Prevent saving movie from wiki

I would like students that have an IEP to access audio versions of my tests. I have created a blog that only allows those students access. When I copy the audio file to the blog entry and it loads in the browser window, there is a triangle on the right side of the movie controller. When I click on it, it will allow me to save the file as Source or Quicktime movie. I would like to prevent the users from saving the file as Source or QuickTime movie (for security reasons). Is there a way to do this?
Thanks for your efforts in advance.

Burn the iDVD project to disk which creates a video DVD that any PC capable of playinhg commercial video DVD will be able to play.
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Similar Messages

  • Why does it take so long to download a saved movie from the cloud

    Why does it take so long to download a saved movie from the cloud

    Hi first off if your running  fcp 7 with compressor 3.5 and fcp x and compressor 4 on the same drive you may run into problems
    as you now have a mix up between Qmasters  which caused me lots of problems when i did any back ground Rendering via compressor of FCP-X
    i had to completly remove compressor 3.5 and compressor 4 then put compressor 4 back on again  as the shared rendering out of FCP-X seems to loose the plot with both versions on the same on the same drive there is an app
    Here
    http://www.digitalrebellion.com/fcsremover/
    which you can get allows you to get rid of certain bits of FCS and FCP-X correctly as you may know deleting the app is,nt the whole story as you need to remove the pref etc as well
    but its really clearing out every thing to do with qmaster thats is the thing here thats what causes all the issues
    really you should follow apple install instructions for FCP -X install ( and put it on separate volumes ) and i know they say there is a way to get every thing working on the same drive ...but it did,nt work for me like you i had massive render times and that 3x crash error
    any way
    once i had remove done my remove C3.5 ,C4 and reinstall C4 only it worked straight away from FCP-X using all the cores on my machine
    get some thing like istats or run activity monitor to make sure Fcp-x is using all your cores to render and you can actually see if its doing anything at all instead of waiting 5 hours for an error
    if you want to use multi core in compressor 4 you have to go into the new apple qmaster tab  and setup up a quick cluster etc
    On another note i alway use Optimized media when doing the import as while you editing its back ground render every thing into pro res making it a much nice codec to compress down to H264 which you need for the ATV
    i hope that helps a bit ,some else may have a better solution but worked for me
    thanks
    G

  • Prevent Captivate movies from autoplaying

    Hi I wonder if you can help. I would like to prevent my Captivate movies from automatically starting when the page loads. For accessibility reasons it is always better to allow the user to control video so that users of screen readers do not get confused by an unexpected voiceover.
    However I don't want to re export all the Captivate movies and was wondering if there is a quick fix I can do to the code like autoplay="false"?
    Thanks for your help
    Steven

    Under Preferences > Project >  Start and End > Untick the box for Autoplay.

  • Saving movie from website

    How do I save a movie from a website? I have the link and permission to do this.
    Thanks

    I can see the video, but it won't let me download it. Activity window shows no .flv file large enough to be the video, and using the plugin for Safari to download .flv files says there's no .flv at all. Firefox with a extension to download videos gives a small window with names of .flv files, but none of them are for the video in question.
    I can get the music video from YouTube, but the interview portion isn't included.
    Mulder

  • How can I prevent shows/movies from auto-downloading?

    Hello,
    I'm looking for a way to keep my iTunes purchases from using up several hundred gigabytes of hard drive space, and I'm really confused about how to go about doing that.
    Let me give an example of the problem:
    After I purchase a movie, I'll let iTunes download it and then I'll watch it once. After that, I won't really have any reason to watch the same movie again for a few months or even years. In the meantime, it's just sitting there taking up hard drive space.
    Since the iTunes store has already logged my purchase of that movie, shouldn't I just be able to go download that file whenever I feel like it, and delete it from my hard drive when it's not needed?  I think that's a pretty logical approach, and it's kind of the whole point of having all of the media hosted on a central iTunes server.
    This is how a lot of other digital media distribution services work - for example, the Steam platform for video games. You can download a game and play it whenever you want, and just delete it when you're done. You can always re-download it later. I figured that iTunes would work the same way.
    However, if I delete an item from my library, then iTunes seems to cosntantly want to automatically download it again. I guess I could just perpetually pause the download, but that seems odd. I want to just delete the file for now - I can always download it again later.
    I experimented with disabling the "Always Check For Available Downloads" button, but when I do that, I'm not sure how to manually start downloading files that I want.
    Any ideas?
    Thanks and Best Regards,
    Brett

    If it's gmail, go to their website and look for the "recent" feature.
    Otherwise, and I'm assuming this is IMAP, it's just doing what it's supposed to do; showing you what is on the server. Your best choice is to go to the email provider's website, put messages you don't need to see into their own folder(s) and don't subscribe such folders in Thunderbird.
    If it's POP then a new account in Thunderbird doesn't know what you've seen before, so simply gets it all. Beware, it will almost certainly be '''moving '''all the messages from server to client, so don't start deleting things just yet. The "other folders" technique described for IMAP should work here too, as POP doesn't see folders on the server other than the Inbox.

  • QT& PRO and saving movies from the Quaylernet

    Just purchased Qt Pro so I could save trailers etc. from the internet.
    1) Where in the QT menu/ screens/ about/ info or anywhere else does the program identify itself as "Pro"? Mine doesn't, so maybe my reg key didn't go thru? If not, skip question 2).
    2) If I'm okay on 1), how do I save, specifically, starwars.com QT trailers? I tried a post that suggested using Firefox with page info to find an embed with a .mov extension, which I did but couldn't save it as a .mov. My system changed the extension to .html. Again, maybe my Pro key didn't register for some reason.
    Could really use an emoticon for hair being pulled out...

    If your registration "took" the Preference Pane is the only place your see the word "Pro".
    The QuickTime Player should now have the word Pro removed from all menu options.
    I'm not signing up to enter Star Wars site so I don't know the formats they use for playback. You should be able to use the disclosure triangle at the right end of the movie controller to save. If it's not present then the page code uses the kioskmode="true" tag.
    You need to copy the URL from the page source code (begins with http and ends in .mov). Paste that link into the QT Player Open URL dialog window and wait for the file to download completely. Then use the Save or Save As menu to keep a local copy of the file.

  • New iOS preventing saving images from yahoo mailbox to photos

    Since iOS 7 I can no longer touch to save image on any attached yahoo pictures in my email. I can click "save image" but when I go to photos I do not have the photo. This is true of the ipad and iPhone. I have looked under privacy and photos, but there is no way to enable yahoo mail to access my photos for saving to them as most apps do. Please help!

    Since iOS 7 I can no longer touch to save image on any attached yahoo pictures in my email. I can click "save image" but when I go to photos I do not have the photo. This is true of the ipad and iPhone. I have looked under privacy and photos, but there is no way to enable yahoo mail to access my photos for saving to them as most apps do. Please help!

  • Saving Video from a Sony Handycam HDD - I'm stuck in iMovie ****!

    We foolishly bought a Sony Handycam HDD video camera last year, thinking we could save our movies to DVD using the computer.
    I can do it using the laptop we got my daughter for Christmas, but this isn't really feasible. My G4 has iMovie 3.0.3. and even though I recently upgraded to a 2Ghz processor, I still can't install the iMovie I bought with iLife '08 2 years ago.
    I need to be able to save files from my Sony handycam to my computer and burn DVDs. Or even if I could just burn them without saving, that would be fine.
    I have heard that I need StreamClip from Apple and I see that I need to buy Apple MPEG-2 converter first and then I see in the feedback category for that product, everyone who gave it bad marks was trying to do what I'm trying to do. Then I read somebody recommended Quicktime Pro...
    I'm completely confused..and frustrated!!!!
    Is there a version of iMovie that will work for me even though I just have a plain old 2Ghz processor?
    Would Quicktime Pro or some other software do it for me? I don't mind paying $30 for some software that I'm only going to use for saving movies from camera to DVD, but I'd rather upgrade iMovie if that was possible.
    thank you.
    (I'll come in off the ledge now...)

    Hey. This is a really good question because I too have run into video problems with mine. After a couple of years I couldn't stand it anymore so I sprung for a MacBook Pro for myself this past Christmas. When I say video problems I mean I can't watch a DVD, a video on the net, etc. It's a pain.
    But I still haven't given up on it. Currently it's just used for storage. Did that processor upgrade make any difference for you? I've been looking into that upgrade along with an upgrade to Leopard on the Quicksilver to see if it can handle the video.
    We bought a Panasonic video recorder and have a G5 (pardon me but I don't know the processor speed). Even that computer wouldn't recognize the video files stored on the recorder and refused to import them. I called Panasonic and they explained I needed iLife '09. (Currently on the G5 there is '08 and it is running Tiger.)
    What you might want to do is a couple of simple upgrades. First the OS to Leopard and then upgrade your iLife to '09. I can say that the camcorder works like it should with iMovie '09 just like the rep at Panasonic said it would.
    Hope this helps.
    Frank

  • Stream movies from my computer using home share to apple TV (gen 3) is using up my internet down load allowance?

    I have been using Apple TV (gen 3) to stream movies from my computer using Home Share but found my internet down load increased, I have read online forums which all say they don't think the home sharing uses your internet down load but when I played a movie then paused and unplugged my cable from my router I was unable to continue streaming the movies which tells me I am using internet down load. Can I use my Apple TV to stream already downloaded and saved movies from my computer to Apple TV without using the internet?

    Sorry diesel, to amswer your question: I am selecting "Computers" from the ATV which inturn streams the movies from the iTunes on my computer.
    If I unplug my internet cable from the router I am unable to continue streaming the movie? this tells me that it is using my ISP internet to stream, I have checked all my settings but can't see anywhere that would make it stream direct from my router to ATV.
    Just can't work it out???

  • Under Tools, Options, Security; how do I add a site to the "exception" box to prevent a password from being saved?

    I would like to add a site to the "exceptions" box under "tools", "options", "security". This is to prevent the computer from saving a password for that site.

    Some sites (like and others) like PayPal, Yahoo, Windows Live and bank sites use ''autocomplete="off"'' to prevent Firefox from saving the name and the password.
    If a site uses ''autocomplete="off"'' then look at this article for a bookmarklet to remove that autocomplete attribute.
    http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
    http://kb.mozillazine.org/Password_Manager
    See also http://en.wikipedia.org/wiki/Bookmarklet

  • Prevent iPhoto 11 to import movies from NAS

    Hi,
    after a small update erlier this week (in Denmark), my iPhoto 11 suddenly import my movies from iTunes library, and other movies saved on my NAS, automatically and put them in "events".
    It´s not the small homevideos/iPhone-movies from Photo Stream, but movies I bought from iTunes store and DVD-rip. iPhoto shows them in a very bad quality, and I really don´t need movies to "fill up" my iPhoto-library.
    I also have my iPhoto library on my NAS.
    Somebody knows how I can prevent this?
    Best Regards

    For starters yoou need to get the iPhoto library off of the NAS - you will continue to have strange problems until you do - the iPhoto library must be on a volume formatted Mac OS extended (Journaled) - it is possible to put a properly formatted disk image on the NAS and use the iPhoto library from it but it is a bit of a pain - a local properly formatted drive is better
    As to the errant import - not sure - I've not seen that reported and iPhoto does not automatically import anything - at best it opens when it sees a camera and you choose to import or not and can select what to import - my best guess is user error but no way to be sure without more information
    I do not think that having the library on the wrong format drive would do that - but maybe - it does cause strange problems
    LN

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

  • Saving quicktime movies from internet

    i used to be able to choose file,save as & whatever quicktime movie i had viewed & chose to save would end up in the proper place. now, i go through all the same steps & the movie/file gets saved but when i try & open i get an ALERT:
    QuickTime cannot open the file: "01.mpeg"
    it is not a file that QuickTime understands (-2048).
    is there an easy way to save movies from the web anymore?

    i didnt need it before. i think it all changed the last QT update i ran. HELP feature said to ckick down button on player, did that & yeah, it looks like it leads me to a purchasing link. thanks for your time. i guess all i can do is save as a bookmark & wait for it to load when i want it.

  • How prevent movie from loading completely before playing?

    Hi,
    how do I prevent an swf from loading completely before
    starting to play in the browser? When simulating a download in the
    Flash application, several preload stages work perfectly, but not
    in the browser. Preload stages don't appear, instead it takes ages
    for the 3.5 mb file to completely load before displaying the first
    frame of the movie.
    I have tried inversing the load order in export settings and
    different flash versions, but just can't get it to work.
    Can someone help? Thank you!

    hi kglad
    I thought it should be that way; the point is that I don't
    want to add code that loads the entire movie before starting to
    play the first frame, but only a certain number of frames (i.e. 11
    out of 35, for example). I'm trying to do this with this code in
    the first frame:
    ifFrameLoaded (11) {
    gotoAndPlay("start");
    in the simulation, it works perfectly, but when uploading the
    movie and viewing it in html, the entire thing loads, and the
    preloader doesn't appear.
    Many thanks for your help.

  • Preventing a movie clip from resizing

    Hello:
    How can I prevent a movie clip from resizing while continuing
    to allow the main movie to resize.
    If this is impossible to do, knowing that would also be
    helpful information.
    Thank you in advance for any assistance offered,
    MyMorgaine

    Make an Album of the Photos and Videos and put them in the order you want. Then make a slideshow of that album.
    Regards
    TD

Maybe you are looking for