Prevent parked documents from showing in Liquidity Forecast

We have an invoice scanning system in place here which usually leads to many parked invoices being created. These invoices then show up in the liquidity forecast when we would like to exclude them. Many of these parked documents need to be reviewed to ensure the amounts, accounts, etc are correct from the initial OCR scan. We would only like to see the posted documents show in FF7A.
Is there a standard way to accomplish this? Thanks in advance!

When drilling down into line item you can exclude/ fitlern them out. More seems not to be possible in standard.
Regards
Hein

Similar Messages

  • Standard DataSource to Parked documents from FI

    Hi people,
    Could you tell me what Standard DataSource I can use to take "parked documents" from SAP-FI (exemples of the transactions: FV50 to FI/GL or FV60 to Vendor  or FV50 to Costumer)
    Thaks,
    Rosana.

    Hi,
    I dont think so its any standard data source for the Parked documents in FI area. Not for the AP and AR... What is your requirements.. Parked documents usually dont extract in BI...
    I have the similar senario and looking for the solution as well.. Any ideas

  • Prevent Spry Tags from showing on page

    I have looked, but could not find a similar topic.
    My question is, is there a way to prevent spry tags from
    showing on a page when it loads or gets refreshed?
    Example:
    http://www.sothebys.com/video/viewer/
    When first coming to the page, the spry tags appear, once the
    page is loaded they are replaced by it's content. Same happens when
    the page is refreshed.
    Any suggestions?

    Hi,
    Check out this sample:
    http://labs.adobe.com/technologies/spry/samples/data_region/HideDataReferencesSample.html
    Thanks,
    Don

  • Prevent billing document from going to COPA

    Hello,
    I have a requirement to prevent a certain billing document from going to COPA. I created a new pricing condition, assigned an account key and linked this account key to a GL account. This enabled the condition value to be transferred to the GL account. In order to prevent the condition value from going to COPA, I did not assign this condition type to a COPA value field (transaction KE4I).
    However, I notice that the bllling document is going to COPA but no condition values are getting transferred. Is it possible to prevent such billing documents from going to COPA entirely (as they would unecessarily create a profitability segment)?
    P.S: This billing document was created with reference to a delivery of type LO (delivery without order reference) as we do not have the need for a sales order in this scenario.
    Thanks,
    Rugmani

    Hi
    First of all, I would like to ask you why you would not like to take this in COPA. When a revenue value is posted in GL account and you dont take a posting in COPA, it would imbalance your FI and COPA profitability...
    However, if you have rationally analysed your requirement and you would like to do it anyway, then here is the solution
    Use Exit COPA0005 and apply the following code..
    (This code is sample, based on blocking COPA doc where distribution channel = 45 and Ref Org Unit = CRMB).. You need to write your code in a way that it does not stop creating the COPA doc in other cases where it is required....
    Do thorough testing once you have this code..
    *&  Include           ZXKKEU07
    data : wa_ACCIT type ACCIT.
    if I_ERKRS = 'XXXX'. (Your Op Concern Code)
      read table T_ACCIT into wa_accit with key VTWEG = '45' AWORG = 'CRMB'.
      if sy-subrc = 0.
        E_INIT = 'X'.
      endif.
    endif.
    Regards
    Ajay M

  • Prevent Excel document from upload

    Hi all,
    How to Prevent Users uploading from excel document in a custom document library. I shouldn't use Central admin for this.

    1. Create a Event receiver as below:
    http://www.sharepointdiary.com/2012/07/restrict-file-types-in-document-library-event-receiver.html
    2. Or try Javascript:
    http://stackoverflow.com/questions/254184/filter-extensions-in-html-form-upload
    http://stackoverflow.com/questions/8938124/how-to-filter-input-type-file-dialog-by-specific-file-type
    http://stackoverflow.com/questions/4234589/validation-of-file-extension-before-uploading-file

  • Preventing AIR Windows from showing up in the taskbar

    Is it possible to prevent a normal type window from showing
    up in the taskbar? I would like the normal window systemchrome on
    my windows but want them to act like a utility type window. Any
    help is appreciated.
    Mike

    bump

  • Prevent Personal Sites from showing in search

    Is there a way to prevent the personal site from showing in search results?
    It seems to only happen for certain users
    I dont want /personal/username to appear in search results
    thanks
    themush

    Or slightly simpler, remove them from the local SharePoint content source.
    Having said this, do you really want/need to remove these results? They will only appear when a user has permission to see the files in question and those results are thought to be relevant. That's why you're getting spotty appearance of them in the results.

  • Posting Parked Documents from FBL1N List?

    Hi everyone,
    We just recently upgraded to ECC 6.0. We used to list park documents via FBL1N. Once a document was ready to be posted we could list the Park Docs on FBL1N and then the ones that needed to be posted were selected then click on the Post Document icon button. That button is now turned off. Does anyone know how to turn this button back on so that we may be able to post park documents?
    Thanks for your help.
    Dan Goodhart

    I guess you can do as below:
    FBL1N - Select parked document check box and the comapny code  as usual.
    You will get a list of parked documents.
    Select a single document and click on 'change button' (pen icon) and then save icon (POST).
    regards
    Sridevi

  • How can I prevent Podcast Maker from showing direct link to media files?

    I'm brand-new to podcasting and to Podcast Maker for Mac, but I finally created a podcast (after 3 hours of trying to figure out how to get the thing to upload to the correct sub-directory).
    My question is: When I look at my feed in Firefox, I see so-called 'media links' to all my original mp3's, as well as the links I specified to the web pages where the mp3's are embedded inside my site content.
    Is there anyway to keep those media links from showing up in the feed? If people access my mp3's directly without visiting my website, it defeats the whole purpose for me creating the podcast in the first place.
    Thanks for any help!
    Brian

    I think I may have to look into a redirect line in my htaccess file so that direct loads of my mp3's route through my website page.
    If you do this you may find iTunes won't read the files, so I should test carefully on one file first if possible.

  • Possible to prevent hidden slide from showing on "next" click?

    I am working on my first Captivate 7 project. I have created a sub-set of slides that users will be able to link to from another slide (almost like pop-up boxes). This is optional content, so I don't want to force users to view it. How do I prevent a slide from displaying when the user clicks "Forward"? I figured out how to exclude it from the TOC, but if I actually Hide the page, I can't use the Jump to Slide feature.
    I tried to set up an OnExit action to jump to another slide, but that doesn't seem to work either. I'm sure others must do this all the time? I really appreciate your advice!!

    You need to set up custom variables that track whether or not the slide should be seen.  The default value will be that the slide is NOT seen (ie 0 or False).  The On Slide ENTER event for these 'hidden' slides will execute a Conditional Advanced Action that checks the value of the variable and if it is set to 0 or False then it will jump immediately to the next slide.
    When you deliberately jump to that slide from another slide your jump action needs to be executed by an Advanced Action that first sets the value of the variable to 1 or True before jumping.  This way, when it gets to the slide the On Slide Enter event's action will see that the slide is supposed to be viewed and allow it to play.
    To clean up, you need to ensure that any way the user gets out of that same slide will also execute an action that resets the variable to 0 or False again.

  • De-cluttering tip: Is there a way to prevent a track from showing up under "Artist" while still being able to view the artist info when I play the song by Album?

    I asked this question here:
    https://discussions.apple.com/message/15312099#15312099
    It was suggested I re-post in this forum, seeing as the problem may be specific to the Touch.
    So, I have lots of "compilation" albums that include songs by various artists (for example, Pitchfork's top 500 singles of the decade). I usually select my music by "Artist," and now my ipod is super cluttered, because now I have hundreds and hundreds of artists listed, many of which I only have one or two songs by from this compilation.
    One solution: simply delete the artist information for these large compilations, and then the songs from the compilations will no longer show up under "Artists." Problem is, I would like to know who the artists are when I play the compilation (I simply don't want to have the artists listed under "Artists")
    Another solution: I could manually delete the artist info, but paste that info on to the song name. For example, a track that once looked like:
    Artist: Nirvana
    Title: Smells Like Teen Spirit
    Album: Best of the '90s
    After my editing, would look like:
    Artist: [blank]
    Title: Nirvana - Smells Like Teen Spirit
    Album: Best of the '90s
    This would solve my problem...but it would literally take hours to do for each and every individual song. Not practical.
    Does any one have any other suggestions? It seems like there would be a way to just check a box for what info you want to be listed (ie, I could un-check "Artist," and then the song would no longer be listed by Artist, even though the Artist information would still be retained for reference). Does this option exist?
    In the prior thread, someone suggested I mark it as a "compilation" in iTunes. But that did not prevent the individual artists from being listed under "Artists." Someone suggested that I may need to turn "Compilation" to "On" on my iPod. But that does not seem to be an option on the Touch.
    Suggestions?
    Thanks!!

    So, I have lots of "compilation" albums that include songs by various artists (for example, Pitchfork's top 500 singles of the decade). I usually select my music by "Artist," and now my ipod is super cluttered, because now I have hundreds and hundreds of artists listed, many of which I only have one or two songs by from this compilation.
    Why not set the iPod to show Compilations?
    In Settings select Main menu (or Music menu) and check Compilations. (You can do so for both if you desire.)
    Now all of the Artists that only appear in compilation albums won't appear in Artists.
    To get to the Artists that only appear in compilation albums open Compilations in your Main Menu or Music Menu (or either).

  • Trigger WF  when user Parks document from FB60 non-po invoice

    Hi,
    I need to trigger an approval workflow when the user parks a document using FB60.
    Here is what i have tried and it does not seem to work!!! (I might be missing something  here ..  )
    In the Triggering tab of the workflow i entered the Buisness object BUS2081 and event as parked.
    Then tried to park via FB60 does not work.
    I have never really done triggering this way before so i dont know what to do...
    Am i using the correct buisness object , do i need to create some kind of linking here ?
    WHile i am here another question.. the user will park for the first time and the workflow will trigger , what happens when the user parks it again. Do we need to handle this situation again ? How do we handle this.
    Thanks for ur responses...  i am pretty deep in this so anyone who throws a rope to me will be thanked to the maximum...

    Once you complete the customizing are you sure you are creating the invoice more than the amount you have specified in the customizing? If yes then this should work.
    I am not sure as to why you are not being able to get it right.
    The last option for you would be to find for a BADI which is called before or after the document gets committed to the database.
    Following are the BADIs that the code <b>might</b> call... No gaurantess given
    BADI_FDCB_SUBBAS01
    BADI_FDCB_SUBBAS02
    PPA_CUST_BADI
    BADI_FDCB_SUBBAS03
    WRF_PREPAY_INVOICE
    BADI_FDCB_SUBBAS04
    AC_DOCUMENT
    FI_LIMIT_PROCESS
    BADI_PRKNG_NO_UPDATE
    FM_POP_CORE
    Create an implementation and then put a break point in each of them to find out if the code calls the BADI. This is pure luck if you find one. Then you can raise the event via the function module SWE_EVENT_CREATE. Do not put a commit in the BADI initially. Only if the event does not get raised even after running the Function module then you can put in a commit. The system usually does a commit.
    Hope this helps,
    Sudhi
    Message was edited by:
            Sudhindra Chandrashekar

  • Preventing input form from showing existing record

    Hello,
    I'm creating a series of web pages to collect info from a user. On the first page, create.jsp, I have a CommandLink bound to the Create binding action. It forwards to the input form on its own page, form.jsp. The defaults (sequence number, creation date) from the model layer appear nicely in the form. If the user follows the page flow, the record is committed and everything is swell.
    The problem is that users can enter "form.jsp" directly into their location bar in their web browser, and the input page will display the first record in the table. I cannot use an authorization scheme to prevent access because any general user of the web should be able to input their info. (In other words, you can't be logged-in before creating your login.)
    How can I disable this? Or, is there a hook in the processing lifecycle that I can use to determine if a user has created a new row before displaying the input form?
    I'm using JDev 10.1.3 production, ADF Faces, ADF BC.
    Thanks,
    -Anthony

    I figured this out myself, actually this was quite simple.- just set the 'immediate' property on the component (button) to 'true'.

  • How do I prevent my document from looking like chinses when I use the pdf converter and print it?

    I print with the pdf converter. When I open the document its Chinese scribble, the whole document..

    Hi jhpjr,
    Are you converting a PDF to another format using ExportPDF, or converting a file to PDF? If you're using ExportPDF, the quality of the conversion depends on the quality of the original PDF file. Please see Will Adobe ExportPDF convert both text and form... | Adobe Community for an explanation of how ExportPDF converts files.
    If your PDF wasn't created from a scanned document, you may have better luck by disabling OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community
    Best,
    Sara

  • Bonjour issues preventing Apple TV from showing up in itunes?

    After hours of trouble-shooting and trying out pretty much every fix suggested in this forum and others to make my brand new AppleTV show up in iTunes I think I found something useful. Apple TV uses the Bonjour protocol to make itself known to other systems on the local network. A utility called Bonjour browser shows all the multicasting services on the local network..and voila, AppleTV is broadcasting and showing up in the browser on my MacBook. Issue is, with the AppleTV broadcast I'm getting a "can't resolve link-local name" error message. In fact, I'm getting that error for every device listed in the Bonjour browser. Another tool that I read about in a blog (Bonjour Conformance Test) fails to complete the test (probing failure).
    I know more about Bonjour now than I ever wanted to know but still feel completely clueless. Hey, these are APPLE products, this is supposed to be EASY Any ideas what's going on here?
    DANKE!

    I wouldn't worry about the 'can't resolve......' message, the fact that the browser application has seen the tv means that the tv is advertising it's services. Bonjour does nothing more than this, it does not enable or allow sharing, it merely advertises that a device can share.
    It might be worth checking that itunes is also advertising it's sharing properly, you should be looking for something like itunes DAAP, which is the protocol itunes uses to share its library.
    Moving on slightly, I recently did some tests and found that it is possible to stream to 3 tv's and 3 other macs from a single library, to cut a long story short, this doesn't fit in with my understanding of DAAP which limits sharing to 5 devices. My conclusion is that itunes doesn't use DAAP to share with the tv. If this is correct itunes needs to advertise another sharing service over bonjour specifically for the tv, so you should see another service advertised in the application you are using, let's say itunes-appletv, although it is likely something different.

Maybe you are looking for