Prevent Portal Application from starting

Hello.
We are having problems starting up a portal. Everytime we try to start it we have a java deadlock, and we wonder whether it is possible to prevent an application from starting.
Specifically the application we would like not to start is:
sap.com/cafeuodimnuacceap
Thanks in advance for your help.

I found it:
Using the "Initially_Not_Started_Apps" parameter in Config Tool.
Thanks.

Similar Messages

Prevent browser session from starting

I've automated the installation of a workstation using SCCM. One of the applications that is installed during this process, automatically starts an IE browser session when it's done.
Is there a way to prevent the browser from starting? I tried to kill the process after it started using taskkill.exe in a script. It kills the proces, but when i start the browser after that, it generates the message that the browser hasn't been closed correctly
the last time.
If i can't prevent it, is there a way to close the browser in a correct way?

Hi,
It seems that Internet Explorer service runs at Logon. You can use msconfig.exe to check if it's enabled under Startup and Services.
Also, you can see if it will execute during Logon with autoruns.exe.
Here is an article which may help you.
http://support.microsoft.com/kb/2837026
To kill iexplorer process, you can run such command:
Get-Process iexplore | Foreach-Object { $_.CloseMainWindow() }
Andy Altmann
TechNet Community Support

How can I prevent my iPhone4 from starting after connecting to Power?

How can I prevent my iPhone4 from starting (booting) after connecting to Power?

You can't so far as I know. You can however, shut it down after it's connected to power and it should not power back on as long as it's connected. If the power is disconnected/reconnected, it will power back on.
If you just want to avoid calls, etc. while it's plugged in, you could just put it in airplane mode.

Prevent AppleMobileDeviceService.exe from starting

Windows XP home, 3.2GHz Pentium 4 processor, 4 GB RAM, Dell Dimension 5150
Since starting to use an iPod, AppleMobileDeviceService.exe starts every time I start iTunes. This process takes a tremendous amount of resources to run (50-75% of CPU). I usually go into task manager and kill the process.
How can I prevent this process from starting when I start iTunes?
If this service is not running, how can I start it manually when transferring music? Or does it automatically start when an Apple device is detected?

generally you may access your PC's services by going start > run > and type "services.msc" without the quotations.
Locate the "AppleMobileDeviceService.exe" and right click > properties > change the drop down box from automatic to Manual, then click the "stop" button if you want to stop it.
I have a theory that this might be triggering the iTunes to continuously reopen itself if using wifi sinc.. have you experienced any issues with this?
:::edit:::
I don't *think* the service will start itself when you start iTunes, but i could be completely wrong. On the contrary, if you've disabled the service and then try to sync and nothing happens then you know that's your problem.
Worth playing with.
Also as a further FYI, it's easy to get carried away with disabling services and what not, once you're in you realize it can really improve a boot up process/overal computer functionality, but i encourage you to research what each service does before disabling. surely you thought about this already, though 8)

Copying instant portal application from onemachine to another machine

Hi,
In my first machine I have installed Oracle Application server 10.1.2.0.2 and upgraded Portal successfully to 10.1.4
and I created a Portal Application using Oracle Instant Portal.
now i have the same scenario of Application Server 10.1.2.0.2 along with its repository and Portal installed on my second machine and also upgraded Portal successfully to 10.1.4
Now how can i backup the Portal Application that i created in my first machine and install and run it in my second machine.
what i want to know is can we copy a Instant Portal application from one application server machine into another application server machine without having to re-create the entire instant portal application?
Can someone guide me please.
Thanks,
Philip.

Actually we are not mapping machine name something in webutil.cfg file. We just need to specify the path that from where we will transfer the file from application server to client. And the time time of transfer the path you will
choose for client webutil will transfer the file on that location automatically.
-Ammad

Windows 7 "a patch is preventing the system from starting" error code 0x490

I have a Windows 7 machine.
It was working fine.
Now it will not boot.
When I try system repair, it says:
Root cause found
A patch is preventing the system from starting.
Repair action: System file integrity cheack and repair
Result: Failed. Error code 0x490
I have tried doing safe mode, last known good configuration etc and nothing works
Also, I tried to restore to an early checkpoint, but it claims that none exist, even thought I know we save restore points.
Please advise?

"I suggest running Command Prompt from the repair menu and then Check Disk:
1. Insert the Windows 7 Disc and boot from it.
2. In the recovery menu, choose Command Prompt .
3. Type the following command and press Enter:
Chkdsk /r /f
Please also try the following commands and press Enter at the end of each line:
Ren C:\Windows\winsxs\pending.xml pending.old
Ren C:\windows\SoftwareDistribution SDOLD
Regedit.exe
When the register editor opens, please navigate to the following key:
HKEY_LOCAL_MACHINE\COMPONENTS:
* High light the COMPONENTS key. Please check if the following values exist in the right pane:
AdvancedInstallersNeedResolving
PendingXmlIdentifier
* If so, please right click on them and choose Delete them. Confirm the operation.
* Restart the computer."
Quote from : Vivian Xing
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/227bcd32-f0dd-4aab-942e-07e0cadec083

How to develop portal application from scratch

Hi,
I am on the process of evaluating sun one portal server in windows environment.
currently i am planning to develop some sample portal application from scratch.
can someone help me how to go about in this with some reference materials/links.
Thanks and Regards,
Senthil

portal application means
1- portlets (portlet logic + portlet view)
or
2- channel + provider (original Sun portal components)
have a look at
http://docs.sun.com/app/docs/doc/819-1370
additionally you can develop JSR168 portlets in combination with JSF straight with Sun Creater 2
which is currently available as a free beta version
cheers
/ulf

Every time I restart my mac air some applications like calendar and Microsoft word automatically starts, how can I stop such applications from starting when ever I restart my mac

Every time I restart my mac air some applications like calendar and Microsoft word automatically starts, how can I stop such applications from starting when ever I restart my mac?

One thing to check: when shutting down or restarting, there is a checkbox in the shutdown/restart dialog which asks whether you want currently open applications to open at startup.
charlie

FYI: TrendMicro antivirus prevents Transport Service from starting after installing Echange Server 2013 Service Pack 1

I installed Exchange Server 2013 SP1 in my test environment. After that mail flow between internal and external mail servers completely stopped. In the end I discovered that Transport Service on both of the mailbox servers refused to start (or, to be more
exact, stopped shortly after starting).
The following events appeared in the System event log:
Event ID 1052 (error)
Source: MSExchange Extensibility
Message: Failed to create agent factory for the agent 'ScanMail SMTP Receive Agent' with error 'Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll'
due to error 'type not found'.'. Please verify the corresponding transport agent assembly and dependencies with correct version are installed.
Event ID 16023 (error)
Source: MSExchangeTransport
Message: Microsoft Exchange couldn't start transport agents. The Microsoft Exchange Transport service will be stopped. Exception details: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'. : Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'.
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
Event ID 701 (informational)
Source: MSExchangeTransport
Message: The service will be stopped. Reason: Microsoft.Exchange.Transport.TransportComponentLoadFailedException: Loading of component 'SmtpReceiveAgents' failed. ---> Microsoft.Exchange.Transport.TransportComponentLoadFailedException: The agent component
failed to load. ---> Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to
error 'type not found'.
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
   at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.RunADOperation(ADOperation adOperation, Int32 retryCount)
   at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.TryRunADOperation(ADOperation adOperation, Int32 retryCount)
   at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
   at Microsoft.Exchange.Transport.Components.Activate()
The reason for that behavior was TrendMicro ScanMail for Exchange 11. Seems that it was unable to work with the new SP properly and prevented the entire Transport Service from starting. Uninstallation of the antivirus eliminated the issue.

Actually, you can just disable the agents until TrendMicro releases a patch and then enable them again:
http://community.trendmicro.com/...
BTW, a similar problem (high CPU utilization and services not starting) is hitting the AVG package:
http://forums.avg.com/..
Step by Step Screencasts and Video Tutorials

100% thread pool/CPU usage prevent MII Applications from working

Hello to all,
our MII Applications were running on MII 11.5 (windowsserver 2003, with IIS) without any problems.
We migrated these MII Applications to SAP xMII Version 12.0 SP8, SAP NW 7.00 SP20, Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_22-rev-b03, mixed mode).
Since then we faced several problems that prevent the MII Applications from working, e.g.
- 100% application thread pool usage rate
- 100% CPU usage
- awful lot of http connections
Several sap support calls didn't find the root cause.
Workaround: restart sap system weekly
Does anyone has any idea how to go on?
Thanks
Simone

Hi Mike,
sap support told us to install this Java version.
Furthermore SAP Note 716604 says "do not use J2SE 5.0" and "Currently, we recommend 1.4.2_24 b06".
Any more ideas?
Regards,
Simone

Help needed on upgrading portal application from sp3 to weblogic portal 10

Hi Guys
I have an application which is currently running on BEA Weblogic Portal 8.1 sp3. We need to upgrade our application from 8.1 sp3 to BEA Weblogic 10 version.
(1) Is there any way for upgradation from 8.1 sp3 to portal 10 directly or do I need to upgrade it from sp3 to sp4 and then from sp4 to portal 10? Pls clarify?
(2) How reliable are the BEAs automated scripts for retaining the personalization/customization of my application on sp3 to upgraded version i.e portal 10?
(3) I believe, we do not need to do any coding/design changes/architectural changes into my application for this upgrade.
Any help on this will be highly appreciated
Thanks
Jameel

1) I believe only sp4 and later to weblogic 10 is supported (http://www.bea.com/content/news_events/white_papers/BEA_WL_Portal10_ds.pdf)
so yes i think you need to upgrade from sp3 to a later version of the service pack
2) You tell us :)
3) Depends on your application and the features you have used. E.g. I believe Content management has changed between sp3 and what 10 supports.
regards
deepak

Call a Portal Application from WebDynpro

Hi experts,
i hope you can resolve my problem!
My intention is to refresh the browser and call the first page of the portal after the portaluser pressed a button in an WebDynpro application.
For this purpose i create a portal application with an JSPDynPage and an JSP how call the JavaScript Method "top.location.reload();".
My question:
How can i call an portal application in a WebDynpro onAction Event?
Thanks,
Florian

1)Creat one action method "ReactPortalEventing" with the parameter dataObject and write the code in wdDoInit method as
//the urn and method name like "sendEvent" both should be same
WDPortalEventing.subscribe("urn:com.abc.practice","sendEvent",wdThis.wdGetReactPortalEventingAction() );
2)and in the action method display the name as
wdComponentAPI.getMessageManager().reportSuccess("Event value"dataObject);
also chk it
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60d7d690-0201-0010-e581-9c4fc69cec0e

Kiosk: how to prevent an application from being minimized? (WinXP)

Hi,
I have a desktop application that runs full screen, using opengl, for a turnkey kiosk on Windows XP. I'm having this strange problem with the app minimizing itself as soon as it launches. Here's the scenario:
1. boot
2. auto login
3. app launches
4. app minimizes itself to the taskbar
5. developer gnashes teeth
When the app is re-maximized, it runs fine and doesn't do this again.
When it's launches normally (not from the startup folder) it behaves fine.
When you just log out and log in, it behaves fine - this is only exhibited on first boot.
This wouldn't be a big problem but the app is for a turnkey museum kiosk with no mouse or keyboard, so it needs to launch and run smoothly without any user interaction.
The issue's described well by another developer here:
http://processing.org/discourse/yabb_beta/YaBB.cgi?board=Integrate;action=display;num=1156614434
(I'm using Processing).
This behavior doesn't repeat with other applications, only with fullscreen, opengl java applications that I make in Processing.
I've tried the workaround in the above thread (running an external window control app as a subprocess in response to the focusLost() event, which works but not reliably for me.
Is this behavior something that has to do with Java? Has anyone else seen this before? How do you normally go about making kiosk-type applications in java?
thanks for any suggestions ...
--ben

Yes, I put a shortcut into the startup folder (Documents and Settings/default/Start Menu/Programs/Startup) or whatever it's called.
I tried Fullscreen and Normal, neither one made any difference. The app does run fullscreen, it just gets minimized shortly after launch. Sometimes it minimizes immediately, sometimes it waits a few seconds and then minimizes.

How to prevent one application from touching the in use Environment?

Hi, all,
I have an application opening an Environment and using it well. However, this application may have multiple instance in our system. Once another instance touches the environment it will destroy the former's environment.
My question is how to detect one environment which located in a fixed directory is being in use? If we could detect this, we can prevent the latter instance from touching the environment then.
Thanks in advance.

There are DB_CREATE and DB_EXCL flags for DB_ENV->open function, if you specify the OR of them both, you will get what you want: only create the environment if it is not created.
On the other hand, multiple applications can join the same db environment if their configuration to the environment is compatible; if you are sharing an environment handle, use DB_THREAD in DB_ENV->open, see this for using Berkeley DB in multi-threads: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/mt.html

Calling Portal application from current webdynpro java application

Hi Experts,
We are having Portal 7.4 SP6 framework.
Application-A -> Web-dynpro java program pushing data into R/3 using BAPI.
Application-B -> Std. WD-ABAP iView template.
Currently, I am working in web-dynpro java program, where I am pushing some data into R/3 using BAPI in Application-A. And this BAPI data is getting displayed in another z-Tcode and displayed in portal using web-dynpro Abap iView template, which is Application-B
Now I want to align this application, so that Application- A should call Application-B from within the WD-Java framework. And here Application-A should get closed and open application-B.
Is there any standard process using Web-dynpro Java to handle such scenario.
Regards,
Hanif

Hi Siddharth,
Well, I think you can go for Portal Navigation concept.
Please check the required source code in WDR_TEST_PORTAL_NAV Web Dynpro component. That will illustrate both Page based Navigation and Object based Navigation.
Hope that should solve your problem.
Regards
<i><b>Raja Sekhar</b></i>

Prevent Portal Application from starting

Similar Messages

Maybe you are looking for