Prevent logging for a particular interface ?

Hi Guys,
In our xi landscape we have one interface with the credit card data and it is synchronus and we have other interfaces also which are synchronus. Is it possible to prevent the logging for particular interface ?
any help would be really appreciated
Thanks,
Srini

Hi,
As per SP13 Release Document it is possible to restrict access of certain users, for this go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/ff/42ad423442c611e10000000a1550b0/content.htm
Reward points if helpful******
Thanks,
Madhu

Similar Messages

  • Configuring syslog and generating logs for a particular period.

    Hi...
    I have configured syslog server and the loggin enabled on ASA device... I want to generate the complete logs for a particular period of time. How can I generate this report.. Please help me

    Hello,
    I have an idea how it might work, but it is not certainly the best solution so if you will not find any other, this might work for you.
    Enable sending logs to syslog server:
    logging source-interface loopback    
    logging
    configure EEM script to run "show log" periodicaly:
    event manager applet test
    event timer watchdog name test_name time 60 ! in seconds -> every minute
    action 1.0 cli command "show log"
    Best Regards
    Please rate all helpful posts and close solved questions

  • Prevent "no" Under a Particular Interface

    I want to figure out how I can use EEM to prevent all users from running a "no" command on a particular interface.
    Normally I would right something like:
    event manager applet PREVENT-POLICY-MAP-REMOVAL
    event cli pattern "no *" sync no skip yes
    action 1.0 syslog msg "DO NOT REMOVE A SERVICE POLICIES FROM THIS PORT"
    However, this would prevent the command under all configuration modes.  I just want the EEM script to protect a single ethernet port.  Without using AAA authorization (local privileges) or TACACS authorization, how could I do this?

    Try this applet to block "no commands" under the interface.
    event manager applet cmd
     event cli pattern "no *" mode "interface" enter
     action 1.0 syslog msg "NO Commands not allowed under interface mode"
     action 2.0 set _exit_status "0"

  • Deactivate logs for determinate services (interfaces)

    Hi,
    It´s possible to deactivate the logs for some interfaces and to have the rest active?
    Regards.

    Hi,
    I find this http://help.sap.com/saphelp_nw04/helpdata/en/41/b715015ffc11d5b3ea0050da403d6a/content.htm
    It possible to configure in Integration Engine menu the persistence of message.
    This solution is geneal for all interfaces, no for determinated messages :*(
    Anyone knows any way to do this?
    Message was edited by:
            Iñaki Vila

  • How to save change log for a particular standard table in ZTABLE

    Hi Experts,
    Wouldlike to make one ztable in R3 which should  record changes made( say particualr field)  in standard SAP DB table ( say TXPDAT). I  think that there has to beway to do it.
    Could you please share the way to achieve it?
    Will appreciate a quick reply.
    Thank you
    Best Regards

    Hi,
    or else do like this...
    In order to maintain the log changes the main pre reuisite is to checkmark the checkbox in dataelement of table filed.
    To do this...
    goto transaction SE11>enter ur table name>cleck on fields tab>cleick on dataelement->click on Furthercharacterstics tab-->select the checkbox'Change Document'.
    If u dont select dis the u cannot see the log entry of the particuylar field..Do like this for each dataelement for each table field...selecting all the fields is not mandatory..u can choose the table field u want to see the log report..
    Once u done with dat...
    Goto SCDO transaction> click on create>give a name change doc startwith Z or Y only>Follow the prodedure and in-->name of table field>enter u r TABLE NAME->click on individual field checkbox.--->insertentries..
    Once u done with dis..
    Goto SE16->enter CHDIR or CDPOS->press ENTER->enter u r object id>F8
    U can see the new and old value of a table entry.....

  • Cancelling messages for particular interface

    Can we cancell message for particular condition. Example I want to cancell message for that particular interface. Do we have to run some report for this. Please specify the name for the report which I have to run???
    Shriram

    Yes you have to run one report
    RSXMB_CANCEL_MESSAGES
    There is one blog on this
    /people/gourav.khare2/blog/2007/12/21/mass-cancellation-of-error-messages--xi
    Is this what you are looking for.
    Can you please explain the same in detail
    Thanks
    Do reward points if helpful

  • How to prevent JaxB creation of 2 Interfaces for each Element?

    hi,
    does any body know how to prevent JaxB creation of 2 Interfaces for each Element (The Content Interface and the element interface)?
    I want to configure JaxB to use only one Interface and only one implementation Class.
    Thank's,

    I am sorry I can not answer your question, I have got the same problem. Could you please email me to
    [email protected] when you know the answer, please.
    I have a question for you. When and complex type is validated, I get the object which contains the error. ( or objects ).
    However. How do know the position in the actual parent object. basically. Is there a way to know exactly the position of that attribute in that object. I need to store errors strings.
    The first problem derives from this one:
    It is not possible to execute validate function for a primitive attribute inside an structure.
    I would appreciate your help.
    Thanks.
    Gustavo.

  • Could not connect to wicd's D-Bus interface. Check the wicd log for er

    Having issues getting wireless to work on Acer V3 551.  Wired works great.  I'm new to Arch from Ubuntu, so please be nice to me
    On startup, I get two error dialog boxes:
    #1: Could not connect to wicd's D-Bus interface. Check the wicd log for error messages.
    #2: The wicd daemon has shut down. The UI will not function properly until it is restarted.
    Network info:
    23:01:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
    24:02:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
    wicd-curses terminal output:
    wicd-curses
    Can't connect to the daemon, trying to start it automatically...
    Traceback (most recent call last):
      File "/usr/share/wicd/curses/wicd-curses.py", line 1043, in <module>
        setup_dbus()
      File "/usr/share/wicd/curses/wicd-curses.py", line 1031, in setup_dbus
        dbus_ifaces = dbusmanager.get_dbus_ifaces()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 36, in get_dbus_ifaces
        return DBUS_MANAGER.get_dbus_ifaces()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 62, in get_dbus_ifaces
        if not self._dbus_ifaces: connect_to_dbus()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 48, in connect_to_dbus
        return DBUS_MANAGER.connect_to_dbus()
      File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 79, in connect_to_dbus
        proxy_obj = self._bus.get_object("org.wicd.daemon", '/org/wicd/daemon')
      File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 241, in get_object
        follow_name_owner_changes=follow_name_owner_changes)
      File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
        self._named_service = conn.activate_name_owner(bus_name)
      File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 180, in activate_name_owner
        self.start_service_by_name(bus_name)
      File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 278, in start_service_by_name
        'su', (bus_name, flags)))
      File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in call_blocking
        message, timeout)
    dbus.exceptions.DBusException: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.wicd.daemon.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.wicd.daemon.service' for details.
    systemctl status dbus-org.wicd.daemon.service terminal output:
    dbus-org.wicd.daemon.service
       Loaded: error (Reason: No such file or directory)
       Active: inactive (dead)
    I've tried:
    - beginners install suggestions
    - arch wicd suggestions
    - unin/re-installing wicd
    - google research to no avail

    Apologies. First post to the board - will keep post within bracket tags. Sorry for being such a noob.
    Input
    $ systemctl status wicd.service
    Output
    wicd.service - Wicd a wireless and wired network manager for Linux
    Loaded: loaded (/usr/lib/systemd/system/wicd.service; disabled)
    Active: failed (Result: exit-code) since Wed 2013-05-01...
    Process: 972 ExecStart=/usr/sbin/wicd --no-daemon (code=exited, status=1/FAILURE)
    Starting Wicd a wireless and wired network manager for Linux
    It seems like the daemon is already running
    If it is not, please remove /var/run/wicd/wicd.pid and try again.
    wicd.service: main process exited, code=exited, status=1/FAILURE
    Failed to start Wicd a wireless and wired network manager for linux.
    MESSAGE=Unit wicd.service entered a failed state.
    Any thoughts?
    Last edited by roastymctoasty (2013-05-01 15:58:17)

  • Confgiure router to use particular interface IP add.for TACACS+ authenticat

    How to confgiure router to use particular interface's IP address for all comunications with ACS server for TACACS+ authentication.
    Thanks a lot...

    Use the command:
    ip tacacs source-interface

  • Preventing update to COPA tables for a particular Sales order type

    Hi ,
    We need to have incoming sales order transfer to COPA activated only for one particular sales order type activated.
    Earlier we implemented note 571697  for user exit to allow COPA update only for particular sales order type.
    This prevented the transfer of SO to actuals table, but off late the performance for VA01 and VA02 has decreased substantially.
    Upon checking, we found this is happening because of other CE4XXXX tables (excluding CE1XXXX) which are getting updated during creation/ change of SO. as the data in these tables is huge .
    If possible, please advise, right userexit to prevent update to these tables.
    Thanks.
    Neeraj

    Thanks for your inputs..I have few more queries on same.
    Initially we had incoming sales order activated in KEKF allong with implemented SAP note 571697, which helped us to update CE1XXXX only for a particular sales order type. This was initial requirement to have system updating COPA values only for one particular sales order type.Also, KEQ3 was also activated which resulted in updates to CE4XXXX. This was not a problem initially since we had few sales orders now that plant has grown old with more sales order (resulting in huge size of CE4XXXX) VA01 is impacted..
    Currently ,since we have KEQ3 activated so, Segment is created the moment we create sales order.. and table CE4XXXX is updated..
    As most of you have suggested to switch off sales order in KEQ3, i need to analyze the impact of this..
    From what i understand CE1XXXX will continue with updation for that order type... and CE4XXXX won't be updated in future..Please correct me if i am wrong..
    Also, please advise what all can be possible impacts on COPA reporting if I switch off from now onwards (client has been using this since long) , and what all should be the precautions that i should take while doing this.
    Thanks

  • No log for am policy agent for iis6

    Hello!
    Im trying to get Policy Agent for IIS to run on my Win Srv 2003 with IIS6 and Sharepoint Services.
    I am running the OpenSSO version of Access Manager.
    I have installed the agent and done the initial cofiguration.
    When i try to browse the resource i get a login prompt (IIS Basic Auth)and cannot login followed by "Not Authorized 401.3"
    I should get redirected to the AM Login page, shouldn't I?
    I tried to look for answers in the log file but the /debug/<id> directory i empty.
    Anyone know what to do?
    The amAgent.properties file:
    # $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
    # The syntax of this file is that of a standard Java properties file,
    # see the documentation for the java.util.Properties.load method for a
    # complete description. (CAVEAT: The SDK in the parser does not currently
    # support any backslash escapes except for wrapping long lines.)
    # All property names in this file are case-sensitive.
    # NOTE: The value of a property that is specified multiple times is not
    # defined.
    # WARNING: The contents of this file are classified as an UNSTABLE
    # interface by Sun Microsystems, Inc. As such, they are subject to
    # significant, incompatible changes in any future release of the
    # software.
    # The name of the cookie passed between the Access Manager
    # and the SDK.
    # WARNING: Changing this property without making the corresponding change
    # to the Access Manager will disable the SDK.
    com.sun.am.cookie.name = iPlanetDirectoryPro
    # The URL for the Access Manager Naming service.
    com.sun.am.naming.url = http://login.lta.mil.se:8080/opensso/namingservice
    # The URL of the login page on the Access Manager.
    com.sun.am.policy.am.login.url = http://login.lta.mil.se:8080/opensso/UI/Login
    # Name of the file to use for logging messages.
    com.sun.am.policy.agents.config.local.log.file = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAgent
    # This property is used for Log Rotation. The value of the property specifies
    # whether the agent deployed on the server supports the feature of not. If set
    # to false all log messages are written to the same file.
    com.sun.am.policy.agents.config.local.log.rotate = true
    # Name of the Access Manager log file to use for logging messages to
    # Access Manager.
    # Just the name of the file is needed. The directory of the file
    # is determined by settings configured on the Access Manager.
    com.sun.am.policy.agents.config.remote.log = amAuthLog.sharepoint.lta.mil.se.80
    # Set the logging level for the specified logging categories.
    # The format of the values is
    # <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
    # The currently used module names are: AuthService, NamingService,
    # PolicyService, SessionService, PolicyEngine, ServiceEngine,
    # Notification, PolicyAgent, RemoteLog and all.
    # The all module can be used to set the logging level for all currently
    # none logging modules. This will also establish the default level for
    # all subsequently created modules.
    # The meaning of the 'Level' value is described below:
    # 0 Disable logging from specified module*
    # 1 Log error messages
    # 2 Log warning and error messages
    # 3 Log info, warning, and error messages
    # 4 Log debug, info, warning, and error messages
    # 5 Like level 4, but with even more debugging messages
    # 128 log url access to log file on AM server.
    # 256 log url access to log file on local machine.
    # If level is omitted, then the logging module will be created with
    # the default logging level, which is the logging level associated with
    # the 'all' module.
    # for level of 128 and 256, you must also specify a logAccessType.
    # *Even if the level is set to zero, some messages may be produced for
    # a module if they are logged with the special level value of 'always'.
    com.sun.am.log.level = 5
    # The org, username and password for Agent to login to AM.
    com.sun.am.policy.am.username = UrlAccessAgent
    com.sun.am.policy.am.password = PN4rEZ1uhx1404ivWY6HPQ==
    # Name of the directory containing the certificate databases for SSL.
    com.sun.am.sslcert.dir = C:/Sun/Access_Manager/Agents/2.2/iis6/cert
    # Set this property if the certificate databases in the directory specified
    # by the previous property have a prefix.
    com.sun.am.certdb.prefix =
    # Should agent trust all server certificates when Access Manager
    # is running SSL?
    # Possible values are true or false.
    com.sun.am.trust_server_certs = true
    # Should the policy SDK use the Access Manager notification
    # mechanism to maintain the consistency of its internal cache? If the value
    # is false, then a polling mechanism is used to maintain cache consistency.
    # Possible values are true or false.
    com.sun.am.notification.enable = true
    # URL to which notification messages should be sent if notification is
    # enabled, see previous property.
    com.sun.am.notification.url = http://sharepoint.lta.mil.se:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
    # This property determines whether URL string case sensitivity is
    # obeyed during policy evaluation
    com.sun.am.policy.am.url_comparison.case_ignore = true
    # This property determines the amount of time (in minutes) an entry
    # remains valid after it has been added to the cache. The default
    # value for this property is 3 minutes.
    com.sun.am.policy.am.polling.interval=3
    # This property allows the user to configure the User Id parameter passed
    # by the session information from the access manager. The value of User
    # Id will be used by the agent to set the value of REMOTE_USER server
    # variable. By default this parameter is set to "UserToken"
    com.sun.am.policy.am.userid.param=UserToken
    # Profile attributes fetch mode
    # String attribute mode to specify if additional user profile attributes should
    # be introduced into the request. Possible values are:
    # NONE - no additional user profile attributes will be introduced.
    # HTTP_HEADER - additional user profile attributes will be introduced into
    # HTTP header.
    # HTTP_COOKIE - additional user profile attributes will be introduced through
    # cookies.
    # If not within these values, it will be considered as NONE.
    com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
    # The user profile attributes to be added to the HTTP header. The
    # specification is of the format ldap_attribute_name|http_header_name[,...].
    # ldap_attribute_name is the attribute in data store to be fetched and
    # http_header_name is the name of the header to which the value needs
    # to be assigned.
    # NOTE: In most cases, in a destination application where a "http_header_name"
    # shows up as a request header, it will be prefixed by HTTP_, and all
    # lower case letters will become upper case, and any - will become _;
    # For example, "common-name" would become "HTTP_COMMON_NAME"
    com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organiz ational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
    # Session attributes mode
    # String attribute mode to specify if additional user session attributes should
    # be introduced into the request. Possible values are:
    # NONE - no additional user session attributes will be introduced.
    # HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
    # HTTP_COOKIE - additional user session attributes will be introduced through cookies.
    # If not within these values, it will be considered as NONE.
    com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
    # The session attributes to be added to the HTTP header. The specification is
    # of the format session_attribute_name|http_header_name[,...].
    # session_attribute_name is the attribute in session to be fetched and
    # http_header_name is the name of the header to which the value needs to be
    # assigned.
    # NOTE: In most cases, in a destination application where a "http_header_name"
    # shows up as a request header, it will be prefixed by HTTP_, and all
    # lower case letters will become upper case, and any - will become _;
    # For example, "common-name" would become "HTTP_COMMON_NAME"
    com.sun.am.policy.agents.config.session.attribute.map=
    # Response Attribute Fetch Mode
    # String attribute mode to specify if additional user response attributes should
    # be introduced into the request. Possible values are:
    # NONE - no additional user response attributes will be introduced.
    # HTTP_HEADER - additional user response attributes will be introduced into
    # HTTP header.
    # HTTP_COOKIE - additional user response attributes will be introduced through
    # cookies.
    # If not within these values, it will be considered as NONE.
    com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
    # The response attributes to be added to the HTTP header. The specification is
    # of the format response_attribute_name|http_header_name[,...].
    # response_attribute_name is the attribute in policy response to be fetched and
    # http_header_name is the name of the header to which the value needs to be
    # assigned.
    # NOTE: In most cases, in a destination application where a "http_header_name"
    # shows up as a request header, it will be prefixed by HTTP_, and all
    # lower case letters will become upper case, and any - will become _;
    # For example, "common-name" would become "HTTP_COMMON_NAME"
    com.sun.am.policy.agents.config.response.attribute.map=
    # The cookie name used in iAS for sticky load balancing
    com.sun.am.policy.am.lb.cookie.name = GX_jst
    # indicate where a load balancer is used for Access Manager
    # services.
    # true | false
    com.sun.am.load_balancer.enable = false
    ####Agent Configuration####
    # this is for product versioning, please do not modify it
    com.sun.am.policy.agents.config.version=2.2
    # Set the url access logging level. the choices are
    # LOG_NONE - do not log user access to url
    # LOG_DENY - log url access that was denied.
    # LOG_ALLOW - log url access that was allowed.
    # LOG_BOTH - log url access that was allowed or denied.
    com.sun.am.policy.agents.config.audit.accesstype = LOG_BOTH
    # Agent prefix
    com.sun.am.policy.agents.config.agenturi.prefix = http://sharepoint.lta.mil.se:80/amagent
    # Locale setting.
    com.sun.am.policy.agents.config.locale = en_US
    # The unique identifier for this agent instance.
    com.sun.am.policy.agents.config.instance.name = unused
    # Do SSO only
    # Boolean attribute to indicate whether the agent will just enforce user
    # authentication (SSO) without enforcing policies (authorization)
    com.sun.am.policy.agents.config.do_sso_only = true
    # The URL of the access denied page. If no value is specified, then
    # the agent will return an HTTP status of 403 (Forbidden).
    com.sun.am.policy.agents.config.accessdenied.url =
    # This property indicates if FQDN checking is enabled or not.
    com.sun.am.policy.agents.config.fqdn.check.enable = true
    # Default FQDN is the fully qualified hostname that the users should use
    # in order to access resources on this web server instance. This is a
    # required configuration value without which the Web server may not
    # startup correctly.
    # The primary purpose of specifying this property is to ensure that if
    # the users try to access protected resources on this web server
    # instance without specifying the FQDN in the browser URL, the Agent
    # can take corrective action and redirect the user to the URL that
    # contains the correct FQDN.
    # This property is set during the agent installation and need not be
    # modified unless absolutely necessary to accommodate deployment
    # requirements.
    # WARNING: Invalid value for this property can result in the Web Server
    # becoming unusable or the resources becoming inaccessible.
    # See also: com.sun.am.policy.agents.config.fqdn.check.enable,
    # com.sun.am.policy.agents.config.fqdn.map
    com.sun.am.policy.agents.config.fqdn.default = sharepoint.lta.mil.se
    # The FQDN Map is a simple map that enables the Agent to take corrective
    # action in the case where the users may have typed in an incorrect URL
    # such as by specifying partial hostname or using an IP address to
    # access protected resources. It redirects the browser to the URL
    # with fully qualified domain name so that cookies related to the domain
    # are received by the agents.
    # The format for this property is:
    # com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
    # This property can also be used so that the agents use the name specified
    # in this map instead of the web server's actual name. This can be
    # accomplished by doing the following.
    # Say you want your server to be addressed as xyz.hostname.com whereas the
    # actual name of the server is abc.hostname.com. The browsers only knows
    # xyz.hostname.com and you have specified polices using xyz.hostname.com at
    # the Access Manager policy console, in this file set the mapping as
    # com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
    # Another example is if you have multiple virtual servers say rst.hostname.com,
    # uvw.hostname.com and xyz.hostname.com pointing to the same actual server
    # abc.hostname.com and each of the virtual servers have their own policies
    # defined, then the fqdnMap should be defined as follows:
    # com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
    # WARNING: Invalid value for this property can result in the Web Server
    # becoming unusable or the resources becoming inaccessible.
    com.sun.am.policy.agents.config.fqdn.map =
    # Cookie Reset
    # This property must be set to true, if this agent needs to
    # reset cookies in the response before redirecting to
    # Access Manager for Authentication.
    # By default this is set to false.
    # Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
    com.sun.am.policy.agents.config.cookie.reset.enable=false
    # This property gives the comma separated list of Cookies, that
    # need to be included in the Redirect Response to Access Manager.
    # This property is used only if the Cookie Reset feature is enabled.
    # The Cookie details need to be specified in the following Format
    # name[=value][;Domain=value]
    # If "Domain" is not specified, then the default agent domain is
    # used to set the Cookie.
    # Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
    # token=value;Domain=subdomain.domain.com
    com.sun.am.policy.agents.config.cookie.reset.list=
    # This property gives the space separated list of domains in
    # which cookies have to be set in a CDSSO scenario. This property
    # is used only if CDSSO is enabled.
    # If this property is left blank then the fully qualified cookie
    # domain for the agent server will be used for setting the cookie
    # domain. In such case it is a host cookie instead of a domain cookie.
    # Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
    com.sun.am.policy.agents.config.cookie.domain.list=
    # user id returned if accessing global allow page and not authenticated
    com.sun.am.policy.agents.config.anonymous_user=anonymous
    # Enable/Disable REMOTE_USER processing for anonymous users
    # true | false
    com.sun.am.policy.agents.config.anonymous_user.enable=false
    # Not enforced list is the list of URLs for which no authentication is
    # required. Wildcards can be used to define a pattern of URLs.
    # The URLs specified may not contain any query parameters.
    # Each service have their own not enforced list. The service name is suffixed
    # after "# com.sun.am.policy.agents.notenforcedList." to specify a list
    # for a particular service. SPACE is the separator between the URL.
    com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
    # Boolean attribute to indicate whether the above list is a not enforced list
    # or an enforced list; When the value is true, the list means enforced list,
    # or in other words, the whole web site is open/accessible without
    # authentication except for those URLs in the list.
    com.sun.am.policy.agents.config.notenforced_list.invert = false
    # Not enforced client IP address list is a list of client IP addresses.
    # No authentication and authorization are required for the requests coming
    # from these client IP addresses. The IP address must be in the form of
    # eg: 192.168.12.2 1.1.1.1
    com.sun.am.policy.agents.config.notenforced_client_ip_list =
    # Enable POST data preservation; By default it is set to false
    com.sun.am.policy.agents.config.postdata.preserve.enable = false
    # POST data preservation : POST cache entry lifetime in minutes,
    # After the specified interval, the entry will be dropped
    com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
    # Cross-Domain Single Sign On URL
    # Is CDSSO enabled.
    com.sun.am.policy.agents.config.cdsso.enable=false
    # This is the URL the user will be redirected to for authentication
    # in a CDSSO Scenario.
    com.sun.am.policy.agents.config.cdcservlet.url =
    # Enable/Disable client IP address validation. This validate
    # will check if the subsequent browser requests come from the
    # same ip address that the SSO token is initially issued against
    com.sun.am.policy.agents.config.client_ip_validation.enable = false
    # Below properties are used to define cookie prefix and cookie max age
    com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
    com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
    # Logout URL - application's Logout URL.
    # This URL is not enforced by policy.
    # if set, agent will intercept this URL and destroy the user's session,
    # if any. The application's logout URL will be allowed whether or not
    # the session destroy is successful.
    com.sun.am.policy.agents.config.logout.url=
    # Any cookies to be reset upon logout in the same format as cookie_reset_list
    com.sun.am.policy.agents.config.logout.cookie.reset.list =
    # By default, when a policy decision for a resource is needed,
    # agent gets and caches the policy decision of the resource and
    # all resource from the root of the resource down, from the Access Manager.
    # For example, if the resource is http://host/a/b/c, the the root of the
    # resource is http://host/. This is because more resources from the
    # same path are likely to be accessed subsequently.
    # However this may take a long time the first time if there
    # are many many policies defined under the root resource.
    # To have agent get and cache the policy decision for the resource only,
    # set the following property to false.
    com.sun.am.policy.am.fetch_from_root_resource = true
    # Whether to get the client's hostname through DNS reverse lookup for use
    # in policy evaluation.
    # It is true by default, if the property does not exist or if it is
    # any value other than false.
    com.sun.am.policy.agents.config.get_client_host_name = true
    # The following property is to enable native encoding of
    # ldap header attributes forwarded by agents. If set to true
    # agent will encode the ldap header value in the default
    # encoding of OS locale. If set to false ldap header values
    # will be encoded in UTF-8
    com.sun.am.policy.agents.config.convert_mbyte.enable = false
    #When the not enforced list or policy has a wildcard '*' character, agent
    #strips the path info from the request URI and uses the resulting request
    #URI to check against the not enforced list or policy instead of the entire
    #request URI, in order to prevent someone from getting access to any URI by
    #simply appending the matching pattern in the policy or not enforced list.
    #For example, if the not enforced list has the value http://host/*.gif,
    #stripping the path info from the request URI will prevent someone from
    #getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
    #However when a web server (for exmample apache) is configured to be a reverse
    #proxy server for a J2EE application server, path info is interpreted in a different
    #manner since it maps to a resource on the proxy instead of the app server.
    #This prevents the not enforced list or policy from being applied to part of
    #the URI below the app serverpath if there is a wildcard character. For example,
    #if the not enforced list has value http://host/webapp/servcontext/* and the
    #request URL is http://host/webapp/servcontext/example.jsp the path info
    #is /servcontext/example.jsp and the resulting request URL with path info stripped
    #is http://host/webapp, which will not match the not enforced list. By setting the
    #following property to true, the path info will not be stripped from the request URL
    #even if there is a wild character in the not enforced list or policy.
    #Be aware though that if this is set to true there should be nothing following the
    #wildcard character '*' in the not enforced list or policy, or the
    #security loophole described above may occur.
    com.sun.am.policy.agents.config.ignore_path_info = false
    # Override the request url given by the web server with
    # the protocol, host or port of the agent's uri specified in
    # the com.sun.am.policy.agents.agenturiprefix property.
    # These may be needed if the agent is sitting behind a ssl off-loader,
    # load balancer, or proxy, and either the protocol (HTTP scheme),
    # hostname, or port of the machine in front of agent which users go through
    # is different from the agent's protocol, host or port.
    com.sun.am.policy.agents.config.override_protocol =
    com.sun.am.policy.agents.config.override_host =
    com.sun.am.policy.agents.config.override_port = true
    # Override the notification url in the same way as other request urls.
    # Set this to true if any one of the override properties above is true,
    # and if the notification url is coming through the proxy or load balancer
    # in the same way as other request url's.
    com.sun.am.policy.agents.config.override_notification.url =
    # The following property defines how long to wait in attempting
    # to connect to an Access Manager AUTH server.
    # The default value is 2 seconds. This value needs to be increased
    # when receiving the error "unable to find active Access Manager Auth server"
    com.sun.am.policy.agents.config.connection_timeout =
    # Time in milliseconds the agent will wait to receive the
    # response from Access Manager. After the timeout, the connection
    # will be drop.
    # A value of 0 means that the agent will wait until receiving the response.
    # WARNING: Invalid value for this property can result in
    # the resources becoming inaccessible.
    com.sun.am.receive_timeout = 0
    # The three following properties are for IIS6 agent only.
    # The two first properties allow to set a username and password that will be
    # used by the authentication filter to pass the Windows challenge when the Basic
    # Authentication option is selected in Microsoft IIS 6.0. The authentication
    # filter is named amiis6auth.dll and is located in
    # Agent_installation_directory/iis6/bin. It must be installed manually on
    # the web site ("ISAPI Filters" tab in the properties of the web site).
    # It must also be uninstalled manually when unintalling the agent.
    # The last property defines the full path for the authentication filter log file.
    com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
    com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
    com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAuthFilter

    If the agent doesnot start properly you would always get redirected to com.sun.am.policy.agents.config.accessdenied.url , if thats not specified you will get a 403.
    For the agent itself check that the naming.url is correct. the agent username and passwords are correct, and see that the user has priviledges to write to the agent log files. Apart from these post the windows event logs.

  • One or more post-processing actions failed. Consult the OPP service log for details.

    hi expert plz help me i can't understand here what can i do to resove this error.
    here is the logfile details of output post processor
    ebs- 11i (11.5.10.2)
    os - rhel 4
    [9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
    [9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
    [9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
    [9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
    [9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
    [9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
    [9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
    [9/2/13 4:59:35 PM] [2984174:RT21672063]
    Template code: PURCHASE_REGISTER_ITEMWISE
    Template app:  CONA
    Language:      en
    Territory:     00
    Output type:   PDF
    [090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
    [090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
    [090213_045936408][][EXCEPTION] [DEBUG]  [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
    [090213_045936408][][EXCEPTION] [DEBUG]  [SECURITY_GROUP_ID]:[0]
    [090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
    [090213_045936408][][EXCEPTION] [DEBUG]  [NLS_CHARACTERSET]:[US7ASCII]
    [090213_045936408][][EXCEPTION] [DEBUG]  [RESP_APPL_ID]:[-1]
    [090213_045936408][][EXCEPTION] [DEBUG]  [NLS_LANGUAGE]:[AMERICAN]
    [090213_045936408][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MIN]:[1]
    [090213_045936409][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MAX]:[2]
    [090213_045936409][][EXCEPTION] [DEBUG]  [NLS_NUMERIC_CHARACTERS]:[.,]
    [090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
    [090213_045936409][][EXCEPTION] [DEBUG]  [RESP_ID]:[-1]
    [090213_045936409][][EXCEPTION] [DEBUG]  [FND_MAX_JDBC_CONNECTIONS]:[500]
    [090213_045936410][][EXCEPTION] [DEBUG]  [FND_JDBC_USABLE_CHECK]:[false]
    [090213_045936410][][EXCEPTION] [DEBUG]  [USER_ID]:[-1]
    [090213_045936410][][EXCEPTION] [DEBUG]  [NLS_TERRITORY]:[AMERICA]
    [090213_045936410][][EXCEPTION] [DEBUG]  [FND_JDBC_PLSQL_RESET]:[false]
    [090213_045936410][][EXCEPTION] [DEBUG]  [FND_JDBC_CONTEXT_CHECK]:[true]
    [090213_045936418][][EXCEPTION] [DEBUG]  [NLS_DATE_FORMAT]:[DD-MON-RR]
    [090213_045936418][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
    [090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
    [090213_045936418][][EXCEPTION] [DEBUG]  [NLS_SORT]:[BINARY]
    [090213_045936418][][EXCEPTION] [DEBUG]  [NLS_DATE_LANGUAGE]:[AMERICAN]
    [090213_045936419][][EXCEPTION] [DEBUG]  [LOGIN_ID]:[-1]
    [090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
    [090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
    [090213_045936419][][EXCEPTION] [DEBUG]  [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
    [090213_045936419][][EXCEPTION] [DEBUG]  [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
    [090213_045936419][][EXCEPTION] [DEBUG]  [java.vm.version]:[1.4.2_04-b05]
    [090213_045936419][][EXCEPTION] [DEBUG]  [OVERRIDE_DBC]:[true]
    [090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
    [090213_045936419][][EXCEPTION] [DEBUG]  [java.vm.vendor]:[Sun Microsystems Inc.]
    [090213_045936420][][EXCEPTION] [DEBUG]  [java.vendor.url]:[http://java.sun.com/]
    [090213_045936420][][EXCEPTION] [DEBUG]  [path.separator]:[:]
    [090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
    [090213_045936420][][EXCEPTION] [DEBUG]  [java.vm.name]:[Java HotSpot(TM) Client VM]
    [090213_045936420][][EXCEPTION] [DEBUG]  [file.encoding.pkg]:[sun.io]
    [090213_045936420][][EXCEPTION] [DEBUG]  [user.country]:[US]
    [090213_045936420][][EXCEPTION] [DEBUG]  [sun.os.patch.level]:[unknown]
    [090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
    [090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
    [090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
    [090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
    [090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
    [090213_045936421][][EXCEPTION] [DEBUG]  [os.arch]:[i386]
    [090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
    [090213_045936421][][EXCEPTION] [DEBUG]  [java.io.tmpdir]:[/tmp]
    [090213_045936422][][EXCEPTION] [DEBUG]  [line.separator]:[
    [090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
    [090213_045936422][][EXCEPTION] [DEBUG]  [os.name]:[Linux]
    [090213_045936422][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MIN]:[1]
    [090213_045936422][][EXCEPTION] [DEBUG]  [cpid]:[2984174]
    [090213_045936422][][EXCEPTION] [DEBUG]  [sun.java2d.fontpath]:[]
    [090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
    [090213_045936423][][EXCEPTION] [DEBUG]  [java.specification.name]:[Java Platform API Specification]
    [090213_045936423][][EXCEPTION] [DEBUG]  [java.class.version]:[48.0]
    [090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
    [090213_045936423][][EXCEPTION] [DEBUG]  [os.version]:[2.6.9-82.ELsmp]
    [090213_045936424][][EXCEPTION] [DEBUG]  [LONG_RUNNING_JVM]:[true]
    [090213_045936424][][EXCEPTION] [DEBUG]  [user.home]:[/home/appdemo]
    [090213_045936424][][EXCEPTION] [DEBUG]  [user.timezone]:[GMT+05:30]
    [090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
    [090213_045936424][][EXCEPTION] [DEBUG]  [file.encoding]:[ANSI_X3.4-1968]
    [090213_045936424][][EXCEPTION] [DEBUG]  [java.specification.version]:[1.4]
    [090213_045936424][][EXCEPTION] [DEBUG]  [CACHEMODE]:[DISTRIBUTED]
    [090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
    [090213_045936424][][EXCEPTION] [DEBUG]  [user.name]:[appdemo]
    [090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
    [090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
    [090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
    [090213_045936425][][EXCEPTION] [DEBUG]  [sun.arch.data.model]:[32]
    [090213_045936425][][EXCEPTION] [DEBUG]  [user.language]:[en]
    [090213_045936425][][EXCEPTION] [DEBUG]  [java.specification.vendor]:[Sun Microsystems Inc.]
    [090213_045936425][][EXCEPTION] [DEBUG]  [java.vm.info]:[mixed mode]
    [090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
    [090213_045936425][][EXCEPTION] [DEBUG]  [java.version]:[1.4.2_04]
    [090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
    [090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
    [090213_045936426][][EXCEPTION] [DEBUG]  [java.vendor]:[Sun Microsystems Inc.]
    [090213_045936426][][EXCEPTION] [DEBUG]  [FND_JDBC_BUFFER_MAX]:[2]
    [090213_045936426][][EXCEPTION] [DEBUG]  [file.separator]:[/]
    [090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
    [090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
    [090213_045936426][][EXCEPTION] [DEBUG]  [sun.cpu.endian]:[little]
    [090213_045936426][][EXCEPTION] [DEBUG]  [APPLOUT]:[out/ORIDEMO_demo]
    [090213_045936427][][EXCEPTION] [DEBUG]  [sun.cpu.isalist]:[]
    [9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
            at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
            at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
            at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
            at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
            at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
            at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
    Caused by: java.io.UnsupportedEncodingException: &Encoding
            at sun.io.Converters.getConverterClass(Converters.java:215)
            at sun.io.Converters.newConverter(Converters.java:248)
            at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
            at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
            at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
            at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
            at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
            at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
            at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
            ... 17 more
    [9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
    [9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
    [9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
    [9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
    [9/2/13 5:10:51 PM] [2984174:RT21672114]
    Template code: PURCHASE_REGISTER_ITEMWISE
    Template app:  CONA
    Language:      en
    Territory:     00
    Output type:   PDF
    [9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
            at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
            at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
            at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
            at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
            at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
            at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
            at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
            at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
    Caused by: java.io.UnsupportedEncodingException: &Encoding
            at sun.io.Converters.getConverterClass(Converters.java:215)
            at sun.io.Converters.newConverter(Converters.java:248)
            at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
            at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
            at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
            at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
            at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
            at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
            at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
            at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
            ... 17 more
    [9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
    thaks
    pritesh

    hi experts
    thanks for ur replay,
    this issue is occured with only the particular request and this is custom report. i try some step
    down the manager run the cmclean.sql, increease the  processes of output postprocessor but not get the any type of effect on issue...
    and also follow the step that describe in the below doc:
    Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
    To Bottom
    request log file details below:
    +---------------------------------------------------------------------------+
    CONA Custom: Version : UNKNOWN - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
    +---------------------------------------------------------------------------+
    Current system time is 02-SEP-2013 17:10:29
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_SEGM='02'
    P_CHART_OF_ACCOUNTS_ID='50268'
    p_from_date='2012/04/01 00:00:00'
    p_to_date='2012/04/05 00:00:00'
    P_YES_NO='No'
    XML_REPORTS_XENVIRONMENT is :
    /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    _AMERICA.UTF8
    Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
    (c) Copyright 1999 Oracle Corporation.  All rights reserved.
    Enter Username:
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    +------------- 1) PUBLISH -------------+
    Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
    Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    +--------------------------------------+
    +------------- 2) PRINT   -------------+
    +--------------------------------------+
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 02-SEP-2013 17:10:52
    +---------------------------------------------------------------------------+
    i check the document that u all suggest above after that i update u as soon as possible..
    thanks & regards
    pritesh ranjan

  • Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

    Hi all,
    I have TFS2012 and run several projects.
    We encounterwed with such an error while using Build server.
    Overall Build Process
    Initial Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    00:00
    Get the Build
    00:00
    Update Build Number
    Initial Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Final Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Result = Ephone_DIT_Deploy_20150424.1
    01:56
    Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
    Initial Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    00:00
    Get the Build Directory
    Initial Property Values
    Result = d:\temp\217\CTI\Ephone_DIT_Deploy
    01:53
    If Not String.IsNullOrEmpty(ConfigurationFolderPath)
    Initial Property Values
    Condition = True
    01:53
    Run TfsBuild for Configuration Folder
    Initial Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp" 
    00:08
    Getting sources
    00:02
    Labeling sources
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
    00:19
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:10
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    MSBuild Log File
    00:08
    Generating list of changesets
    00:20
    Built Skins\SkinEPhone.cs for default targets.
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
    Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
       at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
    00:03
    Creating work item
     Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
    Exception Stack Trace:    at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Final Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    Final Property Values
    Condition = True
    Final Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
    Final Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    Please have a look and guide where to find a problem
    Thanks ahead

    Hi Hooi,
    I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
    From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
    Best regards,

  • No data in Application failure Analysis report for a particular application alone.

    Dear All, 
    We are not able to get the data in Application Failure Analysis report from Appadvisor for a particular application(say ABC) alone, whereas it works fine for different application. Also,we could get the data from other reports(such
    as Application status,Problem distribution analysis,etc) for the same application(ABC). PFB snapshot for your reference.
    Thanks in Advance.
    Regards,
    Rajesh Kumar C

    Hi,
    Is there any error message when you run Application Failure Analysis report for the specific application?
    Does this application have any failure alerts?
    You may also look into operation manager even logs to check is there any errors or warnings.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Need help to enable trace/logging for java debugging CRM 5.0 WebShop

    Dear experts,
    I'm new to sap, and i'm working on CRM 5.0 WebShop J2ee application with nwdi.
    I have to add a new functionnality, which has to call a custom FM in CRM. This FM has been tested and is OK.
    I have read the 2 files SAP_ISA50_DevAndExtGuide.pdf and ISA50_DevAndExtTuts_v1_0.pdf which have explain to me the process flow and organization of the framework.
    By helping me with the tutorials, I wrote all the files for my functionnality, from the jsp with the form, to the custom business backend with the call of the FM with parameters and JCo connection. (+ custom BOM, custom BO, BE interface, BE CRM implementation)
    Everything builds without error, and I deploy the application on my test env.
    Then I go to my webapp, I call the custom jsp with form, I put values, then I validate the form, but my FM is not called, and I don't know where is the problem, because I can't see a trace of the process flow, to know where is the error.
    By searching in this forum I found 2 notes that explain how to activate debug trace for all the application, one note for systems before SP11 and another for systems with SP11 and higher. But I don't know how to see the patchlevel of the system (I went to system information of the j2ee server and the on ly thing I can notice is below the server0 properties : Kernel Version:  7.00 PatchLevel.
    In these notes I read about Visual Administrator : I found this directly on the server with remote desktop, but the progress bar at the bottom of the window don't arrives to 100% and I can't see the properties and values of the parameters for the Log.
    I went to XCM too, and set appinfo and logfiledownload to true, then went to Logging into e-commerce administration console : in the Log configuration tab, I can create new configurations but the effective severity automatically sets to error, even if I set All or Debug manually ; in the session log tab, i tried to launch the application, then start log, then validate my form, then stop log, but I can't find anything about the trace of the process flow in the generated file.
    Please help, I have to finish this for end of week and I'm alone ...
    PS I'm french, and don't speak very well English please excuse me.
    Thank you very much.
    J. Lag.

    Hi
    For logs follow this note no[Creation of logs for B2B and B2C Release 5.0|https://service.sap.com/sap/support/notes/1090753]
    Follow this code for calling custom Function Module
    1) ZBOM.java
    public class ZBOM extends DefaultBusinessObjectManager implements BOManager, BackendAware {
    public static final String ZCUSTOM_BOM = "ZCUSTOM-BOM";
    private ZFunction func;
    public ZBOM() { }
    public ZFunction getFUNC() {
      if (func== null) {
       func= new ZFunction();
       assignBackendObjectManager(func);  }
      return func; }
    public void release() { }
    2) ZFUNCTION.java
    public class ZFunction extends BOBase implements BackendAware {
    private ZInterface backendInterface;
    private BackendObjectManager bem;
    private ZInterface getInterface() {
      if (backendInterface == null) {
       try {
        backendInterface = (ZInterface) bem.createBackendBusinessObject("ZCustomBO");
       } catch (BackendException e) {
      return backendInterface;
    public void setBackendObjectManager(BackendObjectManager bem) {
      this.bem = bem;
    public String getCustomFunc(String value) {
      try {
       return getInterface().getIncotermListvalue) ;
      } catch (RuntimeException e) { return ""; }
    3)ZINTERFACE.java
    public interface ZInterface extends BackendBusinessObject {
         public  String getCustomFunc(String value);
    4) ZBACKEND.java
    public class ZBackend extends BackendBusinessObjectBaseSAP implements ZInterface {
         String exportvalue="";
         public String getCustomFunc(String value) {
              try {
                   Function func =getDefaultJCoConnection().getJCoFunction("Z_CUSTOM_FUNCTION_MODULE");
                   func.getImportParameterList().getField("IMPORTPARAMETER").setValue(value);
                   getDefaultJCoConnection().execute(func);
                   exportvalue = func.getExportParameterList().getString("IMPORTPARAMETER");
              } catch (Exception e) {
                   return exportvalue ;
    5) WEB_INF/xcm/customer/modification/bom-config.xml
    <BusinessObjectManager name="ZCUSTOM-BOM" className="com.sap.isa.custom.ZBOM"/>
    6) WEB_INF/xcm/customer/modification/bom-config.xml
    <config isa:extends="../config[@id='crmdefault']">          
       <businessObject type="ZCustomBO"
                    name="ZCustomBO"
                    className="com.sap.isa.custom.ZBackend"
                    connectionFactoryName="JCO"
                    defaultConnectionName="ISAStateless"/>           
    </config>
    Regards,
    [Sateesh Chandra|http://sateeshchandrach.googlepages.com/isa]

Maybe you are looking for