on my iPad or laptop, the emails are still in the inbox and appear as unread, even when I have sent to Trash, and then emptied the trash on my iPhone 5C!
Also, if I read an email first on the laptop, it still pushes it to my phone as a new unread email!
I have made sure I've emptied the trash by the way!
Any suggestions?
Cheers

Go to: Settings>Mai.....>the account(s) in question>Advanced>and change the Deleted from server setting to what you want (never?)

HT201210 not update to the server

when switch on it is showing iphone update server could not be contacted

Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.

Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

Hello Beckieor,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
iOS: Troubleshooting Wi-Fi networks and connections
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

The iPod software update server could not be contacted. the server does not support this version of itunes its saying

i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
Regards,
Brahma.

You need to update to the latest version of iTunes. Go to the apple and select software update.
i

Folder Redirection did not update to the new server

hello guys, I had migrated quite some time ago to a new server.
I thought everything works fine, basically the server functionality DNS, Replication and other stuff works fine.
But I notice that some of the workstation did not actually update its folder redirection to the new server.
Their desktop and my documents still points to the old server.
So their offline files, is becoming larger and larger.
I have some workaround but it's a lot of work. Question is, why those Win 7 workstation folder redirection did not update to the new server.
What should be the best practice? During the migration process from the old server to the new server, all workstation should be turned on?
Or any tools to update those workstation to the new server without losing their files?
Basically, just editing the registry to point to the new server will help. But it means losing their current files and whatever old stuff that is on the server will be the one that will be shown on their desktop and documents.
any inputs is greatly appreciated.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Hi biswajeetpattnaik, before migration it was Windows 2003.
Then I introduce Windows 2008.
Then I introduce a new Windows 2012.
Now Windows 2012 is the main DC.
Actually, everything is under control right now. As what I said on my first post, I manage to do some work around.
The only question I have on mind, is how on earth this thing happen.
I was assuming, that the workstation will be able to point to the new server, without any glitch since everything is working fine.
And the GPO was applying on the workstation. If I type gpresult /v on the workstation is it being applied. Even if I run GP Modelling it is also shows on the result that the folder redirection is being applied.
But to my surprise the folder redirection still points to old server, if I have not discovered it then it would be difficult if some files will get lost.
Thanks for your reply.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Print Module templates layouts do not update on the fly

Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?

Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem.

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

Prestage package status not updating on the server

Similar Messages

Maybe you are looking for