Prevent Outbound delivery creation in sales orders with delivery block

Hi gurus
     We are facing the following issue:
     Some sales orders have delivery block header and once they are saved an outbound delivery document is created; we want SAP system creates outbound deliveries only in those cases were sales orders have not a delivery block in header, is there any option or configuration we can use in order to prevent the creation of these documents?
Regards,
Edgar.

Well Edgar,
let's see then in spro
Logistics Execution->Shipping->Deliveries->Define Reasons for Blocking in Shipping
Check out the configuration of your delivery block reason and pay special attention to this instruction:
"In sales documents, you can either enter delivery blocks manually at header level (business data in the sales document header) or they can be proposed automatically by the system. In the latter case, the delivery block must be entered in the respective sales document type (see chapter
"Define sales document types"). In addition, the delivery block in the sales document header is only effective if the delivery block has been assigned to the respective delivery type."
It must be something in the configuration of the delivery block reason you're using.
Regards,
Edgar

Similar Messages

  • Outbound delivery creation - one sales order

    Hi,
    We have an issue on locking of delivery processing of sales orders with two plants.  Is it possible for the two plants to create/change the outbound delivery at the same time? If yes, how?

    Hi,
    This is because plant 2 is processing delivery -2 with reference to sales order.
    So when you want to process deliver -1 then same already created with reference to sales order. it means both delivery cant be accessed one time because reference is sales order, so it lock
    If you want to pick both at same time,
    Then assign one shipping point to both plants, so when you create delivery both item will copy in delivery,then pick both at same time.
    kapil

  • HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

    Dear All,
    I want to contol on creation of Sales order with reference to earlier SO?  While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
    I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
    Nikhil

    Nikhil Deshpande,
          If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
    Thanks,
    Mariano.

  • Link Sale Order with Delivery  through DTW

    Hi All
    While importing Deliveries through DTW, is it possible to Link a Sale Order with Delivery?
    If it is possible then can any one tell me the procedure.
    Thanks in Advance
    Chakrapani Bandaru

    In the template for the document lines, you will find fields for base entry, base type and base line . Fill these with the object type for sales orders, the line number and the doc entry (not doc num) of the relevant linked document

  • Load a sales order with delivery date in the past

    Hi,
    We want to load in the system a sales order with delivery date in the past, and maintain the schedule delivery date in the past. To do that, in the customizing Sales And Distribution / Basic Functions / Delivery Scheduling and Transportation Scheduling / Define Scheduling By Sales Document Type, I selected the flag Blackwards. But the problem is that the rest of the dates in the scredule line: goods issue date, loading date, material avail.date and transportation Plan Date, are in blank and you cannot enter any data because the system deletes it.
    How can I have these dates informed with dates in the past?
    Thanks in advance,

    You can control this using the "Message Control" in the SAP IMG.
    Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Message Control>Influence Message Control
    Using this you convert Error to Warning or even swith off this message.
    Please refer this thread for complete steps:
    Re: How to change an error message to a warning message in SRM
    Note: you need to suppress the messages relevant to your case here.
    Regards
    Kathirvel

  • Creation of sales order with reference to inquiry no.

    Hi gurus!
    Im having trouble in creation of sales order with reference to inquiry no. The scenario is like this one. In va11(creation of inquiry no.), in the field of <b>SERVICE LEVEL</b>, i indicated a value. after the creation of inquiry no, i want to create a sales order with reference to inquiry no. But the problem is, the <b>SERVICE LEVEL</b> field does not have any value. What is the main problem to this scenario? is it the VARIANT CONFIG or the program itself? please help its urgent
    Regards,
    Mackoy

    Dear Machoy,
    In IMG under
    Sales and Distribution -> Sales -> Sales Documents -> Maintain Copy Control for Sales Documents -> Copying Control: Sales Document to Sales Document
    or Transaction VTAA
    http://help.sap.com/erp2005_ehp_02/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
    If you create a sales document with reference to a preceding document, the system copies nearly all the data from the preceding document. The data in the preceding document originally comes from the customer and material master records. Because the data is copied from the preceding documents into the sales document, any changes that have been made to the master data records since the preceding document was created are not included in the sales document. If, when you create with reference, you add another item to the document that was not in the preceding document, the system determines the data for it from the master records, such as the material master or info record.
    You have created an inquiry and a quotation with reference to this inquiry. Before you created the quotation, you changed some data in the material and customer master records.
    You have changed the material description in the material master record. This description is stored in the sales document at item level.
    You have changed the terms of payment in the customer master record from ZB01 to ZB03. These are stored in the sales document at header level.
    When you created the inquiry, the system copies the original material description to the item. If you enter another item in the quotation for the same material, the system displays the new material description for the new item.
    However, the system continues to propose the original term of payment, that is, ZB01, for all items including the new one. This is because it is copied from the header of the preceding document into the header of the quotation, and the change in the customer master record has no affect on the quotation.
    Regards,
    Naveen.

  • How to list Sales Order with credit block

    Hi, Gurus,
    I really don't know how to list sales orders with credit block?
    Is there any way for end user to do it?
    If so, is it possible to list SO with credit block for certain period of time such as one month?
    Any help would be appreciated.

    HI
    Check T-Code VKM2 (Released documents)
    You need to check VKM1 (Blocked Documents)
    Sorry before i gave wrong information , myself i corrected VKM2 for released not for blocked list (Due to non Availability of SAP access )
    Regards,
    Prasanna
    Edited by: prasanna_sap on Feb 7, 2012 7:12 AM

  • Auto Delivery creation for sales order

    Hi All,
    We have requirement to create an outbound delivery for a sales order..
    Can you provide me the steps to follow to achieve this..
    Thanks & Regards
    Santhosh

    Hi
    Value contract is an agreement between the company and customer for a value for a time period
    For example a customer say X makes a contract with company ABC for about 1 lakh rupees between 01.01.2009 to 31.12.2009
    Then you make a value contract order type WK1 with all these  details
    The customer will not buy the whole 1 lakh in a single shot
    He may buy about Rs10000 for 10 times or as many times as he wishes till he reaches 1 lakh within this year
    The each order which he is placing for Rs 10000 is the release order which is nothing but standard order OR
    Now in SAP we make a value contract in t code VA41 with order type WK1 and note down the no
    Again we create release order in VA01 order type OR referencing the contract which we have already created(create with reference)
    This is the process
    For this to happen the copy controls should exist between WK1 to OR in VTAA
    This release order (OR) configuration you can configure (in VOV8) the immediate delivery switch which will create delivery when you save the order
    The immediate delivery switch is used only in Cash sale and rush order in standard SAP
    Regards
    Raja

  • Creation of sales order with reference to Quotation using BAPI

    Hi All,
    I am using BAPI "BAPI_SALESORDER_CREATEFROMDAT2" for creating sales order. Can you please tell how can I create a sales order with reference to a Quotation.

    Vinit,
    In your header structure, set like this:
      hdr-REF_DOC = i_order-vbeln.  "assign quotation # to sales order
      hdr-REFDOC_CAT = 'B'.         "assign Quotation to VBTYP_N.
    For each line item, set as follows:
    Assigning ref doc to create line item entries in VBFA.
        itm-REF_DOC    = i_order-vbeln.  "quote number
        itm-REF_DOC_IT = i_vbap-posnr.   "quote line item #
        itm-REF_DOC_CA = 'B'.
      data: ret_text type BAPIRET2.
      CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
        EXPORTING
          ORDER_HEADER_IN           = hdr
          convert                   = 'X'
        IMPORTING
          SALESDOCUMENT             = salesdoc
        TABLES
          return                    = ret_tbl
          ORDER_ITEMS_IN            = itm
          ORDER_PARTNERS            = prtnr
          ORDER_ITEMS_inx           = itmx
          ORDER_CONDITIONS_IN       = conds
          ORDER_CONDITIONS_INX      = condsx
          order_schedules_in        = schd_lin.
    Don't forget those points.

  • Creation of sales order with reference - Zfields in Add data B are not cop

    Hi all,
              Please help me in the issue . I am creating sales order with reference to returns order . All item fields are getting copied but the Zfields which are added in addtional data b of sales order are not getting copied. Can anyone please let me know the procedure to copy the custom fields.
    Thanks in advance,

    The setting of field when copy by reference is best done in the copy rules.
    If you go to transaction VTAA, and look to the order type you are copying to, you will find a data transfer rule number. 
    Then go to transaction VOFM, menu option DATA TRANSFER -> ORDERS and find the matching data transfer rule number.
    Select and press the "Source text"  button, here you will find the data from the copied order in structure CVBAK, and you can apply the code to set the VBAK structure fields appropriately.
    This should then populate the data on the copied order.

  • Problem with creation of Sales Order with reference to Contract

    Hi,
    I have a problem when creating Sales order with reference to Contract , shipping condition was not copied. Is there any existing copy routines suitable to accomodate this?
    Thanks!

    your functional team can help you in finding one.

  • Bapi for Delivery Creation from Sales Order

    Hi
    I have multiple sales order and i want to create 1 outbound delivery from it just like what Vl10A is doing.
    Can i have BAPI or fumctiona module for same.
    Best Regards
    Subham

    Check this thread:BAPI for Delivery Creation
    Also search the forums..there are many threads addressing the same issue.
    Regards,
    Kiran

  • Dynamic Credit check - problem -Delivery creation from Sales order

    Hi
    we have a problem which i would appreciate some help with.
    Sales order is blocked for credit and subsequently released via VKM1
    BUT as soon as line item is selected and then Sales document > deliver -
    the Dynamic credit block kicks in again straight away, no other changes have been made
    why is this occurring ?
    I managed to get round the problem by creating delivery via VL10c and selecting line item and then create in background

    Hi Tony,
    Do you have a credit check active again at Delivery level?
    In OVA8 - for the combination of credit control area, risk cat & credit group - please check field 'Number of days'.
    If you do not wish to carry out the credit check again for the released doc, here you can maintain the number of days.
    Description of F1 for this field is as below.
    Credit check: Number of days without check
    Specifies the number of days after which a changed document must be re-checked for credit.
    Use
    This function is used for checking documents that have already been released by a credit representative, but that have subsequently been changed. The system does NOT carry out another credit check if the following conditions are met:
    The value of the changed order is not greater than the value already approved for credit (inclusive of the deviation factor), AND
    The current date is not greater than the original release date plus the number of days specified here
    thanks
    Anirudh

  • Variant Matching  during Creation of Sales Order with reference to Contract

    Hi All,
    I have a following scenario. Sales Contract is created on a Configurable Material ' A' and its has a Material Variant "B" with following Charac Values X = X1, Y= Y1 & Z=Z1.
    The value of Z= Z1 is set using a Procedure when Sales Document Type = OR ( This is the Document type For sales Order). So, this means variant matching will finally happen at Sales Order creation level, coz all the three reqd. charc. are availabe  at that time.This is also our reqmt.
    But, now what is happening, a Sales Contract is created for Material A, with Charc values X = X1 & Y= Y1. When a sales order is created with reference to this Contract, immediately during Copying of selected item, Variant Matching gets triggered & Material A is replaced by Material Variant B. Even we dont get into the Configuration Window.
    Actually, during copying itself Object Depencies are called and thats leading to variant Matching.
    Our requirement is that, it should not get triggered at such early stage. It should happen when Config. window is clicked.
    Kindly help. Copy Control of Sales Doc has setting 'No Control' We are in ECC 6.0. Are there some other settigs too.
    regards,
    Stuti

    your functional team can help you in finding one.

  • VL10G Delivery Creation from Sales Order

    I am facing a problem where if I go to create delivery from VL10G, all the line items from the sales orders are transported to the delivery document EVEN when no stock is available?
    Can anyone help me out
    Thanks

    Hello Andrew,
    are the delivery items than created with 0 quantity?
    If this is the case, than you can change the customizing of the delivery item category.
    There is the option 'Check quantity 0' you have to set the value to B or C.
    Best regards, Hannes

Maybe you are looking for