Preupgrade script failure during DeveloperTools install(newbie alert!)

I'm trying to install DeveloperTools. I get the following error:
"Install Failed! The following install step failed: run preupgrade script for DeveloperTools. Contact the software manufacturer for assistance"
Can anyone help me?
Thanks

Hi baltwo,
Thanks for your reply. I was trying to install Dev Tools from the 10.5.1 cd.
I have not upgraded using the 10.5.8 COMBO update, but that does not seem to have helped. I have reposted my query to the Developer Forum.
My end goal is to get cvs to work with extssh - at the moment I seem to have cvs, but it won't work with extssh - I was hoping the Developer Tools would help this.

Similar Messages

Root.sh failure during Grid install - segmentation fault for clscfg

Hi anyone got any idea how to resolve the following error during execution of root.sh on second node of a RAC installation. I see there is a failure when clscfg -localadd is run - perhaps this is the start of the issue. I have no idea what this command is doing
Any help appreciated
Installing verison 11.2.0.2 on RHEL 5
ntpd was NOT running - I ignored this during the pre-reqs at the end of the runInstaller - perhaps this is the issue and i need to start fresh and make sure its running before running root.sh ?
root.sh....
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
Failure with signal 11 from command: 1 /opt/app/11.2.0/grid/bin/clscfg -localadd
OLR initialization - successful
Adding daemon to inittab
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9308: Loading installed ADVM/ACFS drivers.
ACFS-9321: Creating udev for ADVM/ACFS.
ACFS-9323: Creating module dependencies - this may take some time.
ACFS-9327: Verifying ADVM/ACFS devices.
ACFS-9309: ADVM/ACFS installation correctness verified.
CRS-2672: Attempting to start 'ora.mdnsd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.mdnsd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.gpnpd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'coden-ota-odc'
CRS-2672: Attempting to start 'ora.gipcd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.cssdmonitor' on 'coden-ota-odc' succeeded
CRS-2676: Start of 'ora.gipcd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'coden-ota-odc'
CRS-2672: Attempting to start 'ora.diskmon' on 'coden-ota-odc'
CRS-2676: Start of 'ora.diskmon' on 'coden-ota-odc' succeeded
CRS-2676: Start of 'ora.cssd' on 'coden-ota-odc' succeeded
Start of resource "ora.ctssd" failed
CRS-2672: Attempting to start 'ora.ctssd' on 'coden-ota-odc'
CRS-2674: Start of 'ora.ctssd' on 'coden-ota-odc' failed
CRS-4000: Command Start failed, or completed with errors.
Cluster Time Synchronisation Service start in exclusive mode failed at /opt/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6455.
/opt/app/11.2.0/grid/perl/bin/perl -I/opt/app/11.2.0/grid/perl/lib -I/opt/app/11.2.0/grid/crs/install /opt/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
I executed the /opt/app/11.2.0/grid/bin/clscfg to see what the result was and it returns a Segmentation Fault to std err
Edited by: 787789 on Nov 10, 2010 6:58 AM

Hi,
here is one document you can go for work around but it is on windows platform but similar error as you posted *CRS Installation Failed with "failed to configure Oracle Cluster Registry with CLSCFG, ret 9" [ID 851742.1]*
Thanks

Cannot install iTunes - failure to run preupgrade script

I get the error message 'failure to run preupgrade script for AppleMobileDevice' when I tried to install itunes. Have tried the steps at this link - http://support.apple.com/kb/HT1747 - but still no luck. Any ideas how I can resolve this?

Hey, thanks for your reply!
I'm trying to download iTunes 10.5. The software requirement says it needs OS X 10.5 or later so I should be able to right? (I'm on 10.5.8)

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

Cant upgrade itunesThe following install step failed: run preupgrade script

The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance

Try clicking on the Apple icon, upper left corner and going to "Forced Quit"
Click in iTunes and then do a Forced Quit.
Try install again. That worked for me.
Gary from Sandy

I keep getting this message when wanting to download latest itunes software update :The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance. what can i do to download?

The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance. what can i do to download software when the above message keeps popping up...not allowing me to download

I had the same problem this weekend. The iphone 4s needed Itunes10.5 to sync to her Asus Windows 7 Laptop. When I tried to download from the Apple website I got the error that the windows installer was missings files or something like that. I uninstalled itunes and tried again but that didn't work. Then I redownloaded itunes 10.3 just to have a working version in case I gave up. Then I found site that suggested I update Windows by going through the start menu and while doing that I found an update Apple itunes file.
Goto Start and type Widows Update in the seach window. Click on check for updates (I already was current with all updates but I suggest you download the updates if there are some available.
Goto start and this time just type update in the search window. Look for the Apple itunes update link and click on it. It found there were updates for itunes 10.5, Quick time, Safari, and Icloud. I checked all the updates except for Safari, since we don't use it (yet).
The install started then seemed to stall at one spot for ~3min but then completed successfully. I open itunes and had her synced with Outlook Contact, Email, Calender, and Notes in 5 minutes. I did already configure Outlook by going to tools and Trust Center.
I hope this works.

When I try to install an iTunes upgrade I get this message: The following install step failed: run preupgrade script for AppleMobileDevice Support.

When I try to install upgrades for itunes on my Mac, I get the following message: The following install step failed: run preupgrade script for AppleMobileDevice Support. When this happened before I trashed itunes and started over, but I don't want to have to do that everytime i install an upgrade.

C,
I ran into the same issue. Make sure your apple device in disconnected from the computer. It interrupts the itunes download. Disconnect and make sure itunes is closed, then try installing again. Remember that even though you close of itunes, it is often still running in the background. To make sure it's closed, click and hold the mouse on the itunes icon and select quit from the drop down menu. Then try installing the updated itunes.
Hope that helps.
SoEreal

The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance.

Just upgraded software. When system prompts to update itunes and in the middle of the system's attempt to complete the upgrade, the message, "The following install step failed: run preupgrade script for AppleMobileDeviceSupport. Contact the software manufacturer for assistance" appears.
I don't understand what "preupgrade" needs to be done.
Anyone else experience this?
Suggestions?

-= Pre Upgrade Script Error with iTunes =-
Do a general web search and you will discover there are many answers, none definitive.
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier - http://support.apple.com/kb/ht1747
scarier:
https://discussions.apple.com/message/10464515#10464515

The following install step failed: run preupgrade script for AirPortUtility. I have been getting this error whenever I try to do a software update on anything.

Each time I try to run a software update... I am getting these error messages so I am never able to upate.
The following install step failed: run preupgrade script for AirPortUtility

=Pre Upgrade Script Error with iTunes=
Do a general web search and you will discover there are many answers, none definitive.
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier - http://support.apple.com/kb/ht1747
scarier:
https://discussions.apple.com/message/10464515#10464515

Script error during install

On installing Flash Player (n.n.n.179) on Windows XP, I got the following error twice during the install:
The install did actually finish, but I had different version numbers for the ActiveX and the browser plugin versions. I uninstalled both of the Flash Player versions, and tried to re-install it. However, the script error comes up again, even when cleanly installing it (and it didn't re-install the ActiveX version at all). I'm wondering if it properly installed the plugin version, and I know it didn't install the ActiveX version - I looked in Control Panel to verify this. What's going on, and how do I fix it?

I don't know, I have never seen this error. Try the offline installer(s):
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Failure of flar install on X2100 M1

See this error during flar install. Flar created on X2200 M2, install carried out on X2100 M1. Any ideas? The original install was Entire rather than Entire+OEM but I don't think the problem seems caused by a disparity in peripheral devices.
Error: ./cleanup-scn-base: syntax error at line 34: `;;' unexpected
Error:
Error: ERROR: Error while processing custom script - cd /tmp/flash_tmp/postdeployment;./cleanup-scn-base
Error:
Error: ERROR: Postdeployment processing failure
Error:
Error: ERROR: Flash installation failed
Pfinstall failed. Exit stat= java.lang.UNIXProcess@1c21ece 2I've examined the script at /usr/lib/scn/bin/cleanup-scn-base and cannot see a cause for the 'syntax error'. I suppose it could be corrupted in the flar...?
This occurs after Verifying disk configuration
Verifying space allocation
Configuring disk (c1d0)
- Creating Fdisk partition table ...
Creating and checking UFS file systems ...
Beginning Flash archive processing
Extracting archive: ...
Extraction completeMessage was edited by:
qu1j0t3

How bizarre. I suspect this is as as a result of the hard disk replacement (following loss of data) which has created a catalogue of problems for me (including even more lost data). Don't know whether due to my incompetence or the company that replaced the disk.
I can't access the download (PSE8) to the former administrator as the new administrator.....

Run preupgrade script for AppleMobileDeviceSupport

I try to upload itune but i receive that message: run preupgrade script for AppleMobileDeviceSupport
Somebody know about it?

Hello, only "fix" I've seen so far relating to "preupgrade"" is resetting the Router/Modem...
I had this error this morning trying to update iTunes to 10.0.1 - in my instance I reset my wireless router then tried again and it worked and installed, seemed that an interruption occurred during the connection. Have you tried again since?
Luke
https://discussions.apple.com/thread/2515630?start=0&tstart=0

After Effects can't continue: unexpected failure during application startup

Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
System log:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
            Call location:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
Mylenium

Ora-01031: Insufficient Privileges error during 10g install on Suse 9.1

I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
I would really appreciate any help that any of you could provide. Thank you so much in advance.
-Daniel

I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
Thank you for helping me with this!

Ora-01031: Insufficient Privileges during 10g install on Suse 9.1

I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
I would really appreciate any help that any of you could provide. Thank you so much in advance.
-Daniel

I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
Thank you for helping me with this!

Preupgrade script failure during DeveloperTools install(newbie alert!)

Similar Messages

Maybe you are looking for