Prevent the A.P from associated to each other

hi, I'm a newbie in wireless. Is there anyway or cisco link that can help me to prevent my A.P from associated with other A.Ps beside from Mac filtering.

If I understand the question...You have an Access Point Associating to other Access Points? How are you determining that they are associating to each other and not just identifying each other as neighbors? What are the AP's you are using? Are you using Lightweight or autonomous? An AP should only associate to another AP if you set the AP to Bridge mode, which I do not believe is the default.

Similar Messages

Can I stop the Officejet 6000 from calibrating after each print job?

Is there a way to prevent the Officejet 6000 from calibrating after each print job? The process is loud and prolonged. The print quality is fine but it makes too much noise. I have not seen an answer to this in any forum. I hope one of the pros or expert can help.

This servicing will occur after every print job. There are no methods to stop it or decrease its cycle time.
I was an HP employee
If I have helped you solve your issue please mark this post solved.

When inserting a checkbox, how can I prevent the note box from appearing?

To all,
After -reluctantly- "upgrading" from Acrobat Pro 7 to Pro X I find this new version absolutely maddening.
Pro 7's features were easy to find in the tool bar. Now in Pro X everything is "dumbed down" with everything "nested" into each other...
But I whine and digress from my problem:
QUESTION:
When inserting a checkbox, how can I prevent the note box from appearing?
With every insertion of a checkbox onto a form, a "notebox" appears.
Thank you,
Matt

As you can see, when I add a checkmark to a page/form, a "note" is automatically added also. In my old Acrobat v. 7, this did not happen.
Any ideas on how I can set Acrobat Pro X to NOT include this note?
Thank you,
Matt

HT3406 If I choose "restore from iTunes backup" to move everything from old phone. Will I still be able to use the old phone for music and apps? Can the old phone be docked up to the computer? Or will the new and old phone overwrite each other in some

If I choose "restore from iTunes backup" to move everything from old iphone to a new one, will I still be able to use the old phone for music and apps? Can the old phone be docked up to that same computer every now and then? Or will the new and old phone overwrite each other in some way? In other words, are the two phones treated as different devices when the "restore" option is used to set up the new phone? Thanks in advance.

Yes, you can use the old iPhone as an iPod touch.
Read this:
http://support.apple.com/kb/HT3406

Photoshop CC 2014 - "Could not complete your request because something prevented the text engine from being initialised".

This problem has just started, only with CC 2014. It doesn't happen with CC or CS6.
When I open a particular layered file, then Duplicate it, then close the original Master file I get the "text engine" warning box when I try to enter text in the copy file.
If I enter text in the original Master file - no problem.
If the Master file is still open and I try to enter text in the copy file - no problem.
I've validated all my fonts in Font Book, deleting all the duplicates and one corrupt font. No change to problem.
I've gone to User/Library/Application Support/Adobe/Adobe Photoshop CC2014/ and trashed the CT Font Cache folder. No change to problem.
I've run PS Update.
Running OS 10.9.3.
Any suggestions?

I'm having the same issue on my work computer. I found this info in Adobe's help section.
Issue
When you use the Type Tool, you receive the following error:
"Could not complete your request because something prevented the text ending from being initialized."
To the top
Solution
Close Photoshop, clear the font cache, and restart.
Exit Photoshop.
In Windows Explorer, navigate to the Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CC/CT Font Cache folder.
Move these two files to the Recycle Bin:
AdobeFnt_CMaps.lst
AdobeFnt_OSFonts.lst
Empty the Recycle Bin.
Restart Photoshop.
To the top
Additional information
This issue can occur after you uninstall and reinstall Photoshop several times.
Text Engine error using type tool in Photoshop CC | Windows 8

Error: prevented the text engine from being initialized

I am getting the following error when attempting to use the text tool with my photoshop (12.0) - windows 7.
"could not complete your request because something prevented the text engine from being initialized"
I've attempted to follow some posts from others to fix without success.
There are two fonts in my fonts folder that are shortcuts - and the fonts don't exist in the folder. Also, I can't delete the shortcut font from the fonts folder.
(I'm posting this now... and might have a solution. Just in case, I want this conversation started.)
TIA,
Greg

Usually that means that you have a corrupt font or a corrupt OS font cache.
See this document for more troubleshooting steps: http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
Also, make sure you have all the Photoshop updates installed.

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.

Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.

Have you tried Windows Update in the Control Panel?
Many times it will find the newest supported drivers for Hardware.
Just be sure to install everything not just the Important ones.
Let us know if this helps.

Prevent the next message from being automatically selected when deleting?

The information on this page (Mail (Yosemite): Delete messages) doesn't work for me:
"Tip: To prevent the next message from being automatically selected (and marked as read), hold down the Option key when you delete a message."
The next message still opens up.
Anyone know what to do here?

Hi,
not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
Sorry, if there are now 2 answers.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

Is there any way to sort the alarms differently in the Clock app? I have alarms for multiple days during the week, all of which overlap each other. It makes no sense to me that the alarms sort by time and not day. Thanks!

Is there any way to sort the alarms differently in the Clock app? I have alarms for multiple days during the week, all of which overlap each other. It makes no sense to me that the alarms sort by time and not day.

No, there is no way to change the sort order.
Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

When World it be able to log on to The same pages document and see each other corrections When you write/type Them.

When will it be able to log on to The same pages document and see each other corrections as soon you write/type Them?

Then use Google Docs if it does what you want.
MsOffice and LibreOffice are also coming to the iPad, we shall see what they have to offer.
With luck neither will use iCloud. Apple has yet to get anything right in networking.
Peter

How to strongly protect the step types from being modified by others?

how to strongly protect the step types from being modified by others?

Hi Jacky,
You can make a property of a step uneditable by changing the property
flags for the step. First, you want to be able to view the hidden
properties so that you can change the flags for these properties as
well. You do this by going to Configure>>Station Options
and selecting the Preferences tab. Check the box for Show Hidden
Properties. Once you have done this you can select the step type
from the types palette. In the window to the left, you can expand
the tree for the type to see all the properties of that step.
Right click on the property that you do not want users to be able to
edit, select Properties. Then click the Advanced button.
Here you will see a list of the setable flags. Check the box for
PropFlag_NonEditable. You can then do this for all the properties
of the step that you do not want users to edit.
Thanks,
Caroline Tipton
Data Management Product Manager
National Instruments

HT203164 I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/

I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well, which I used before for this exact thing w/no problem.

Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked!

How to prevent the Firefox cache from clearing -- all settings are right, but the cache is gone after each restart.

I want to prevent cache from being deleted after each restart. "Clear history when Firefox closes" is unchecked. User.js files are deleted. Checking "Override automatic cache management" made Cache folder appear in addition to Cache2. After exiting Cache is still there, but upon Firefox re-launching, Cache turns into Cache.Trash and promptly disappears. What to do?

Hello,
I'm sorry to hear that. Can you please try these solution to address your concern.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Prevent the A.P from associated to each other

Similar Messages

Maybe you are looking for