Prevent RAWs from creating JPGs in iPhoto

Is there a way to prevent iPhoto from creating a JPG file when imported? I have the "don't make a copy" prefrence selected but it still creates a JPG. This is creating a memory issue for me because the RAWs are around 25-30MB and when imported into iphoto it makes another 5-10MB JPG.

No - iPhoto creates a JPEG for use in viewing and editing and for other programs to access - and note that turning off the copy imported items to the iPhoto library is strongly not recommended - it makes importing and deleting photos more difficult and makes relocating the originals (adding an external drive - replacing failed hardware - upgrading hardware - etc) much more difficut
You may want to consider solutions other than iPhoto since it does not operate the way you want to
LN

Similar Messages

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

How do I prevent Lightroom from creating duplicates if the edit in photoshop is not saved?

Hello!
How do I prevent Lightroom from creating duplicates if the edit in photoshop is not saved?
So... Quite often I choose to 'Edit in photoshop' from Lightroom but then end up not saving the result. (for example, because I just wanted to experiment with the photo, or I'm not satisfied with the results)
However, Lightroom always creates a copy of the original photo, which stays in the catalog even if the photoshop changes aren't saved.
Is there a way to stop this, and only add a photo if it has been edited in PS?
Using LR5 with PS CS6 on a Mac 10.9
THANK YOU!

Select 'Open the Image in PS as a Smart Object'. The image will be rendered by ACR in memory without being written to disc until you save it from within PS.

How to prevent user from creating jobs

Hi,
we need to prevent user from creating jobs on a dev enviorement. It's a 10.2.0.4 database standard on linux 64bits.
Their schema has only connect and resource roles. Is there a way to prevent them from creating jobs? In 11g it's the CREATE JOB permission, but in 10g i'm not sure how can i do this.
Thanks for any ideas!

On 10g it's probably the CREATE JOB as well.
http://www.oracle.com/pls/db102/homepage
Alternatively you could:
alter system set job_queue_processes=0
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams089.htm#REFRN10077

How to prevent users from creating new folders in share folder directory?

Hello guys
I'd like to know How to prevent users from creating new folders in share folder directory but still keep their power of creating new folders in their personal 'my folder'?
I tried changing the 'manage privilage ---- create folder' to deny certain user accounts, but by doing so, it also stops the user from creating new folders in their 'my folder', which is not good..
I also tried going into these share folders and tried different access types such as 'change/delete', 'read', 'traverse folder' etc, but none of it work ideally. The 'change/delete' access still allows them to create new folders, 'read' access prevents creating new folders but also take away their power of saving reports..
Any thoughts on how to take away their ability to ONLY create new folders in share folder areas without affecting their other privileges?
Please advise
Thank you

Easy, on the shared folders root folder only give them 'read' or 'traverse folder' but on the the folder inside the shared folders root folder give them 'change/delete'. That means they can change anything inside those folders but not create any folders at the shared folders root level.

How to prevent users from creating transactional problems?

Dear Sirs...
Using JDeveloper 10.1.2 and ADF UIX technology. If i created a web application that contains many pages. Assume the application contains pages A,B,C,D.
The end user should access the pages A then B then C then D to get the transaction executed and commited correctly.
the problem is:
1- if a user navigates from A to B to C then he press the Back button to A then he commits the transaction, the data would be stored in correctly.
2- if page C requires some preparations in page B (initalization of session variables) and the user enters page A then he changes the URL to C, then this would cause inproper execution of application and so the data would be stored incorrectly.
so how can i prevent the user from pressing the back button of the browser (which i do not think is possible) or how can i prevent him from making any errors by inproper page navigation?
thanks for any help in advance and best regards

I really don't know if this is the correct way of doing it, but we prevent navigation directly to any page within our application if the HTTP Referer header is null. If it's null, we redirect to a page that says the user should use the navigation buttons provided and not enter the page via bookmarks, history, or direct navigation via a typed in URL.

Sales Order - Prevent user from creating more that one schedule line

Hello,
Is it possible to prevent users from adding lines (rows) in the schedule line tab of VA01/VA02 ? Our requirement is that one item will have one only schedule line, the quantity cannot be split into different dates.
Regards,
Joã

Hi
There are 2 schedule lines with different dates for a single line item in a sales order because of forward scheduling done by the system
System does backward scheduling first and if it fails then it does forward scheduling and that is why you find 2 different schedule lines
In configuration you can restrict the system to do only backward scheduling and stop after that
I am not infront of SAP now to tell you exactly where is the configuration available
I think it is Logistics execution--delivery scheduling
But This config is definately available in standard system to avoid 2 or more schedule lines for a single line item in a sales order
But i am not able to understand what is the business logic for such a requirement because i feel it will create a lot of problems
with this requirement
Regards
Raja

Adding an "IMAQ Image.ctl" to the "Display State.ctl" of an XControl prevents LabVIEW from creating a probe of "Display State.ctl"

I am working on an extended IMAQ Display control using LabVIEWs XControl capabilities.
I need a copy of the original image passed to add some overlays which must not affect the original image. To achieve this I am creating a backup image in the "Init.vi" and deleting it in the "Uninit.vi". I am storing the reference of this image in the "Display State.ctl" which is part of every XControl.
As soon as I am adding an "IMAQ Image.ctl" to the Display State cluster, it is no longer possible to generate a probe of the Display State cluster for debugging purposses. I am always getting the message: "Failed to load or create probe."
Deleting the "IMAQ Image.ctl" from the cluster makes the probe working again.
Is it a bug or am I doing something wrong?
I am working with LabVIEW 8.5 and Vision 8.5.
Regards
Ingo Bartsch

Hello Mr. Bartsch,
is it possible for you to post a small example to reproduce the behaviour? It would be helpful to get a description in which way you use the typedef files.
I found a example/knowledge base where some informations were included to XControl and LV but not with Vision.
http://digital.ni.com/public.nsf/allkb/1DC1ADD2A136DA298625712C00635758?OpenDocument
Best wishes
Jan Kniewasser
Jan Kniewasser | Applications Engineer | Tel.: +49 89 7413130 | Fax: +49 89 7146035

Is there a way of preventing q10 from creating PC contacts

I use gmail contacts as Imap in q10
When I sync these with my outlook, BB creates a separate list called PC contacts
So under contacts I have:
1. All
2. Favorites
3. Groups
4. BBM
5. Gmail
6 PC
I actually wnat only one list, I want to remove all the others, favs, groups, bbm, pc
Why cant I have only 1 list?

Maybe this post (there is also a link to a Youtube tutorial) can clarify:
Why choose Standard over Simple action? - Captivate blog
Although this was written for CP6, everything is also valid for CP8

How do I prevent Photostream from creating empty projects?

With photostream on, it creates a project labelled "Nov 2011 Photo Stream" that is empty. I don't remember creating this project, but I can't swear that I didn't. I delete the project, but everytime I reopen Aperture, it is recreated. If I turn photostream off within Aperture, this behavior stops. Turn photostream back on in Aperture, the zombie project comes back.
How to stop this?

But why does it keep coming back? I understand if the current month is recreated again, but we are in January 2013 and I have Aug, Nov and Dec 2012 that keep reappearing, even though I've already moved the photos to other projects and deleted them.
I can only assume at this point its a bug, but do you have any other ideas on kiling it without having to disable the auto import?

How to prevent Spaces from creating a new session after logging out

Hi,
I'm using WebCenter Spaces (11.1.1.4), and I notice that the user is redirected to the landing page after logging out which causes a new HTTP session to be created. I'd like to avoid this behavior, and I was told that this could be done by creating a custom logout page with pure HTML and redirect the user there upon logout. How do I go about doing this? I couldn't find anything related to this in the documentation.
Thanks,
Robert

What's wrong with a new session?
When you logout, the current session will be destroyed so it's just normal that he creates a new webcenter that does not contain a user credential.

User policies prevent MMS from creating snapln-modules

I have uninstalled mcafee virus program and after that I'm not into fierwall or administrative tools due to user policy refuses MMC to create snap-in and ask me to
contact the administrator who is me.I can not get into something or do some things. error messages is:CLSID:FX(b05566ac-fe9c-4368-be02-7a4cbb7cbe11) and CLSID:(58221C67-EA27-11CF-ADCF-00AA00A80033) please help

Hi,
Please try following steps to check the issue:
1. Navigate to the following directory:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\CONFIG
2. Copy the 'machine.config' file to desktop just in case before you go to 3rd step.
3. Rename machine.config to machine.config.old which is locating in the directory above.
Since this issue can be caused by corrupted system files, please run following command to scan system:
SFC /SCANNOW
Considering that the corrupted .net components will also cause this issue, please also try to remove and reinstall .net framework:
.NET Framework cleanup tool now supports .NET Framework 4.5 and Windows 8
http://blogs.msdn.com/b/astebner/archive/2012/08/04/10336934.aspx
If this issue still persists or any error message after SFC, please upload the saved event log, CBS*.log and full error message here for further research.
Kate Li
TechNet Community Support

How do I prevent CS4 from creating HTML files on export of an image?

Everytime I export an image i am getting a html file created too. It is annoying having to delete them manually every time, and there seems to be no option to turn this feature off.
Generally I dislike CS4 compared to Macromedia Fireworks v8.

You need to select "images only" in the dialogue box when you choose Export
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

How to prevent Nemo from creating ~/Desktop

Every time nemo is executed, it seems to automatically create the ~/Desktop directory. How could I disable this behavior? I'm using i3wm.
Last edited by pikaren (2014-11-17 15:32:24)

drcouzelis wrote:
They're called XDG user directories. You can learn about them here:
https://wiki.archlinux.org/index.php/Xd … irectories
http://unix.stackexchange.com/questions … top-folder
XDG_DESKTOP_DIR="$HOME" solved this issue for me. Thanks!

Prevent Passcode From Being Set

Hi all --
My younger brother keeps setting a passcode on his iTouch and then forgets what it is. I have had to restore the iTouch several times now. Is there a way to prevent him from creating a passcode?
Thanks in advance!

No there is no way to prevent him from setting a passcode or even removing it. What you can do is that YOU can set a passcode which you will remember and then when he forgets, he simply asks you. Now, for whatever reason he keeps changing the passcode then he is going to have to remember or it is RESTORE again as you have done in the past.
Axel F.

Prevent RAWs from creating JPGs in iPhoto

Similar Messages

Maybe you are looking for