Pretty Print in windows 7

I am using Flash Builder 4 and Windows 7 and have installed the PrettyPrint formatting tool. Under Windows XP all worked find. Now when I start Flash Bulder 4 I see the formatting icons for about half a second in the toolbar and then they disappear. Formatting is not possible. Anyone any idea what is going wrong here?
Thanks

Hi,
You might need to check with the publisher of that, has he updated to the new version of eclipse?
Are you saying that you had fb 4 working on xp with pretty print?
Mike

Similar Messages

Printing from Windows 8 to a shared printer on a Windows 7 machine

WE have a a user that has a laser printer on A windows 7 machine that others in the office can access EXCEPT the one person on a Windows 8 machine. We have tried everything, but cannot get her to print to this printer. Says it cannot be found. What does
Windows 8 need to see a printer on a Win 7 workstation. She does have access to network printers and her own.
Thanks.

We have the same kind of problem but a bit different.
Dell Printer (used for years shared on a network) was moved to our Windows 7 machine plugged in via USB. We only use a plain workgroup with no Domain as we also have Macs on the network.
I have Macs using shared printer, a Windows XP using the shared printer, and even Windows 7 under Parallels on the Macs using the shared printer no problem.
I had the lone Windows 8 laptop using the shared printer but then it just stopped working. So I deleted it and now when I try to add it is want credentials and none work. It will not connect to the shared printer on the Windows 7 machine.
I have Windows 7 (which also has a couple shared drives that do work) set for No Homegroup and No Password for sharing - pretty much open as we are behind a Cisco Firewall to the outside. No firewalls on the pcs.
Not sure where to go from here...

Why won't my printer print with Windows 8?

Why won’t my printer print with Windows 8?
Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work? If so, this may help you. A lot of people have questions about installing their printer on a new OS. This will help you answer those questions and make sure that you get everything installed.
Before You Start
Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS. The link below will give you a list of the printers that will work in Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer. It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
Another thing to consider is how you want to connect the printer to the computer.
USB. You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m). Make sure to connect the printer directly to the computer. Do not use a USB hub.
Ethernet cable. Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
Wireless. You should make sure that you have the wireless network setup, and that you have the password for the wireless network.
1.     Installing Via USB
Installing via USB in Windows 8 has become much simpler for HP printer users. In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection. If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install. In Windows 8, that will not be a problem. If you plug the printer’s USB cable in and then install the printer’s software, it will still work. Now for in depth instructions on installing the printer via USB click the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
2.     Installing Via an Ethernet Network Connection
For an Ethernet network connected printer the install is amazingly simple. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s really that easy.
http://www8.hp.com/us/en/support-drivers.html
3.     Installing Via a Wireless Network Connection.
For a wireless network connected printer the install is amazingly simple as well. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s pretty much the same as an Ethernet install, just wireless.
http://www8.hp.com/us/en/support-drivers.html
Alternate Install Methods
With Windows 8, many printers’ drivers are installed with the OS. These are known as InOS drivers, since they come built into the operating system. If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless. Once you have that done Windows will handle the rest. There are alternate methods of installing your printer if the normal methods are not working for some reason. You can install the printer either using the Printer Install Wizard, or through Windows Updates.
Printer Install Wizard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
Windows Update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date. Check the support site linked below for driver availability. I will update this post once they become available.
http://www8.hp.com/us/en/support-drivers.html
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this answers some questions.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IMac to print to "shared" printer on Windows XP Home

I have just returned to the Mac world. My first MAC was one of the first MACs ever made (1984) - it's in the basement and it still works.
I have a new iMac G5. I was able to transfer all the files I wanted from my laptop (Windows XP Home) to my iMac without any problems.
What I can not do is get the iMac to access the HP DeskJet 932c printer that is connected to my DELL (Windows XP Home). The printer is "shared". My laptop has no problems connecting to the printer.
When I follow the instructions with the iMac, the iMac finds the DELL computer, I'm able to access (login) to the DELL computer but no printers are listed.
I suspect it is because it is not really a Windows "workgroup" as the Apple documentation talks about, but a "shared" printer within Windows XP Home.
I'm sure that there is a solution, after all, this is a MAC!

Depends on what Mac software you have?
Currently nothing other than that which ships with the Mac - I have had it for less than a week.
Also the G5 iMac is pretty well proven technology,
these are first revision Intel Macs.
Good point and this is the one potential drawback to the switch.
Personally I would go for the Intel Mac, as Steve
Jobs said, it is the same as thew G5 iMac, jsut twice
as fast!
I'm going to do this and that's why I'm going to mark my question as answered. Hopefully the next Mac will work with my XP printer!
Thanks again for all your help.
Your website for help about the printer is excellent. It is rare to find something as well explained and perfectly documented. I give it a 4+ (I'm a teacher and in our education system we "level" student work - level 4 is the highest level!)

Xml formatting (pretty print, etc)

Our MXML is getting a bit messy. (we also need a pretty
printer and simple
xml exploration and editing) for soap feeds.
1. Is there something in Eclipse now that does this?
2. Is there a publicly available plug-in
3. Is there some simple (i.e. cheap or free tool) for doing
this. XMLSpy
would be overkill.

Excellent directions, Yes, this is exactly what I needed to
know. It now
works fine.
Only one item to note. Even though I did not set XMLBuddy as
the default for
*.mxml
-- If I do the context menu (right click) and choose xml
buddy, then it will
stay sticky for that file the next time. The same as with
using the
FlexBuilder mxml editor. Not a real problem but what does
"default" mean any
more if the IDE is trying to be so smart as to decide for me
what my default
should be :-)
"Mark Shepherd" <[email protected]> wrote in message
news:[email protected]...
> There is no XML or MXML formatting built-in to
FlexBuilder or Eclipse.
>
> But don't despair, there are 100's of plugins available
for eclipse, here
> is one way that works...
>
> 1. install the XMLBuddy eclipse plug-in from
xmlbuddy.com
> 2. in flexbuilder, go to Window > Preferences >
General > Editors > File
> Associations
> 3. select *.mxml in the top panel, then click "Add" in
the bottom panel
> 4. choose XMLBuddy, then OK, then OK
>
> You can now open any MXML file using the XML editor
(xmlbuddy) rather than
> FlexBuilder's normal MXML editor. To do this, select the
file in the
> Navigator panel, then right-click and choose Open With
> XMLBuddy. Once
> you are in the XML editor, you can select a range of
text (or the entire
> file, if you like) and choose Format from the XML menu.
>
> This technique will work for any XML-based file format,
including MXML,
> soap documents, RSS feeds, etc.
>
> There are probably other way to do this. Does anybody
have other
> suggestions?
>
> Mark Shepherd
> FlexBuilder Engineering
>
>
> Yechezkal Gutfreund wrote:
>> Our MXML is getting a bit messy. (we also need a
pretty printer and
>> simple xml exploration and editing) for soap feeds.
>>
>> 1. Is there something in Eclipse now that does this?
>>
>> 2. Is there a publicly available plug-in
>>
>> 3. Is there some simple (i.e. cheap or free tool)
for doing this. XMLSpy
>> would be overkill.
>>
>>

Pretty Printer ONLY for selected lines in ABAP editor?

Hi,
I have done SETTINGS(Menu----Utilities) in PRETTY PRINTER in my ABAP editor that, all KEY WORDS shuld b in UPPER CASE.
Say, I hv written code(in raw format, not yet pressed the PRETTY PRITER) like below,
ABAP Code Line_1
ABAP Code Line_2
ABAP Code Line_3
ABAP Code Line_4
ABAP Code Line_5
I want to hv pretty printer format for Line 3 and Line 5 ONLY!! I do not want to hv it for other lines, so, I high lighted(selected) those lines (3 and 5) and pressed pretty printer, but, am getting the pretty printer format for all the rest of the code as a single shot!!
So, pls. let me know that, How I can get the pretty printer format ONLY for the lines, for which I wished(selected by high lighting)?
And also let me know, How Can I do automatic(not manually) indentation for my code as a part of pretty printer? Actually, I tried but, am not getting even though I checled the check box intendation in SETTINGS!!
Thank you

Hi ,
Preety printer will work on all the code that is avaliable in window,
In case. if you want to do partial , copy your code in seperate window and do Pretty Printer for it.
Refer http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ad6454211d189710000e8322d00/frameset.htm for other queries.
Edited by: Harsh Bhalla on Nov 27, 2009 9:17 AM

Any ideas on a nice BSP view pretty printer?

Hi there,
I am wondering whether somebody already tried to extend the SAP standard pretty printer by an own functionality which fits better for pages with mixed content, containing not only BSP-elements but also HTML-tags.
The standard pretty printer considers everything as plain text which is not a BSP-element and leaves it unaltered. Only BSP-elements are arranged according to their tree structure.
This produces ugly results for pages with mixed content.
1.) Requirement
A Pretty Printer for HTML-based BSP views should cover the following:
(a) HTML-Tags and BSP-elements together form the chain. As in following example:
<z:table table_id="testTab" binding="//test/gt_test" rows="5">
<z:tableBody position="top">
    <colgroup>
      <col width="4%">
      <col width="96%">
    </colgroup>
</z:tableBody>
<z:column name="type" header="<%=zcl_bsp_util=>dtel_text_s('EDI_TTYP')%>"
            listPos="10"/>
<z:column name="text" listPos="20"></z:column>
</z:table>
(b) Certain HTML formatting tags like I, B, etc. should not be added to the stack but be treated inline.
(c) HTML-attribute names should be converted to lower case, the attribute values should be quoted.
(d) Like for BSP-elements, there should be a threshold after which the attributes should appear in separate lines. Instead of a certain maximum "number of attributes", this could also be a maximum number of characters per line.
(e) Scripting Tags (<% ... %>) should start at a new line, if the content contains new-lines.
(f) Evaluation Scripting (<%= ... %>) should be inline, if they are contained within text nodes (and not within HTML oder BSP element nodes).
(g) The Pretty Printer should be parametrizable (with parameters like indent-depth,... ).
2.) Exits?
Of course, one could always use an external HTML editor and write an add-on for that editor which produces the desired result. Or one could take the view content into the clipboard, paste it into a plain text editor like UltraEdit or TextPad which allows external commands, apply an external, self-written pretty printer to it and then paste the result back into the View. But it would be easier to use the "Pretty Printer" button directly to get the result. Therefore the question arises at which point the standard Pretty Printer Functionality could be modified or extended.
I didn't find an exit. But the pretty-print itself is doubly-decoupled in the standard which minimizes the number of points where an extension has to be made:
2.a) First decoupling point: The Fcode handler method pretty_printer_ext( ) in cl_o2_page is calling
dynamically a method in cl_o2_co2_processor:
* call pretty printer
create object pp type ('CL_O2_CO2_PROCESSOR').
appl_str = me->pagekey-applname.
page_str = me->pagekey-pagekey.
try.
      CALL METHOD pp->('PRETTY_PRINT')
        EXPORTING
          indent              = 2
          ATTRIBUTE_NORMALIZE = 'X'
          ATTRIBUTE_THRESHOLD = 2
          BSP_UNFORMATTED     = source
          appl                = appl_str
          page                = page_str
        IMPORTING
          test_ok             = test_ok
          BSP_FORMATTED       = pp_source.
    catch cx_o2_co2_exception into o2ex.
2.b) Second decoupling point:
The method pretty_print() of class cl_o2_co2_processor (fancy names, by the way. It seems that many former chemistry students had joined the BSP team ),
there is a second delegation, to a local class, as follows:
data pretty type ref to LCL_BSP_PRETTY_PRINT.
pretty = LCL_BSP_PRETTY_PRINT=>getInstance( processor = me ).
The real logic for doing the Pretty Print, finally, is performed in this local class.
3.) Implementation.
Since, up to my knowledge, there is no HTML parser in the ABAP world,
the implementation could be based on existing HTML Parsers, like the Perl module Parser::HTML, or the Java package http://htmlparser.sourceforge.net/ . The pretty printer could then be called as external OS command.
Are there any ideas out there? Or is there somebody who already worked in this direction?
Regards,
Rüdiger

For those who are interested. I found out that the Dave Ragget's classic "HTML Tidy" (see <a href="http://tidy.sourceforge.net/">http://tidy.sourceforge.net/</a> ) is available in ABAP! There is a class CL_HTMLTIDY (at least here in my SAP_BASIS 700 system) which wraps calls of HTML Tidy by kernel modules.
The class is undocumented, but there are 2 OSS notes of this year for it, so it might well be that it is alive.
HTML Tidy can surely not directly be used for Pretty Printing BSP views, but for designing test cases or for doing things like HTML parsing, it might be a helpful tool.

Printing in Windows 8 and Windows RT

Wow! It Just Prints
You can easily print when you connect your new Windows 8 tablet, laptop, or desktop to your existing network with this HP printer.
HP has included basic (in-OS) drivers for your printer with the Windows 8 operating system and published two Windows 8 store applications.
What “just works”
Basic direct and network print from Windows 8 start tile programs like Internet Explorer, Google Chrome, and Firefox.
Basic print from desktop applications
Scan from desktop applications like MS Word and Paint.
Ink Level information from HP Printer Control and Scan from HP Scan and Capture Windows 8 store application.
You do not have to download any software or insert the printer CD.
At a high level, three steps are needed:
Connect the new Windows 8 tablet or PC to a home network with a connected HP Printer
Download HP Printer Control from the Windows 8 store.
Download HP Scan and Capture from the Windows 8 store.
Connect the new Windows 8 tablet or PC to a home network with a connected HP Printer
1.1. After a tablet or PC with Windows 8 is connected to a home network, HP basic print and scan drivers are connected automatically.
1.1.1.   To print from an internet browser, move to the far right of the screen to open the “charms” menu, and open devices
1.1.2.   Networked printers will be displayed as an option to print to.
1.2. From the desktop, open an application and choose file > print.
2 Download HP Printer Control and HP Scan and Capture from the Windows 8 store.
3.1. View Ink Levels and other printer information from the HP Printer Control
3.3. Scan from HP Scan and Capture
To have fuller features of your printer, install the full featured hp.com drivers.
This is need to get:
                        boarderless photo printing
                        scan to pdf
                        toolbox functions like printer maintenance
From HP Printer Control, select “Get Full Featured Software”.
Please Note: The Full solution Software does not install on Windows RT as it was not designed for the Platform
List of the products that support this method of Network Printing
Product Name
HP Officejet Pro X551dw Printer
HP Officejet Pro X451dn Printer
HP Officejet Pro X451dw Printer
HP Officejet 7100 Wide Format
HP Officejet Pro 3100 Black and White Printer
HP Officejet 7600A Wide Format e-All-in-One
HP Officejet Pro 200
HP Officejet Pro 250 MFP
HP Officejet Pro X576dw MFP
HP Officejet Pro X476dn MFP
HP Officejet Pro X476dw MFP
HP Officejet Pro 3610 Black and White e-All-in-One
HP Officejet Pro 3620 Black and White e-All-in-One
HP Officejet 150 Mobile L511
HP Photosmart 7520 series
HP Deskjet 2520 series
HP Deskjet 3510 series
HP Photosmart 6520 series
HP Deskjet 6520 series
HP ENVY 120 series
HP Deskjet 2020 series
HP Deskjet 2510 series
HP Photosmart 5520 series
HP Deskjet 5520 series
HP Deskjet 3520 series
HP Officejet 4610
HP Deskjet Ink Advantage 4615 All-in-One
HP Officejet 4620 plus e-All-in-One
HP Deskjet Ink Advantage 4625 e-All-in-One
HP Officejet 100 Mobile L411
HP Officejet 6600 All in One
HP Photosmart 5510d series
HP ENVY 110 e-All-in-One Printer D411
HP Photosmart 7510 series C311
HP Officejet Pro 8600 e-All-in-One
HP Officejet 6700 Premium e-All-in-One
HP Officejet 6100 ePrinter
HP Officejet Pro 8100
HP Photosmart 5510 series
HP Photosmart 6510 series
HP Deskjet 3070 B611 series
HP Deskjet 3050A J611 series
HP Deskjet 3000 J310 series
HP Deskjet Ink Advantage 2060 K110
HP Envy 100 D410 series
HP Deskjet 3050
HP Officejet 6500 E710n-z
HP Officejet 7500 E910
HP Officejet Pro 8500A e-All-in-One Printer - A910a to f
HP Officejet 6500 E710a-f
HP Deskjet Ink Advantage 210
HP Deskjet 1000 J110 series
HP Deskjet 2000 J210 series
HP Photosmart Plus All-in-One B210 series
HP Deskjet 2050
HP Deskjet 1050
HP Photosmart B110 series
HP Photosmart B010 series
HP Photosmart Ink Adv K510
HP Photosmart Prem C310 series
HP Photosmart Prem C310 series
HP Photosmart Wireless All-in-One D110 series
HP Photosmart C410 Series
HP Photosmart Prem C410 Japan
HP Photosmart eStation C510 series
HP Photosmart eStation C510 Japan
HP Officejet 4400 K410
HP Officejet 4500 All-in-One G510g to m
HP Officejet 4500 Desktop Edition All-in-One G510a to f
HP Officejet Advantage 4500 All-in-One K710g
HP Officejet 4575 All-in-One K710a
HP Officejet 4500 Wireless All-in-One G510n to z
HP Officejet 7000 Wide Format Printer
HP Deskjet F2400 series
HP Photosmart Plus B209a-m
HP Deskjet D5500 series
HP Deskjet F4400 series
HP DJ F4500 series
HP Deskjet Ink Advantage K209a-z and K209g
HP Photosmart C4600 series
HP Photosmart C4700 series
HP Photosmart Premium Web C309n-s
HP Photosmart B109a-m series
HP Photosmart Wireless B109n-z
HP Photosmart Premium C309a-f
HP Photosmart Premium C309g-m
JonW
I work for HP

Hello jnapier99
The Officejet 6500 E709n does have a Windows 8 driver, however, it does not have a Windows 8 RT driver which is what the MS Surface tablet uses. This would explain the message you are receiving.
Source: Supported Printers for Windows 8
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Is there better way to do this? (Xml Pretty Print | node removing)

Hi all, I have been working at home on a small project to help my Java Jedi training. :-)
My app saves quotes from authors in an xml file.
I have a class [XmlRepository extends Thread] that holds control of an xml file to handle requests for Nodes.
When I remove a node I get a Line Space above the node that was removed, or better put my node gets replaced by a empty line.
Pretty print or correct Node removing.
part of my xml is like this (I have resumed it for readability):
    <entities forUser="ffffffff-ffff-ffff-ffff-ffffffffffff">
        <quotes/>
        <authors>
            <author id="f156c570-c676-4d69-9b15-ae7d859ff771" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Poe</lastNames>
                <firstNames>Edgar Allan</firstNames>
            </author>
            <author id="35dc0c5a-3813-4a10-af49-8d4ea1c2cee0" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Wilde</lastNames>
                <firstNames>Oscar</firstNames>
            </author>
            <author id="317f72ea-add6-4bd2-8c63-d8b373a830ab" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Christie</lastNames>
                <firstNames>Agatha</firstNames>
            </author>
            <author id="28047c89-b647-4c40-b6c7-677feaf2dfda" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Shakespeare</lastNames>
                <firstNames>William</firstNames>
            </author>
        </authors>
    </entities>If I remove A Node ( Edgar Allan Poe (1st in this case)) the resulting Xml when saved is like this (I have added the space indentation just as it is outputted by my code):
    <entities forUser="ffffffff-ffff-ffff-ffff-ffffffffffff">
        <quotes/>
            <author id="35dc0c5a-3813-4a10-af49-8d4ea1c2cee0" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Wilde</lastNames>
                <firstNames>Oscar</firstNames>
            </author>
            <author id="317f72ea-add6-4bd2-8c63-d8b373a830ab" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Christie</lastNames>
                <firstNames>Agatha</firstNames>
            </author>
            <author id="28047c89-b647-4c40-b6c7-677feaf2dfda" languageCode="en" regenerateAs="com.fdt.cognoscere.entities.sources.Author">
                <lastNames>Shakespeare</lastNames>
                <firstNames>William</firstNames>
            </author>
        </authors>
    </entities>this is how I initialize the XML DOM Handlers, and the method for removing a Node:
     * Initializes factory instances and member variables.
    private void initialize() {
        //obtain an instance of a documentFactory create a document documentBuilder
        this.documentFactory = DocumentBuilderFactory.newInstance();
        //Configure the documentFactory to be name-space aware and validate trough an xsd file
        this.documentFactory.setNamespaceAware(true);
        this.documentFactory.setValidating(true);
        this.documentFactory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
        try {
            //obtain an instance of an XPathFactory
            this.xpathFactory = XPathFactory.newInstance(XPathFactory.DEFAULT_OBJECT_MODEL_URI);
            //obtain an instance of the xpath evaluator object
            this.xpathEvaluator = this.xpathFactory.newXPath();
            //set namespace mapping configurations
            NamespaceContextMap namespaceMappings = new NamespaceContextMap();
            namespaceMappings.put("xml", "http://www.w3.org/XML/1998/namespace");
            namespaceMappings.put("xmlns", "http://www.w3.org/2000/xmlns/");
            namespaceMappings.put("xsd", "http://www.w3.org/2001/XMLSchema");
            namespaceMappings.put("xsi", "http://www.w3.org/2001/XMLSchema-instance");
            namespaceMappings.put(this.schemaNamespaceMapping, this.schemaNamespace);
            //add mappings
            this.xpathEvaluator.setNamespaceContext(namespaceMappings);
        } catch (XPathFactoryConfigurationException ex) {
            Logger.getLogger(XmlRepository.class.getName()).log(Level.SEVERE, null, ex);
        try {
            //obtain a trasformer factory to save the file
            this.transformerFactory = TransformerFactory.newInstance();
            this.transformerFactory.setAttribute("indent-number", 4);
            //obtain the transforme
            this.transformer = this.transformerFactory.newTransformer();
            //setup transformer
            this.transformer.setOutputProperty(OutputKeys.METHOD, "xml");
            this.transformer.setOutputProperty(OutputKeys.INDENT, "yes");
            this.transformer.setOutputProperty(OutputKeys.MEDIA_TYPE, "text");
            this.transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
        } catch (TransformerConfigurationException tcex) {
            Logger.getLogger(XmlRepository.class.getName()).log(Level.SEVERE, null, tcex);
     * Removes a node by evaluating the XPATH expression.
     * @param xpath A String instance with the XPATH expression representing the element to remove.
     * @throws com.fdt.cognoscere.storage.exceptions.UnableToRemoveException When an exception occurs that prevents the repository to execute the remove statement.
    public void removeNode(final String xpath) throws UnableToRemoveException {
        Node nodeToRemove = null;
        Node parentNode = null;
        //verify xpath
        if (xpath == null)
            throw new IllegalArgumentException("The xpath argument cannot be null.");
        //verify that the repository is loaded
        if (!this.loaded)
            throw new IllegalStateException("The XmlRepository faild to load properly and it is in an invalid state. It cannot perfom any operation.");
        try {
            //get the node to remove out of the xpath expression
            nodeToRemove = this.getNode(xpath);
            //throw an exception if no node was found to remove
            if (nodeToRemove == null)
                throw new UnableToFindException("The node element trying to be remove does not exist.");
            //obtain the parent node to remove its child
            parentNode = nodeToRemove.getParentNode();
            //remove the node from the parent node
            nodeToRemove = parentNode.removeChild(nodeToRemove);
        } catch.......removed to save space{
        } finally {
            //normalize document
            this.document.normalize();
    }Please tell me if I could do this better,
thanks,
f(t)

franciscodiaztrepat wrote:
When I remove a node I get a Line Space above the node that was removed, or better put my node gets replaced by a empty line.Replaced? No, there's already a new-line character after the node that was removed. And there was one before that node too. You didn't remove either of those, so after the removal there are two consecutive new-line characters. As you can see.
And no, trying to pretty-print the XML document won't remove any of those. It might add whitespace to make the document nicely indented, but it won't ever remove whitespace. If you want whitespace removed then you'll have to do it yourself.
For example, after you remove a node, also remove the node following it if it's a whitespace text node. Or something like that.

Smart forms- when i print a report it print main window data on same page

hi,
when i print a report it print main window data on same page .
i.e. if data is more then one page then it shows data page wise on computer screen but when i print it print all data on same only one page by over wrriting .
pl. help why it is happening
i create page in page i set next page and in second page give first page.
mukesh

mukesh,
what happened to this: smart form
close that please.
by the way,did you tried with what i suggested?
lets say mainwindow in 1st page.
copy the first page to second page.
now.
for 1st page: next page is : page2
for page2: next page is also : page2

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
a) HP printer with USB port only (no ethernet port) connected to Airport Express
b) No issue printing from Macs
Tests
1) Installed Bonjour 2 - does not find printer (now uninstalled)
2) Bonjour 3 is listed in programs but no way to access
3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
Regards
Richard
p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

This is possible, but not with Bonjour or any other fixes. It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

Print dialog window in report generation

Hi...
I would like to create a report from my database and send it to printer. Basicly i want to use something like print report.vi in labview examples. But the sample is print directly to the default printer, how can i display print dialog window so i can select the printer and set another properties.
Thank you

After some searching, I found this thread:
http://forums.ni.com/t5/LabVIEW/Printer-selection/td-p/23136
Some VIs were posted which look like they should do what you need.
Matt Lee
National Instruments
Applications Engineer

How to Print List to spool but skip the print parameter window?

Dear all,
I am coding a program for print list into spool.
But every times I run the program there must pop up a print parameter window, after I click the 'Continue' button,then the list print to spool.
Is there some way that I can just run the program and print to spool directly?
                           Thank you for your kindness help~~~
Message was edited by: jin yan

Hi,
If it is a report program then, use this code.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LP01'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT rep... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = 'X'
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

How to pretty printer of a code in enhance framework of a standard FM

Hi,
I have written a code in a <b>enhancement point of a standard Function Module</b>. But i am unable to pretty printer that portion of code. Doed any one have any idea how to do that??
Thanks & Regards,
Abhishek Sarkar

Hi,
Pritty printer gives a pritty view to your code, so that it can be easily readable.
You can set the functionality of pritty printer by doing some setting.
The path for setting is
Utilities>Setting>ABAP Editor-->Pritty Printer.
Thanks.

Pretty Print in windows 7

Similar Messages

Maybe you are looking for