Prevent a BSEG-field from changing

Hello,
How could I prevent a particular field from changing for an FI document?
I need the field to be fulfilled but, afterwards, its information should not be changed any more.
Kind regards,

Hi, Nagendra
I have just noticed it is not a BSEG-field but a COBL-field. Despite this, I have checked whether it is exluded in GB01 table and I found that it is not. However, COBL structure does not appear in the list of table fields for prerequisites and checks in validation, so I cannot use it.
Although it was available, what kind of prerequisite or check should I carry out?
Regards,

Similar Messages

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?

Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

Is there a way to prevent an end-user from changing their own password?

All you guru's out there, I need your help. Is there a way to prevent an end-user from changing their own password? Is there a function or procedure I can create or what?

In this case, you do not want someone (whoever they are DBA etc) to connect as that
particuler user to change the password.Yes, but I wouldn't expect the users to[i] know that password. The connnect would be handled automatically, behind the scenes.
The clear implication of the OP's question and response was that users would not be allowed to change their own passwords. I'm guessing this is in response to a policy that says users mustn't have simple passwords like 123abc or mom. In such a scenario a better approach would be to apply regexp to a user's password to ensure it contains a mix of letters, numbers, punctuation, etc to achieve the desired level of complexity.
So questions, should not be regarded as daft Agreed, but the same is unfortunately not always true of business decisions. As the OP has told us not to ask we cannot know why they want to do this. Personally, I think a user's individual password should always be their responsibility; anything else strikes me as insecure. YMMV.
Cheers, APC

How to Prevent SharePoint Farm Password from Changing

I have been trying to stop the SP farm account, spfarm, from password changing. SharePoint Central Administration is used and I go to Central Security -> Configure managed accounts. I set spfarm not to change but it makes no difference.
It still changes. When that happens it screws up the SharePoint VSS Writer service account and backups fail (the password synch script has to run to fix). When the setting in SP CA is changed to allow password changes, the SharePoint VSS Writer
service account still has a problem and backups fail.
Additionally, I have run the two below scripts when necessary to try to correct the problem and it works until the password changes again. It seems as though the password changes whenever the server restarts or at least once every week or so.
Can anyone help me with this? I don't care if the password changes on a schedule as long as it doesn't cause the SharePoint VSS Writer service to fail during backup.
Repair-SPManagedAccountDeployment (This checks synch of passwords)
set-spmanagedAccount -UseExistingPassword
This is on a Windows Small Business Server 2011, which runs SharePoint 2010.
Tony

Hi Tony,
In SBS 2011, use 3 different accounts to run Windows SharePoint Foundation. The accounts are spfarm (SharePoint
Farm Account), spsearch, and spwebapp. For security reasons the passwords on these accounts are periodically reset. The password for spfarm is reset every 7 days that the Windows SBS Manager service is running.
à
How to Prevent SharePoint Farm Password from Changing
I will suggest that set the password expiry to be longer (such as: a month or 365 days or even more) and apply
it. Maybe a workaround.
By the way, the Windows SBS Manager service manages the spfarm account. This spfarm account will be found under
MyBusiness-> Users-> SBS Users in ADUC. If you navigate to the spfarm account in ADUC and open the Properties of it, then select
“Password never expires” under Account options in Account tab. Please check if this can help you to achieve target.
Hope this helps.
Best regards,
Justin Gu

Prevent Mac OS X from changing resolution

I have a Mac Mini connected to my Sony 46xbr8 HDTV, and every time I turn the TV off, Mac OS X changes screen resolution to what seems to be arbitrary one. Just now it switched to 1280x1024, screwed all windows up along the way, and even if I connect to it via a Remote Desktop and change the resolution back to 1920x1080 - the system menu remains 1280 pixels wide, and the rest of the space where the menu should be is empty.
Is there a way to prevent Mac OS X from changing the resolution (other than leaving my TV on at all times)?

So, is there no other way to prevent Mac OS X from changing resolutions, when the TV is off??? It wouldn't have been a problem, if it didn't change all open window sizes, but every time I turn on the TV - all windows become tiny...
I've installed Windows 7 in BootCamp on the Mac Mini, and God, it works SO MUCH BETTER than Apple's own OS on their own computer!!! It does indeed look like now Windows 7 "just works", and Apple's Mac OS X - "just doesn't"... So far it looks like Apple is losing it...

Blocked fields from change JavaScript to configure email submission of PDF forms

Hi,
I created interactive form with button to send by mail, by inserting the javascript code.
It works properly, but I need the PDF arrivals with interactive fields blocked from change by those who receive it attached to the email.
Let me explain, I need the form to send offers via e-mail to customers, but when I send the customer who receives the email should not change it.
How is it possbile to do this?
Thanks
Nat

Check if you have any hidden fields on the form which are required..
If not, some how the disabled may not be working as expected..
If you still have issues, you can send your form to [email protected] so I can have a look at it..
Thanks
Srini

How to make the Business Area field from Change Mod to Display Mode in AS02

Hi Gurus,
I created a Customized T-code YAS02 for making the Business Area in Display mode with the help of SHD0.
But my client wants to do the same in standard T-code of AS02 and they don't like to use the customized T-code.
Kindly advise to make the Business Area from Change Mode to Display Mode in AS02.
Thanks in advance...
regs / Devi Aparna

Hi Devi,
check the following customization
asset accounting -> Integration with the General Ledger> Additional Account Assignment Objects-> Activate Account Assignment Objects---
Regards,
Ranjith

Is there a way to prevent the "task id" from changing automatically when a task is moved or inserted?

When moving a task in Project 2010 I've found task IDs also change. This is not the desired result. If a task is moved for whatever reason the task ID should not change. It should be consistent to the task. For example, I've created
a new project with five tasks as shown on the left below.
I've numbered the tasks to coincide with the task ID as originally created. If I move Task 4 to be after Task 1 the moved task and all subsequent tasks are renumbered as shown on the right below.
This is not the desired result. The expectation is the task ID is unique to the task when the task is created. It should never change after the fact. I view the task ID as the identity field for the task. In database terms this means
it NEVER EVER arbitrarily changes.
A similar problem occurs if a task is inserted between two tasks. If I insert task 6 after task 2 the task IDs are renumbered as shown.
Again, the task ID should never have been arbitrarily changed. This creates a referencing problem because task 6 should have had the next available higher task ID which should have been 6 and all the tasks after task 6 would not have been renumbered.
The only work around to this behavior is to create a custom number field called "Task ID" and manually assign numbers to each task. This makes referencing the tasks easy when communicating with team members. Using the built-in task
id as a reference risks the task ID being lost at any point and confusion for team members.
Is there a way to turn-off task ID renumbering when a task is moved or inserted?
Ideally any inserted task should be the next higher available task ID.
Thanks

Hi,
not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
Sorry, if there are now 2 answers.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Restrict the quantity fields from changing in ME54N during PR release

Hi All,
I have created a workflow for purchase requisition release strategy . Apporver's will login into ME54N transcation from the attachment in email and provide Release/Reject on PR . At that when any approver login to ME54N the item detials are in change mode so that user can able change quantity or other fields in the ME54N Transaction . So how to restrict the Approvers for not changing any quantity fields on the PR when it is being released .
Thanks and regards,
Dilip Kumar

Hi-
I do agree with all other comments.
Also discuss with you functional consultant, say if any of the field which determines release strategy is changed by the approver, then end the current workflow instance and start the new workflow instance based on new release strategy (obviously new set of approevrs)
This is possible as SAP will trigger the corresponding event, if any of the field which determines release strategy is changed, (if release stratgey is configured properly).
You need to build the workflow in such a way, that if this event occurs, then end the current workflow instance and start the new workflow instance.
Vinoth

How to prevent 3rd party applications from changing FF settings (e.g. homepage)?

On Windows 7 (Firefox 15 Beta) i cancelled installation of an unwanted application, but it changed the firefox homepage and added a search engine. How can i prevent this from happening in the future - is there a firefox setting or are this changes entirely managed by windows?

For your current problem, you can use [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ https://addons.mozilla.org/en-US/firefox/addon/searchreset/] to revert these settings.
Unfortunately there isn't a real way to prevent this from happen. You can, when installing programs, make sure you read through every setting, and not install toolbars, search engines, etc. However, if the program is malicious they may not give you an options and will just install it anyway.

How to remove Fields from Change Office & communication Data..

Hi,
In ESS->Emp Search -->Change office and communication Data..I have to remove a field "License Plate No" as we are not using it..
How to do it..
I have Netweaver studio installed in my pc but i dont know how to use it..
could any one tell me the steps to do the above task in Netweaver Studio..or there is any other method that can be done..
It would be great help for me..
Thanks & Regards,
Mahesh.M.R

Hi Ashutosh,
Thanks for the reply..
I am using web Dynpro Version..ie ERP 2004 ESS 60.2.
Appreciate if you can provide me the solution..
Thanks & Regards,
Mahesh.M.R

How to prevent a number field from getting summed?

I want to display the # of clients per a certain ID number. (In order to show the duplicate records by setting a filter in the # of clients field). However, this works if the ID number is a text field... but it doesn't work if the ID number is a metric of client... or number. It gets summed up, I get the total, and the % of clients turns to be 1.
Any ideas?
Thanks

Example:
I have 3 clients:
Column A
55
55
44
21
I want the following output:
55 | 2
I get the desired result by adding a second column (# of clients) and creating a filter to get results only if the value is > 2.
The problem is when "Column A" is a number field. If it is a number field, I get total sum of the records (55+55+44+21) and a value of "1" if I add the # of clients column.
Is it clearer now? ideas?

Prevent priviledge 15 account from changing enable account password

Hi all. I would like to check which priviledge level i should assign a network admin which allows him to configure my firewall at all aspects except changing the password the default enabled account. Thks in advance.

Create a custom level (ie 14 would work) for him and remove the appropriate commands in AAA.
Hope that helps.

Prevent from changing account picture

Good day!
Is it possible to prevent windows domain users from changing their account picture?

Most schools are assigned an Apple representative, who should be able to supply you with the proper tools/software to do so.

Preventing local admin from changing root password

Is it possible to prevent a local admin from changing the root password? I would like to set up a computer so that the user has admin rights, but cannot change the root password via a terminal shell to gain root access.

I can't provide you with details, but I'm sure that all you need to do is to edit the sudoers file. It needs to be edited with <visudo> when logged in as root in a Terminal. The location is </private/etc/sudoers>, but you don't need to know that when using <visudo>. From a first look I'd suppose you only have to uncomment the %admin line, but better get some more information. I never did this myself.

Prevent a BSEG-field from changing

Similar Messages

Maybe you are looking for