Prevent requisitioner field (EBAN-AFNAM) from PR to be copied to PO in ME59

Hi,
Is it possible, throught customizing, to prevent the content of requisitioner field (EBAN-AFNAM) of PR to be copied to PO when converting the PR to PO via ME59?
Thanks for your help in advance.

hiiiii
According to my understand, if creat PR with some ABCD as requisitioner .
If u refer the same PR while creating PO , it take the PR requisitioner to PO also..
IF any thing more u want more clarification letus know

Similar Messages

Requisitioner EBAN-AFNAM in Purchase requisition

Hello,
we have automatic preqs generated by MRP. They have a certain value in the field EBAN-AFNAM. Normally when releasing the Purchase req this field changes into the username of the user who released it. But this doesn't work anymore! Can someone tell me where is this setting?
Thanks a lot

Hi David ,
Have u done any development towards changing the field ?
As such in standard it will not change .
The field description of the field AFNAM clearly states the following - Press F1 against the field in ME53N ( Indicates for whom the material or external service shown in the purchase requisition is to be ordered.)
Also do check the change log of PR in ME53N by cicking Environment- Item Changes for earlier PR.
Regards
Ramesh Ch

Make Requisitioner Field OBLIGATORY in ME51N.

Hi All,
In Transaction ME51N and ME52N I want to make REQUISITIONER field Mandatory.
for that I Chanegd the Attribute of the field AFNAM from screen 3328 of Function pool MEGUI to REQUIRED.
In the preview of the screen its showing that field as Obligatory but in the Transaction ME51N and ME52N it is not reflected as mandatory.
Can someone help on this please?
Regards,
Tejas

I hope you are making mandatory in SE51 Layout ->doble click on field as keep as obligatory.
but somewhere it is changed from mandatory to regular field ,look at code and somehwhere they written loop at screen.
try to write down in PBO as
loop at screen.
if screen-name = ur field name.
screen-input = '1'
modify screen.
endif.
endloop.
Reward Points if it is helpful
Thanks
Seshu

Required F4 help for Requestioner(EBAN-AFNAM) in ME51N,ME52N & ME53N

Hi Experts,
Need F4 help for Requistioner(EBAN-AFNAM) in Tran. ME51N, the system is ECC 5.0,
How can i meet my requirement., kindly revert back <removed by moderator> if u have solution for this.
Regards,
Niranjan.G
Edited by: Thomas Zloch on Jun 21, 2010 4:35 PM

Hi,
There are 2 possibilities.
For these you need to get the Access key.
One is just create the search help and assign this search help to this field in the screen attributes.
Second one Just create the POV for this field.
With Regards,
Sumodh.P

Purchase order field EKPO - AFNAM displayed in any standard report?

Hello gurus,
I can't find any standard report which contains in the layout the field Requisitioner (EKPO-AFNAM) of the Purchase Orders.
Can you please advise if there is any? Do I need to make a query between EKKO and EKPO to get this field displayed together with the PO number?
Thanks!!
Marc

Hello,
@Venu, dynamic selections would allow me to have this field in the selection screen but not in the layout of the report (which is exactly where I need it).
@Antony, you're confirming my fears; there is no standard PO report which contains the Requisitioner field in the layout. I know ME5A does include it, but it doesn't include the Purchase Order number as it is Purchase Requisition related.
@All, any other suggestion besides the query? Are we missing something?
Best,
Marc

How to prevent middle names and titles from appearing in contacts

My iPhone is syncrhonised with MS Outlook, and I've used Outlook as my system of record for contacts for many years. I have hundreds of contacts in Outlook, many of which contain middle names and titles.
The problem is that the iPhone displays every contact as Title FirstName MiddleName Surname Suffix. For many of my contacts, particularly when viewed in the Favourites list, I can't even see the contact's surname because the contact's title, first name and middle name(s) take up so much of the row.
How can I stop my iPhone from displaying titles and middle names? Is there a setting somewhere in iTunes that will prevent these fields from being transferred to the iPhone?

@NFH
I am also experiencing this problem, but I think it started with one of the later iOS 3.x releases or possible iOS4. All of my contacts display their job title (eg. "Senior Vice President of Worldwide Sales & Operations") which given the screen real estate means that NONE of the actual Contact name is visible.
This is only happening on my iPhone 3GS (iOS 4.0.2) and does NOT happen on my Mac, my me.com, nor on my iPad (iOS 3.2.2). Which, again leads me to believe this problem was introduced in iOS4.

Can the MTM Test Run 'build number' field be unhooked from a real build without using a fake or empty string.

I'm working on integrating MTM Test Runs (Via TFS/MTM API) with our automated build & test system, and I've noticed that if I supply a valid build number when creating a test run, and I later delete the build, the test run data disappears with it.
I know that I can deselect 'Test Results' in the Delete Build dialog, and in the Retention Policy for the Build Definition, but in the interest of avoiding any confusion or mistakes (we have a lot of build definitions to maintain), I wonder if it would be
possible to instruct the test run to prevent a deliberate link.
While we're on the subject, if anyone could explain the benefits or potential uses this link might provide (even under conditions that may not meet our usage) I would be very grateful.

We don't use MTM to run tests, we have another system that works better with our test environments. We will be using MTM to track pass/fail data for the tests that have run, by creating test case workitems for them and using test run and test result objects
to store the data.
Going back to my question, I'm looking for a way to prevent a test run object from linking to a TFS Build so I can prevent TFS from removing the test run when I delete it. We have a lot of builds and we frequently remove old ones, I need a way to retain
historical data for test runs.
I understand that under normal circumstances, the build number would first be used to retrieve the bits from the build to test with, but since we're not using that system, I'd like to know more about how it might be used in other ways - for example, for
querying or associating work items. We're considering not using this field, or modifying it in such a way that it doesn't create the relationship with a build that I mentioned, and I would like to know what functionality we would lose by doing this.

Requisitioner field in Purchase Requisition

Dear All
When Purchase Requisitions are created from MRP directly, the requsitioner field is filled in with MRP controller Name
But when Planned orders created from MRP are converted to Purchase Requisition by MD15 or through MD04 then requisitioner field is filled in with the user id who does this conversion. Business have a concern here , they would like to have MRP controller name filled in this case also.
Is there any possibility that MRP controller name is filled as Requisitioner when Purchase requisition is created from Planned order also ?
Please let me know your thoughts on this.
Regards
Shyam

Hello
You can use BAdI MD_PURREQ_CHANGE to define the desired valud for this field.
Check this document for more details about the BAdIs available on MRP.
BAdIs for MRP
BR
Caetano

Requisitioner field in PR has to be populated through APO run

Hi all
The requisitioner field in PR is mandatory for the user.
There are 2 ways by which PR is generated:
1) Manually:Whoever is creating the PR, fills the requisitioner field.
2) Through APO run: The requisitioner field is not getting populated (and as such PRs are not getting generated).
The requisitioner field in PR needs to be populated (automatically or manually) when the PR is generated through APO run.
Please advice how this can be achieved.
Thanks
Prasad

I am assuming you are talking about the field on R/3 side. You should be able to use CIF user exit to populate the requisitioner field with the SNP Planner ID from APO while moving the req from APO to R/3. SNP Planner ID is a field at Location Product level

Requisitioner field in PR to be populated through APO run

Hi all
The requisitioner field in PR is mandatory for the user.
There are 2 ways by which PR is generated:
1) Manually:Whoever is creating the PR, fills the requisitioner field.
2) Through APO run: The requisitioner field is not getting populated (and as such PRs are not getting generated).
The requisitioner field in PR needs to be populated (automatically or manually) when the PR is generated through APO run.
Please advice how this can be achieved.
Thanks
Prasad

I am assuming you are talking about the field on R/3 side. You should be able to use CIF user exit to populate the requisitioner field with the SNP Planner ID from APO while moving the req from APO to R/3. SNP Planner ID is a field at Location Product level

Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address

Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address when I use a "send this" link on a webpage/news article. The email window opens and automatically inserts my old Hotmail address instead of the Yahoo address I've used for a long time. (The drop-down won't let me change it or delete it.) Thanks.

Do you get a drop down list with suggestions if you clear that "from" field and click elsewhere on that page to move the focus off that field and then double-click again in that field or start typing the first letters of that unwanted email address?
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/
*Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

MissingFieldException[ The following required field is missing from the lau

Hi, I'm new to this forum so please put this thread in the right place if I have made a mistake.
But here's my problem:
I'm using jre 7 with the latest version.
I downloaded and wanted to launch a Java based .jar game, which runs perfectly for the other users but my JRE gives the following error:
Application error - unable to launch the application.
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
     at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main.access$000(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
On the forum where is the game developed i got the following answer:
''+it seems your OS/jre installation tries to start the jar as an applet which fails, because it's a regular application and not an applet. is there any way you can convince your jre to start LS as an application? i would like to give better/more detailed advice, but i'm not running windows, so i can't check for myself/try to work out a step-by-step guide.+ ''
As I have browsed the internet for hours and haven't come up with a solution I'm asking for some help.

That error seems to indicate that the JNLP file is broken because it is missing the starting starting <jnlp> XML tag; I'll take a guess and just say that it is completely empty. Since it works for other users, apparently somehow when you download it on your computer you end up with a broken file. No idea why, no way for me to know why either. I don't have access to your computer. All I can say is: try in another browser and if that doesn't work, try on another computer. If it works there, well then you may have to face the fact that your computer might need a clean install.
And PS: this is a Java programming forum, not technical support for whatever game you want to play that just happens to use Java.

How to add the Match code object for the requisitioner field in TCODE ME51N

Hi,
How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
Please do the needful to me.
Regards
Rajesh

don't you think that posting your question to a microsoft developer site would be more efficient?
regards,
anton

How can I prevent my new Mac Air from freezing in Safari

How can I prevent my new Mac Air from freezing in while using Safari?

Hi nainmom,
Thanks for visiting Apple Support Communities.
I recommend starting with these steps if your iPod nano is not recognized by your Mac:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

Prevent requisitioner field (EBAN-AFNAM) from PR to be copied to PO in ME59

Similar Messages

Maybe you are looking for