Prevent the dock to move from one screen to another.

I have two external monitors connected to my mac and every some time the dock moves to the bottom of screen one (where all my destop icoms are located) to monitor two (no icons). How I can fix this. I want my dock in the same place all the time.

System Preferences, Mssion Control, uncheck "Displays have separate Spaces".

Similar Messages

I have 2 screen and the dock is changing from one screen to another , can I stop it (Mac OS 10.9.1)

Hello , I have 2 screens , and the dock is moving from one to the other screen at any time .
I would like to "paste" it on one screen
How should I do?
Thanks for your help

Hello there, BHDock.
The following Knowledge Base article explains how the Dock works in Mavericks:
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Working with the Dock
When the Dock is configured to appear at the bottom of your screen, it's available on whichever screen you’re working on. Just move your pointer to the bottom of either display. When the Dock is configured for the left or right position, it appears on the leftmost or rightmost display edge.
The Dock settings are located in System Preferences.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Why the menu to move from one page to another is not seen when the page is online?

On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
why the menu to move from one page to another is not seen when the page is online?
Thank you,
Roger.

Where are you publishing and how are you uploading the files?

Xorg freeze when my mouse moves from one screen to another :/

Hello,
I have a computer with two graphics cards nvidia:
- GeForce 7300 SE/7200 GS on a PCI Express port
- GeForce FX 5200 sur on a PCI port
I use 3 screens:
- 2 on PCI Express card, one on the DVI port and one on the VGA port
- 1 on the VGA port of the PCI card
I configured my BIOS for my motherboard that has an integrated chip to boot the PCI Express card. I configured my xorg.conf to have a TwinView display mode on my two screens of the PCI Express card and to have the screen on the PCI card separately.
1 week ago my setup worked great, no worries. Since I rebooted my PC, when I slide my mouse from the PCI Express screens to the PCI screen my xorg freeze and I can't switch to a console with ctrl + alt + F1. My PC is still available in SSH but can't kill the Xorg process with a kill -9. I had to make 2 / 3 update between two reboot, I think it must come from there: surely a problem with a kernel update or nvidia driver update ...
Here I am lost, I do not know what to do to rectify the situation. If someone has an idea ... I'm taker
The only mistakes I saw in log that could be related:
error.log - kernel: pci 0000:04:05.0: BAR 6: address space collision on of device [0xfd000000-0xfd01ffff]
log xorg
Call Trace:
[<ffffffff81254723>] ? vga_get+0x113/0x170
[<ffffffff8104e1e0>] ? default_wake_function+0x0/0x20
[<ffffffff812549b0>] ? vga_arb_write+0x230/0x510
[<ffffffff81114dd8>] ? vfs_write+0xb8/0x1a0
[<ffffffff81114fae>] ? sys_write+0x4e/0x90
[<ffffffff81012ecb>] ? device_not_available+0x1b/0x20
[<ffffffff81012082>] ? system_call_fastpath+0x16/0x1b
INFO: task X:1552 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
X D ffff88007f733c30 0 1552 1 0x00400004
ffff88007f733c30 0000000000000086 ffff88007e03bdb8 ffff88007100383f
ffffffff8141f589 ffffffff8141f587 ffff88007eb00d60 ffff88007e03a000
ffff88007f733ed8 000000000000f908 ffff88007f733ed8 ffff88007e03a000
Call Trace:
[<ffffffff81254723>] ? vga_get+0x113/0x170
[<ffffffff8104e1e0>] ? default_wake_function+0x0/0x20
[<ffffffff812549b0>] ? vga_arb_write+0x230/0x510
[<ffffffff81114dd8>] ? vfs_write+0xb8/0x1a0
[<ffffffff81114fae>] ? sys_write+0x4e/0x90
[<ffffffff81012ecb>] ? device_not_available+0x1b/0x20
[<ffffffff81012082>] ? system_call_fastpath+0x16/0x1b
Thanks in advance.

I'm suddenly having the same problem. Find a cure yet?

Using PgDn key on eBay browsing screens results in a 2-step jerky display to move from one screenful to another - this problem is not apparent on other websites

This problem has been apparent for some time in Firefox and has not been fixed in version 22. The scrolling using PgDn key works smoothly in Internet Explorer.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Also try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Why the screen flickers and moves from one app to another by itself without being touch?

Why the screen flickers and moves from one app to another by itself without being touch?

Have you tried a reset to see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4528 how do i move an icon from one screen to another on my Iphone 5?

How do I mov an icon from one screen to another on my Iphone 5?

Tap and hold an Icon until they begin to shake. Move the Icon towards the edge of the screen and hold for a couple seconds. The Icon will then "jump" to the next screen.

TS3274 How do I move icons from one screen to another?

How do I move icons from one screen to another.

Hold down on one icon until they start shaking, then drag the icon to the edge of the screen, and the screen should slide to the next one, you can then drop it on that screen or drag it again to the edge to move to the next screen.
Page 21 of the user guide explains this under Arranging Apps:
http://manuals.info.apple.com/en/ipad_user_guide.pdf

I can't move an app from one screen to another screen

I can't move an app from one screen to another screen

You've got the apps shaking by pressing and holding one of them for a second or two ? If you have then you should be able to drag an app (not too quickly) and then hold it so that it overhangs the edge of the screen, and after a second or so the display should switch to that next/previous screen. Is that not working ?

Is there an easy way to move multiple icons from one screen to another?

I have multiple screens on my iphone 5c display. I want to move multiple icons at the same time from one screen to another. Is there a way to do this?

You could put them all in a single folder and move the folder to another screen.

How to move tabs from one screen to another?

Just started to group tabs. How can I move tabs from one screen to another to consolidate them into the groups?

See Tab Groups (new in Fx4) (Panorama) [http://support.mozilla.com/en-US/kb/what-are-tab-groups What are Tab Groups] (video included)
From one Window to another Window, by drag & drop
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use

try restart
http://support.apple.com/kb/HT1430

HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

Hi Elaine
Here si what I do:
Since I tend to message with teh same people I leave the messages available to me. If you are in one conversation with "Karen" and want to message with "Kathy" tap the message back arrow and select Kathy.
As always just be careful to rememeber who you are messaging to!

Prevent the dock to move from one screen to another.

Similar Messages

Maybe you are looking for