Prevent multiple personnel actions being performed on the same day

Hi Experts,
Does anyone know if it is possible to prevent multiple personnel actions from being performed on the same day even where the action does not change the status of the employee?
Regards,
Janet

Hi Janet,
i mean to say if you activate the additional action then only the second action on the same day gets stored in to the IT-0302.
if you dont activate additional actions then if you run the second action on same day it will over write the existing record and gives warning message that this record over write the existing record.
so here the point is if additional actions is activated then only system allows you to perform the second action on same day..
other wise it will replace the existing record.
if you want to prevent the additional actions to be prevented even after activating it --i think its not possible because the functionality of the IT 0302 is to save more than one record.
yes you can restrict the to perform the action through authorizations
hope it is clear
regards,
mohammed

Similar Messages

Majority of Apps released are being reviewed/released the same day?

Check this out:
http://www.medialets.com/app-store-metrics/feeds/new/
If you look at the release dates (when they get submitted), they are generally the same day that they hit the AppStore.
I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
What does this mean?
I believe it means that most apps that hit the appstore are getting churned out the same day. If you don't get released on the same day, you might be in for a very long wait, or there is something wrong with you / your app.
Some ideas:
- App that is uninteresting to the reviewers
- It's your second+ app
- Bad reviews / low popularity for existing apps
- Problems with the App
It's an interesting problem. It's unclear to me that there is a solution, except to write high quality, innovative, interesting apps that your pretty sure Apple will like and will get reviewed well / be popular .. which I suppose, isn't such a bad thing, all considered.

My first app took 8 days to go from review to pending contract. It's been pending contract for 3 days now.
I find it unlikely a lot of apps are getting to the store in 1 day.
{quote:title=blazespinnaker wrote:}
I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
{quote}
This contradicts your whole point I think. If your app took 10 days from the release/submit date then why do you think so many apps are going to the store the day they are submitted. Maybe I'm misunderstanding your statement.

How do you stop multiple Youtube videos from playing at the same time?

As of a few days ago, when I click on a youtube video, as the commercial begins to play, you can begin to hear multiple/different commercials playing at the same time. After the commercials, the same issue occurs with the main video--multiple videos are being played at the same time and are not in sync. I've updated all my plug ins and have tried the suggestion posted in the forum provided in the link below in which someone else has expressed the same issue, but nothing has worked so far. Does anyone know what can be done?
http://productforums.google.com/forum/#!topic/youtube/5Lnikma4UqM

Are you loading those videos as Flash or HTML5? It is possible to prevent videos from playing until you click something with Flashblock for Flash or Stop Tube HTML5 for HTML5. You can also stop the commercials with Adblock Plus with an Easylist subscription.
* https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/
* https://addons.mozilla.org/en-US/firefox/addon/flashblock/
* https://addons.mozilla.org/en-US/firefox/addon/stop-tube/

Recruitment: Multiple Actions on the same day

Hi expert,
Understand that in PA, we are able to perform multiple actions on the same day with the aid of Additional Actions infotype (0302).
However, in Recruitment module (i.e. PB), we are unable to perform the above, the previous action record will be deleted, thus we can't keep track of the actions taken.
Can we extend the use of Additional action infotype to Recruitment (PB db) ? or is there other way to perform multiple actions on the same day in Recruitment ?
All advises are appreciated.
cheers,
Sophie Tran.

Hi,
Please check the below link for that..
http://sap.ittoolbox.com//groups/technical-functional/sap-hr/recruitment-multiple-actions-on-the-same-day-384674
Thanks & Regards,
Sandip Biswas

Two actions on the same day

Hi Experts,
I have activated the additional actions, even though i am not able to perform two actions on the same day. When i am running the second action on the same day, system deletes the first action. Plz help
regards
Kunal

Hi Kunal..
Check below:
Cause and prerequisites
You use the functions 'Additional actions' (infotype 0302) (that is, flag ADMIN EVSUP = 1 in table T77S0). If you delete or shift a created personnel action type 'Leaving' and then create a new personnel action without leaving the transaction, on the list screen of infotype 0000, the system does not display the last but one personnel action.
Solution
To correct the display problem, start report RPUEVSUP for the affected personnel number. Then check Customizing of the personnel action types (table T529A), since the report sets indicator U0302 (update of infotype 0302) active for all personnel actions.
Hope this helps ! if so reward.
Thanks
Shyam

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

Does your device require being connected to the same wifi network as your computer to be able to backup onto it?

Does your device require being connected to the same wifi network to backup onto your computer?
I know this may sound a silly question but I am a complete noivce with all things iPhone and computer based. Basically, I just wondered, if my phone is connected to one wifi network (as in when am away from home), will it be able to download my content onto my computer which is on another wifi network?

Thank you.
'Of course, you could just turn on iCloud backups, which will back up to iCloud at night so long as the phone is connected to power and a WiFi network'
IS this also the case for iCloud backup? As in, the device and computer must be connected via the same wifi network to perform the backup?

I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

If two of you shared the same contacts you were logged in with the same Apple ID. In order to avoid this you need to use different Apple IDs, and be using separate Macs or separate user accounts on the same Mac.
One or other of you should create a new Apple ID at http://appleid.apple.com for which you will need a non-Apple email address which hasn't been associated with another Apple ID.

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

Multiple leave requests on the same day

We would like to enforce a check so that multiple leave requests of the same type cannot be submitted for the same day on ESS.
How can this be achieved ? We are on EP 7.0 and ECC 6.0 and are using webdynpro java version of the ESS applications.
Any configuration available for this or does this require a BADI implementation ?
Thanks in advance.
Thank You,
Raj

http://wiki.sdn.sap.com/wiki/display/ERPHCM/ValidationsforESSLeaverequest
read here, it requies a badi implementation only, no config is available!
You have to call backend exits from the badi of leave request
Edited by: Siddharth Rajora on Aug 2, 2011 7:48 AM

Multiple Meter Reads on the same day and Billing

Hi All,
There is a requirement to hold all reads received from Customer/ Meter Reader etc even they these are received on the same day for e.g. schedule read could be received in the morning, followed by customer read through internet and then another customer read through IVR system.
Can we store multiple reads on the same day?
If a read goes into implausible and then it's corrected, implausible read is replaced by corrected read. Is there any way to store old implausible read?
Thanks in advance.
SJ

Your questions answered below:
1. So my question is can we enter multiple reads to the Meter on a single day with same meter read reason? - Yes when we have MR reason which is not relevant to billing. In your case its 09 which is nonrelevant and you should be able to enter multiple reads with different time.
Make sure you supply time also when you are submitting your read. However there is a restriction of what level you can enter multiple MRs since SAP stores read at Minute level so you can not post 2 reads in same minute.
2. Are there any configurations to be done to allow multiple meter readings on a single day? - Not sure but standard SAP should allow you to save multiple MRs with the above rules.
Cheers
Jignesh

Can multiple Apple ID's be on the same iCloud

Can multiple Apple ID's be with the same iCloud?

It's not intuitive but it's possible. You must set up your external drive using the APT partition map. Install the PPC version of OS X on one partition. Now here's the trick: You must install an Intel version of Leopard on a drive that has been partitioned using GPT. Then clone that installed version to another partition the external drive that now has the PPC version of Leopard. You now have a PPC version of Leopard on one partition and in Intel version on the other partition. You will find you can boot an Intel Mac from that partition even though the drive is partitioned APT.
The problem is that Leopard will not allow itself to be installed on an APT partitioned drive. But an Intel version of Leopard will work just fine from an APT partitioned drive.

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Hi urinutrioned,
An ExportPDF subscription is tied to a single Adobe ID and password, so it's meant for a single user to access.
Best,
Sara

My Iphone 3gS is not being recognized in Itunes on my laptop. It is charging so the USB port is working properly. My wifes Iphone IS being recognized by the same laptop. My Iphone IS being recognized by the desktop computer and another laptop

My Iphone is not being recognized in Itunes on my laptop. It is charging, so the USB port is working. My Iphone does work on another Laptop in the house and My wifes Iphone is being recognized on the same laptop that mine is not. Any suggestions?

The key bit of information here is that one iPhone works on the computer in question and another does not. So it is unlikely that AMDS is not running or there is a driver problem; if either of these was the problem neither phone would be recognized in iTunes.
Unfortunately, I don't have an answer either. Except to verify that both iPhones (the one that works and the one that doesn't) use the same cable and the same USB port.
Also, are the two iPhones the same model and same iOS version?

If i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

if i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

Yes, but if you want these devices to have complete capability of calling each other they each must have their own separate, individual e mail address. If they don't have individual e mail addresses, the i phones will be able to call each other because you'll be using their individual phone numbers -- the Mac mini will be able to call the i phones, but, the iphones will not be able to call the Mac mini. This is because the iphones will be using the mini's e- mail address to make the call, and if they have the same e mail address, they will think they are calling themselves, so the call will not connect.
So, the way I see it is, if you keep all of the email addresses the same, the only thing you'll loose is the ability of the iphones to call the mini.
EDIT: Thinking about it, my first sentence needs to be modified. Your iphones can share an email address but it must be different from the Mac mini address.
This isn't rocket science, but it can make your head spin. LOL

Prevent multiple personnel actions being performed on the same day

Similar Messages

Maybe you are looking for