Prevent ftp sender adapter from tranfering files from subdirectories

I have a scenario with a ftp sender adapter. In the configuration of the ftp sender adapter I have defined a base directory "/dir" and a file pattern "*". The directory /dir as a subdirectory /dir/subdir. Now the ftp adapter transfers also files from this directory. But I don't want that. Any solution?

Hi,
I am not sure whether it is made so intentionally be SAP. However, if you wish to resolve this issue, you can specify a wild card for file names, such as the file extension (for example, *.txt).
Hope this helps,
Bhanu

Similar Messages

FTP sender adapter archives empty files

Hi.
I have a strange problem with the ftp sender adapter.
I receive my file without problems, and the scenario works as it should.
The problem is with the archiving of my processed file.
It writes the file fine to the path specified, but it is empty (user has full file permissions)
The ftp adapter uses content conversion, and I have seen threads in the forum that tells about simular errors. But I have found no solution.
Hope someone can help here.
Regards...
Peter

File Content Conversion is usually associated with Receiver File/FTP adapters
and Archiving the source file is an option at the Sender File/FTP Adapter.
No, content conversion is used both in sender and receiver file/FTP adapters.
In my case, it is in a sender adapter!
I'm not sure what you mean when you said "The ftp adapter uses content conversion,..."
The sender FTP adapter content converts a flat file to XML format!
Can you let us know the details of your scenario?
Like who / what is the sender and who/what is the receiver system?
The scenario looks like this: "FTP -> XI -> RFC", but as mentioned before, the scenario works fine, the problem is in the FTP sender adapter that fails to save the archive file.
If I try to use the file/FTP sender adapter in "file mode", with the same parameters, the archive file is written just fine!
Regards...
Peter

HTTPs sender adapter to pick file from a external HTTP file location

HI gurus
Please see the problem here. I need know hoe to configure the Sender HTTP adapter.
My Scenario-
A Flat file (non-xml but structured) sitting on an external https enabled web server. I need XI to go out and get this file on a regular basis (which will then be processed laterby the business person)
Thanks
VL

Hi,
The FTP Adapter will do the job for you. Just create a File Communication Channel and change Transport Protocol to FTP. Since you mentioned that the file is non-xml, in the Message Protocol, choose, File Content Conversion.
Here are some blogs that will help you:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
FYI.. HTTP Sender adapter is not required to be configured because a HTTP request will directly come to the ABAP Engine
Regards,
Balaji.M

FTP Sender Adapter, Empty Archive Files

Hi,
When I retrieve files using a FTP sender Communication Channel and I checked the Archive check box (including an existing directory), the file is archived but it does not have any content. It is completely empty.
The original file contains data and is processed correctly. The original file is a csv and I use FCC to convert it to XML.
Anybody any suggestions?
Ron

Hi,
The scenario is FTP --> IDOC scenario.
The config is as follows: (not mentioned = not used)
Source:
Source Directory: /Out
Filename    File*.csv
FTP Connection:
Server: a.b.nl
Port: 21
Dataconnection: Passive
Connection Security: None
Username: user
Password: pass
Connect mode: Per File Transfer
Transfer mode: Binary
Processing:
Quality of Service: Exactly once
Poll Interval: 60 secs
Processing Mode: Archive
Add Timestamp: checked
Archive directory : /usr/sap/Interfaces/
File Type: Text
FCC:
Documentname: File
Recordset Name: Lines
Recordset Structure: Line,*
Recordset Sequence: Ascending
Key field type: String (Case sensitive)
Line.fieldSeparator     ;
Line.endSeparator     nl
Line.fieldNames         VBELN, POSNR, RREL
Best regards
Ron

FTP Sender Adapter - File Order

Hi,
can somebody tell me, in which order files are being read via the ftp sender adapter when using wildcards for the filename ?
I need to process the files sorted by name. Is there any possibility to get this done ?
BR,
Martin

hi Martin,
Check this forum discussion.
Re: FTP Sender Adapter - Processing Sequence
and check out Praveen reply regarding your query
regards
Ramesh P

Specifying Additional Files in an FTP Sender Adapter

Hi,
Has anyone worked out how to specify additional files in a File/FTP Sender Adapter using the FTP transport protocol? This functionality comes 'standard' in the File/FTP Sender Adapter using NFS transport protocol so that additional files can been included as attachments, however, it doesn't seem to be available when trying to use the FTP protocol.
Thanks in advance.
Regards,
Reuben.

Yes this is available in only NFS mode check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/frameset.htm
Thanks!

FTP-Sender Adapter ignores files with "known filenames"

Hello experts,
the scenario is FTP -> XI -> IDOC and we have problems with the polling of the files. In communication channel monitoring everything is working fine, but in the FTP folder some files are ignored, although the communication channel is set up for all *.txt-files.
My question is, is it possible that the FTP sender adapter ignores files, if it already has processed a file with the same filename? After renaming the files they all were picked up and archived into another folder. How can I configure the communication channel to pick up ALL *.txt-files in the out-folder?
Best regards
David

Hi David,
What I have observed is, XI always reads files in a certain order (possibly alphabetical or reverse alphabetical). If it finds a file in the source directory that already exists in the archive directory, it will not attempt to read/process the next file (even if the next filename is completely new).
So, if any of the files in the source directory exist in the archive directory, there is a possibility that certain files may get processed and certain wont.
Make sure that none of the files that you put in source directory exist in the archive directory (i.e. all the files are new) and see the output. Let me know if this helps.
PS: I used FTP protocol
Regards,
Riyaz

How to Call HTTP Sender Adapter of Other Scenar from HTTP Receiver Adapter?

Hi,
I have a requirement to call HTTP Sender Adapter of Other Scenario from HTTP Receiver Adapter?
or
call SOAP Sender Adapter of Other Scenario from SOAP Receiver Adapter?
i.e
SOME SENDER - > PI - > HTTP Receiver - > calling -> HTTP Sender -> PI -> SOME RECEIVER
SOME SENDER - > PI - > SOAP Receiver - > calling -> SOAP Sender -> PI -> SOME RECEIVER
if any one can provide me the screen shot for those SOAP / HTTP Sender or Receiver ADAPTER.
or Point me to Some article with Screenshots .
That would be appreciated with Point.
Regards
PS.

Solved . .

FTP sender adapter wait sometime before processing a message

Hi,
I want my FTP sender adapter to wait sometime before processing a message. This is needed in my case since the receiver of the message cannot consume message in, say two seconds, so I would like to configure a "time to wait before processing message" in PI since PI processes all of the files in folder without waiting another poll interval time if more than one exist.
Is this possible in PI 7.0 sp16?
Regards,

HI Tarik
BPM is the solution for this problem. If you are not willing to use BPM other solutions are Adapter module and Scripts
You can write adapter module and use the threads mechanism. Thread.sleep can help you achieve this but you need to set this properly.
Another method is Unix script. Let your actual directory be Dir1 and poll PI to Dir2. Use the script to write files from Dir1 to Dir2 one by one and with time gap. This will work for you.
If you have PI system on Windows i prefer to go with Adapter module.
Thanks
Gaurav

Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Hi All,
We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
send it to destination.
Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
And, we are getting an Access Denied error from Dynamic send port.
Error Description :
The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
Details: Access is denied.
Any Immediate solutions/suggestions are appreciated...Thanks.
Anand

The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
Regards, Ajeet Kumar MCTS Biztalk Server

FTP Sender Adapter - Processing Sequence

Does anybody know what the processing sequence of files is when I using a ftp sender adapter? I can only determine this if I use a file sender adapter (NFS).

Hi,
in sender file ( FTP ) adapter:
when qos :eoio
the sequence the msg processess will be in ascending alphabetical order.
ex: if i have 10 files in a folder
as per the my requirement all the 10 files are picked up at the same time, then
the files will be arranged in queue specified in ascending alphabetical order and processed in the same order.
but, when i use QOS: EO
the same thing is going to happen right!!
picks all the files , processess in ascending alphabetical order to xi..
then what is the use of queue here in eoio???
on the other hand,
in sender file ( NFS ) adapter:
file will be processed based on the processing sequence( either by date or time ).
so both EO and EOIO use the processing sequence... then wat is the work of queue here in EOIO MODE.. any way they are processed according to the proccessing sequence parameter.. ???
Please reply..

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

FTP Sender Adapter for OpenVMS

Hi,
did anyone of you use a FTP Sender Adapter on an OpenVMS System?
If I connect via FTP Client (Dos, Unix Shell or Filezilla) this works fine so far but with XI I receive the following error message:
Error occurred while connecting to the FTP server "server:21": java.net.SocketException: Connection timed out:could be due to invalid address
BR Markus

Hi,
Check your FTP server Address and the port number. If you are using SSL / TLS then the port numbers will change.
<b>Cheers,
*RAJ*</b>

File Adapter - Reading 2 files from sender and one file to receiver

All - I am looking for a best solution for reading two files from sender and generating one file to the receiver.
Here is the scenario
Sender file s - A is a master file. B is a detail file; B will have a one to many records for each record of File A.. that is the relation ship between 2 files.. I am looking for a better solution to
Example
Input:
File A will have a record like "summary1 ABC 1234"
File B will have a record like "Detailfor Summary1 CDF 8679"
Output:
File C shall have a record "consolidatedofSummary&Detail ABC 1234 8679"
1) read records of master row and detail row from these 2 files
2) do the mapping to the receiver output format which it is creating for records with some harcoded values and based on the values from master and detail rows of sender file
if I can accomblish reading sender files and do the mapping to the receiver , assume that mapping to the receiver format would not be cumbersome.
please help me...
Thanks

Hi Gopal,
Ur approach to the interface is perfect.... Go ahead.
For selecting multiple files in source use Advanced Selection for files.. and specify the directory paths and also the file name shema...
This will fetch the 2 files into the integration engine... then u map the 2 source files to one target file(2:1 mapping).
Specify accordingly the receiver side FCC and test it end to end...
If u face any prblm post here... some1 will help u out..
Babu

Can I use the File Adapter to transfer files from/to my own PC

Hello,
Would it be possible to set tu the file adapter to send or receive files from my own PC's file system?
For example I would like to transfer a file from my PC to PI instead of using PI's file system?
Can I do that?
Thanks
Marcelo

If your PC has Windows-based system, SAP XI is Unix-based, you have a problem: Unix can't connect to UNC-path - Unix doesn't understand path like this "
mywindowspc\myfilesharefolder\", and Windows can't mount unix-drives. There are has a tool that can mount Windows UNC-file-share on NTFS like dirive UnixFS - but this tool is not freeware and has a problem when you switch off your PC without unmounting your Windows-dirives on Unix system. You can use a SAMBA, but Admins doesn't like to install this to Unix...
So, if you want to use a File Adapter you can set only FTP path, create FTP-site on your own PC, and so on...
Another way to send information from/to your own PC is "Plain J2SE Adapter Engine". This is a standalone part of SAP XI, you install it on your PC, configures URL of XI pipline, sets local folders to transfer from/to your PC, masks and types of your files, time to sending, any rules and DOS-commands for "before/after sending and receiving" and so on...
In case of sending files from PC to XI, files transforms to XI-payload inside this Adapter Engine and then goes like XI-message to pipeline... When you send it back, payloads come to this Adapter Engine and transform to files on your PC.
I used this Plain J2SE AE on my working notebook for checking sending messages to many different XI Systems.
For more info: http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/content.htm
Regards.

Prevent ftp sender adapter from tranfering files from subdirectories

Similar Messages

Maybe you are looking for