Preuut and postuut sequences are not executing when run using UI. They run when using the sequence editor.
I am using TestStand 3.5 and LabVIEW 8 in a Windows XP environment.
I have a sequence that runs properly when run from the sequence editor. I have made a few minor mods to the simple Operator Interface that ships with TestStand. When I run my sequence using the modified Operator Interface, the PreUUT and PostUUT sequences do not execute. Only the main sequence executes. This also happens when I run the demo sequences that ship with TestStand.
What am I missing?
Hi,
It sound like you are executing the sequences without the process model, do you get a report at the end of the execution?
What are these minor mods you have done?
Regards
Ray Farmer
Regards
Ray Farmer
Similar Messages
-
why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.
why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.
-
My brother gave me his macbook pro and I'm having trouble getting past the start up page that asks for my my name and password. I have an apple id and password but these don't work nor does me typing my actual name and the same password. I've rung apple twice and the first person said I had to reset my uusername account and told me I could do so by visiting the support part of the apple website using the link he gave me. The information tells me how to do this but I have to have the computer up and running to reset/change the account username and password. So no joy. Second time I spoke with a lady who told me the name and password should be the same as the one my brother used when he had the computer but having entered the name and password he gave me it still doesn't work. I've tried all the different name types of my name e.g. full name, no spaces, capitals and no capitals etc but every time I click on the right pointing arrow thing or press the enter button the password does a quiver/shake thing and nothing happens. My bro says he has a relatively new lion operating system. I haven't a clue what to do as I'm new to using apple computers and I've spent ages looking through the support section with no success in finding the solution. Any help/advise would be much appreciated. Ta
Resetting User Password in Lion and Mountain Lion
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton -
Af:commandMenuItem action and actionListener are not executing
Hello all!
I use JDeveloper Studio Edition Version 11.1.1.2.0. Here's the problem. I have a popup menu like this
<af:popup id="someMenu" animate="default">
<af:menu id="pt_m1">
<af:forEach var="item" items="#{ContextMenuHelperBean.availableUserRoles}">
<af:commandMenuItem text="#{item.roleName}"
action="#{ContextMenuHelperBean.changeUserRole_Action}"
actionListener="#{ContextMenuHelperBean.changeUserRole_ActionListener}"
immediate="true"
partialSubmit="false"
id="pt_cmi1" rendered="true">
<f:attribute name="userRole" value="#{item}"/>
</af:commandMenuItem>
</af:forEach>
</af:menu>
</af:popup>
The problem is that action and actionListener are not executing, when the menu item is selected (but the page is reloaded with no changes). ContextMenuHelperBean has a "session" scope set in adfc-config.xml. What can be wrong with this?Now I've encountered a new kind of error. I create a menu in a managed bean like this:
In JSPX
<f:view beforePhase="#{RolesMenuSupportBean.createMenus}">
<af:popup id="cxtMenu" animate="default">
<af:menu id="pt_m1"
binding="#{RolesMenuSupportBean.rolesMenu}">
</af:menu>
</af:popup>In com\cs\webb2\view\utils\menu\RolesMenuSupport.java
public void createMenus(PhaseEvent phaseEvent) {
List<IUserRole> rolesList = getAvailableUserRoles();
for (IUserRole role: rolesList) {
Boolean hasItem = false;
for (Iterator iter = rolesMenu.getChildren().iterator(); iter.hasNext(); ) {
RichCommandMenuItem item = (RichCommandMenuItem) iter.next();
if (!hasItem)
hasItem = item.getText().equalsIgnoreCase(role.getRoleName());
if (!hasItem) {
RichCommandMenuItem newItem = new RichCommandMenuItem();
newItem.getAttributes().put("userRole", role);
newItem.setText(role.getRoleName());
newItem.setId(ITEM_ID);
newItem.setActionExpression(getActionExpression("#{RolesMenuSupportBean.changeUserRole_Action}"));
newItem.addActionListener(getExpressionActionListener("#{RolesMenuSupportBean.changeUserRole_ActionListener}"));
rolesMenu.getChildren().add(newItem);
} The menu is created successfully, but when I click on any item, I get an exception
<b>javax.servlet.ServletException: Method not found: com.cs.webb2.view.utils.menu.RolesMenuSupport@d4702.changeUserRole_Action(void)</b>
But of course I have such a method in my com.cs.webb2.view.utils.menu.RolesMenuSupport:
In com\cs\webb2\view\utils\menu\RolesMenuSupport.java
public String changeUserRole_Action()
System.out.println("Action!");
// no code yet
return "adfMenu_Main";
}And there <b>is</b> a managed bean named RolesMenuSupportBean, which is associated with class com.cs.webb2.view.utils.menu.RolesMenuSupport.
Can anyone tell me, what can be wrong? -
I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?
Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option
-
I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?
This is quite odd. I wonder if you could try something for me on EACH computer.
Use Help > About Adobe Acrobat DC.
At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
On each of the two machines, what does it say? (I think something odd has happened) -
i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!
Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian -
My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?
Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.
-
Inbound Queue blocked: Parallel and alternative sequences are not supported
Hi,
Just now, I checked the Inbound Queue in SCM system through SMQ2 and found which was blocked by error message "Parallel and alternative sequences are not supported". Could you please tell me what does it mean? How to fix it?
Thanks,
Quanyin SuHi Quanyin Su,
Parallel and Alternative sequences are used in routing.
I believe you are trying to CIF PPM/PDS from ECC to APO and you are getting this queue stuck at inbound of APO.
Both the alternative and parallel sequences are supported in APO.
Alternative sequence is used as alternative modes in APO.
I can think of this as a master data issue.
At least one of your work center used in either of the sequences is not available in APO or is not APO relevant.
Could you please check your master data such as all the work centers used and make sure your parallel and alternative sequences are consistent.
Once you made sure that master is available in ECC, you can CIF it to APO by using CURTO_CREATE transaction in ECC.
Please see below link for Routing and its usage in APO:
http://help.sap.com/saphelp_apo/helpdata/en/99/ed3a981d0f11d5b3fc0050dadf0791/content.htm
You also need to activate a BADI in order to sent alternative sequences to APO.
Below thread has all the details regarding this.
Re: /SAPAPO/CURTO 103 : Mode .. is not assigned to an activity
Regards,
Abhay Kapase
Edited by: AbhayKapase on Aug 5, 2011 2:24 PM -
I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???
I can see the block (flashes) and the buttons are no longer usable.
I have Empted Cache but doesn't seem to help.From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?
Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far... -
Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.
Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?
Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!
-
How to delete video from iTunes library? del and shift+del are not working - no any reaction
how to delete video from iTunes library? del and shift+del are not working - no any reaction.
seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library. -
External and internal mikes are not automatically switching over either recording or on voice calls
My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right
Maybe you are looking for
-
Financial Reporting batch runs without being scheduled when services restart
Hi, hopefully someone may have come across this before: I set up a scheduled batch yesterday (workspace 11.1.1.1.3) pointing at a batch of 2 large reports. As part of the testing I ran it at a scheduled time during the day and it worked perfectly. H
-
Japanese font "MS PGothic" not showing properly in linux machine
Hi, I am using this font "MS PGothic" in my swings application to display Japanese font, But in SOME of the linux machines, it is not displayed properly linux os : Red Hat linux Enterprise edition 5.0. Do I need to install some packages for MS PGothi
-
Hi- I know this one is probably a "user-error".... but does anyone know how to execute a search for a string in a site using CFEclipse's Search feature? I know I can be slow, but for the life of me I'm not seeing obvious search results.... In the RDS
-
Hi Expert , Can you please confirm, is it possible to use filter in goldengate for initial load using gg extract, for example , we have two table in source database for example Acct and acc_txt Desc Acct Name Null
-
Hi Experts, In ME21n Transaction in item level Region field should be mandatory, with out give the region doesn't save. if i save with out region it show the error message.Please give me exact badi name.