Prevent Text Boxes to shrink as big as the text in it - move existing InfoPath form from SharePoint 2007 to SP2013

Hello Together,
we have some simple InfoPath forms in place. With SharePint 2007 they are working well. Now we will move to SharePoint 2013.
It was easy to re-publish them on a SharePoint 2013 Site and to work with, but i have an optical / technical error and i don't find the solution.
We use Text Boxes to collect the data from the user. After the user has filled the form we will submit them via mail.
I will you show you the problem.
on SharePoint 2007 --> it looks okay
on SharePoint 2013 --> not okay - the Text Box is shrinked to the text Size and the design is defect
How can i prevent this?
Thanks in advance
Sebastian
I can provide Screenshots, bit at the moment my account is not verfied...

Can you please share screen shot.
Before try removing the field form View and Add it again - check it
Velu K

Similar Messages

How to link a text box to an anchor frame in the master pages?

Ok, as the title states, we are trying to figure out if it is possible to link a text box to an anchor frame in the master page. When you look at our Master Page layout, we have a text box in the upper left hand corner of the left hand page, this is used for our machine serial numbers. Then we have an anchor frame that automatically fills out the figure number. Let's say I have pages 2 & 3 (left & right), they have a S/N at the top of the page for the machine, then pages 4 & 5 have a different S/N. If I have to add more pages in between pages 2 & 3 (bumping the current 4 & 5 to 6 & 7), the anchor frame bumps to the next page, but the S/N text box doesn't. Is there a way to fix it so that they both move to the next page? Thanks for the help.
P.S. I can include images and other info if needed.

I have included a two pictures that should help me explain.
Master Page:
This is the master page set up, the "Page Text Box" has the flow set to "B" while the S/N text box has the flow set to "A". This setup is for our parts manuals, the left page is usually an illustration while the right page is usually a parts list. The text box, anchored frame & paragraph tag are empty in the master page set up. The "page text box" has a flow of "B" and the "S/N text box" has a master flow of "A".
Body Page 1:
When we create new pages, the paragraph tag automatically fills in the figure title on the left page, then we add an anchor frame within the text box to hold the illustration. You will notice that I added in a "test" serial number at the top of the page. Now if I need to go back and add two pages before this, the anchor frame, illustration and parts list will move to a new page, but the S/N text box will not. The "Before S/N TBD" would stay on the original page.
This is what happens, the text box containing the illustration and the parts list "bump" to the next page, but the S/N text box does not. So the question we have is there a way to link that text box to the page so when we create new pages the S/N text box moves with the illustration.
Does this help?
Thanks for the assistance Error7103.

I have photoshop cs3 on a mac powerbook running Os 10.10.2 I am getting a" licensing has stopped working" text box. I can reinstall because I can't get a copy of CS3 from eh website

I have photoshop cs3 on a mac powerbook running Os 10.10.2 I am getting a" licensing has stopped working" text box. I can reinstall because I can't get a copy of CS3 from eh website

https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Inline Text Boxes getting converted to inline tags on text reflow in parent

Hi,
We extract text from a text box in a Indesign CS3 document. The text box can have inline text boxes. The text of the inline boxes is extracted as well.
The text extracted from all the text frames is processed in an xml and processed. After processing, it is reflown into the boxes.
When we try to import the text in the parent text frame having inline boxes, the inline text boxes are converted to inline tags.
Can we keep the inline text boxes as it is rather than they getting converted to the inline tags.
Thanks.

Hello Harbs,
Thanks for the reply. By recreating the boxes, do you mean to say that we draw the boxes again and place them in the main text frame as an inline box.
But the problem again is that if we attach the xml element of the parent element to the text frame, it will flow all the contents including the inline boxes which will be again convert them to inline tags.
Or is it that we flow the parent text and then look for all the inline tags and draw boxes in place of these tags. But the question here is how do we differentiate between an genuine inline tag and the one which is converted from an inline box.
Can you help in describing the solution in your mind.
Thanks

When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box, for a specific area on the page...instead of it going on in one straight long line...?

When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box on a specific area of the page...instead of the text box going on in one straight long line....? I'm not seeing there's an option or ability to do so, just wanting to confirm.

Improving the handling of multiple line text fields is in our plans, but for now, you will have to add manual carriage returns (Enter).
Thanks,
Josh

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

Even simpler than that.
Clicking once in a text box selects it.
Clicking once in a selected text box places the insertion point in the box.
The clicks do not need to be close enough in time to be read as a double click.
The same behaviour applies to table cells in Pages and in Numbers.
Regards,
Barry

In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height

On the iPhone, if you move an e-mail from the In box to Junk, will iPhone automatically place future e-mails from the same sender into Junk? In other words, can you teach iPhone to recognize Junk as you do on a Mac?

On the iPhone, if you move an e-mail from the In box to Junk, will iPhone automatically place future e-mails from the same sender into Junk? In other words, can you teach iPhone to filter out Junk as you do on a Mac?

I don't think so, you would need to set that on your browser when you log into your email account.

I can no longer see the gray "suggested text" boxes when I type an email or text message. How do I restore this function?

I upgraded my phone to the latest operating system a few days ago. I really like the gray suggested text boxes that appeared when typing an email or text message. That function has stopped. How do I get it back?

Make sure you have "Predictive" turned on (green) in Settings > general > Keyboards.

How do you put rules around a text box ina pages layout template? The inspector tab seems to allow rules on top, bottom or both, but not on all four sides.

How do you two format facing pages to appear as a single page for a photo spread?

It seems you have one question in the title and another in the post.
1. Select the text box. In the Inspector palettes Graphic tab choose Stroke. You can chose Line or Frame.
2. See this discussion Double Page Spread?

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

I downloaded the new version of firefox, now my flash player wont work, the html text box is gone and so is the back and forward buttons. please help??

I downloaded the new version of firefox, now I cant watch any movies, the html text box is totally gone, and so is the back and forward website buttons, please help? can i just have the old version back?

Not sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
* FirefoxButton -> add-ons
** see [[Find and install add-ons to add features to Firefox]]
** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
* also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html

Text on path: How can I calculate the text length?

Hi
I have a text on path (spline item). Now I need the length of this text and the length of the spline item.
I try to calculate the text length using IWaxLine::GetWidth(), but this is always 0.
- How can I calculate the length of this text?
- How can I calculate the length of the spline item?
Thanks
Hans

It would be interesting if you could describe the purpose of your "length", but I don't have an answer anyway. Would the bounding box be sufficient?
Considering that TOP may be combined with arbitrary spline paths, this could become an exercise in higher math. I haven't yet encountered a function that returns the mathematical length of such a spline.
Otherwise it could be solved if you iterate and sum up the relevant points of the bounding box (ascender, descender, baseline?) of individual glyphs.
Be warned that the whole TOP looks alien, as if it were a transplant from a different program. Experience also shows that documented and actually used interfaces / commands are completely different animals ...
Dirk

How do you print from the text (multiline) option so that all of the text is included?

I'm trying the trial version of formscentral and have made a form. In this form I used the text (multiline) option. I saved the form as a pdf and filled it out to test it. When I go to print the form the only text that appears is what's visible on the screen. How do I print the form so that all of the information is depicted?

This is something we are working on fixing but in the mean time what you can do is one of two things :
1) make the multiline fields taller so that it would fit all the text in the responses.
      You can do that by going to the Desing Tab and dragging the bottom right corner of a multiline text fields to make them bigger.
2) print the Detail View instead.
      From the View Responses Tab go to View > Detail View.
      Select the response you want to print
      Press on the printer icon at the bottom of the Detail View.
      This will print the data in a name/value pair format.
Gen

I have one contact that i have been texting for months. About 5 hours ago, when I send a text I get an error message that the text couldnt be sent. However, when I send a picture with a text message, then it goes through to the contact. Why am I getting

I have one contact that I've been texting for months, about 5 hours ago, I started receiving an error that the text was not sent. However, if I text a picture and then text with the picture the message goes through. Why am I getting this error?

You can also try out few things >
1) check if the ipod constantly appears in mycomputer section .
- if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
you can try
http://docs.info.apple.com/article.html?artnum=304508
The best way to check whether the ipod is faulty or the computer is creating the problem is,
connect the ipod to a different computer which has itunes on it(If possible)

Prevent Text Boxes to shrink as big as the text in it - move existing InfoPath form from SharePoint 2007 to SP2013

Similar Messages

Maybe you are looking for