Prevent values being passed using Link Item on Web Application Designer

Hello all,
I have a question regarding 7.0 Web Application Designer. I am using the web item Link Item and using the command OPEN_TEMPLATE_DIALOG to open a new WAD Template BUT I do not want to pass the values from the original WAD template to the new one. Is there a way to restrict passing any values to the new template? Am I using the correct command OPEN_TEMPLATE_DIALOG?
To better describe what is happening, my characteristics and key figures are being passed from my original WAD template to my new WAD template when using the OPEN_TEMPLATE_DIALOG. I do not the values to be passed, only to open up the new WAD Template with its own reports.
Thank you.

Sorry maybe I mistated the problem. I do not have an issue with the variable screen when transitioning to the second WAD template screen, I have a problem due to the values from the first WAD template being passed to the second WAD template.
My first WAD template using the Link Item is only for the ability to click on the text to open up a second WAD template which I do not want the values to be passed from the First template.
I hope this clears up the confusion.
Thanks

Similar Messages

  • How to create own Web Items for Web Application Designer

    Hi all,
    is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
    Is this possible?
    Or ist there any possibility to get the Web Item's data by an interface?
    Any support is welcome...thanks in advance!
    Best regards,
    Dominik

    if you want to create your own webitem check out the link given by other sdner.
    if you want to be able to execute BW query using abap you can check out the following weblog.
    /people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
    Regards
    Raja

  • WEB application designer - Web items - How to create new

    Hi!
    Is there a way to create new web item in web application designer, and <b>NOT</b> a copy of existing with different parameters (Web items located under Standard tab).
    It would expand possibilities of web app. designer a lot!
    Another question is, how to use BSP elements in BEX WEB reports (templates). Is this possible or not?
    Thank you in advance!
    Egi

    Hi,
    in principal you can write new web items but this is not supported by SAP as this is a modification.
    You would inherit from a standard web item class (for example CL_RSR_WWW_ITEM_VIEW) and maintain tables rsrrenderer rsrrendereratr rsrrenderert and optionally rsrrendererdep
    BSP itself can not be used, unless you include a BSP Application via Iframes in your Web template.
    Heike

  • URL link in rows/colomns of a report web application designer.

    Hi,
    I would like to create a URL link in a report which jumps to documents on livelink.
    For example:
    1.  bw    30.000    www. google.nl
    2.  sap   40.000    www. sap.com
    3. basis  50.000   www. nu.nl
    etc.
    etc.
    Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
    Thanks for your help en replies.
    Rishma.
    Edited by: R. Debi on Oct 7, 2010 11:20 AM

    I used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
    In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document.  SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
    Thanks a lot,
    Rishma

  • Web Application Designer - Chart (Bar Chart) - Value description of chart

    Hi Community,
    i use the Web Application Designer in BW 3.5 to create a bar chart with the chart web item (Bar chart). Everything works fine - but in the query the values are 10.000.000  and much more. The description in the chart lokks like  10000000  - Nobody can handle this information in the chart - i could not change the values in the ODS. Is there a possibility to show only steps in 1.000.000 in the chart. In the chart description it should look like 10 and the in a text "in billion".
    Is the chart designer in the WAD possible to habdle this ? Hope you have a solution

    After applying IGS patch. It is resolved.

  • Web Application Designer broadcast select Web Items

    Hello all,
    I have a request to use the broadcast only select web items, Chart/Analysis items only in a Web Application Designer Template. Is this possible? I've tried the option "Data Binding"  Report [ITEM_REF] but that didn't work and brought everything in my Web Template in my PDF broadcast to Email. It seems to ignore the Data Binding and bring everything in the template, pictures, Charts, Analysis items. Can anyone tell me if it is possible to select only select web items to broadcast via PDF?
    Thank you in advance!

    Found it:
    - New Button
    - Action = Command
    - Commands for DataProviders/ Hierarchies / SET_HIERARCHY

  • To use Web Application Designer release 2004s do we need to have portals???

    Hi
    I would like some clarity regarding whther we need a portal or not.
    If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
    Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
    "Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
    So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
    Thanks in advance

    YOu neeed BI Java configured
    If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
    answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
    For more insights - FAQ
    Pls read carefuly should answer all your current and future questions.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
    Hope it Helps
    Chetan
    @CP..

  • Security for creating web templates using web application designer

    I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
    The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
    Any help would be greatly appreciated.
    Jeff Ehritt
    925 827-6012
    ChevronTexaco

    Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
    The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
    Thanks,
    Jeff Ehritt
    ERP COE SAP BW Security

  • How to use Swing in a web Application

    Can you suggest me some good PDF/tutorial or some good site for reading about using SWING in a Web Application.
    In our web application we plan to use JSP/Struts for the presentation layer. However there are a few screens that require some advanced UI like color coded assets and a graphical version of Outstanding Vs Available limit. We are wondering whether we should use SWING for these screens. Do you think this is a good idea or is there a better apprach to deal with this
    What are the disadvantages of using SWING VS JSP/Servlet in a Web environment. Is there a site or pdf where i can get information about this.

    I'd say the biggest disadvantage is that your client machines have to download and install the bloody java plug in.
    What you write about your UI ain't half vague. What the deuce is a "color coded asset"? Is it
    interactive? If not, could it be represented by an image? If so, even if it is a non-static image, it is a simple
    matter for your webapp to generate the image on the fly. Many web app tutorials demonstrate that.

  • What GUI to use web application designer in BI 7.0 without support package

    I use BI in my ECC 6.0 system.
    I use tried both GUI 7.1 and GUI 6.40 to logon web application designer.
    But system display the message please logon to a Netweaver BI 7.x system. System A11 does not have a mimumium version required 7007.
    My system seems to be 7000, so what GUI is suitable to use for WAD?
    Thanks
    Giang

    Hi,
    It could be problem with either Support package which you are using for BI or Front end patch which you need to install for GUI.
    please check with minimal installations and let me know with current support package and FEP you are using.
    Regards
    Suresh

  • Web Application Designer uses wrong server name

    Hello,
    I am using BI under NW04s.
    When I execute a web template in Web Application Designer it opens up the url with the server name without it's FQDN name and than I get: "URL used, <URL>, is invalid; distributed session management (DSM) cannot function. See SAP Notes 596698 and 654326.
    I've looked at these notes but I don't see how it can solve my problem.
    I've already followed the suggestions in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=279031">this</a> thread including checking RZ10 and RSPOR_T_PORTAL table.
    Any other ideas...?
    Roy

    Hi,
    try maintaining parameter <b>icm/host_name_full</b> in SMCIM (goto/parameters/change).
    hope this helps...
    Olivier.

  • Use Map In Web Application Designer

    Hi gurus:
         when I create map in Web application designer ,it shows the error:
    Messages:
    Internal error communicating with the IGS (maps)
    Map could not be Created
    But the map can be shown in Analyser,please help me!
    thanks

    Hi,
    please tell more about your scenario.
    Are you using dynamic attributes?
    Are all layers visible?
    Did you check the query that you are using as Dataprovider? 
    Is there only one geocharacteristic in the row?
    Which infoobjects are you using and which shapefiles?
    Best regards
    Andreas

  • I'm trying to see how I can disable the referer value being passed when I go to another website. How can I do this?

    I'm just looking to block the referer url from being passed to the next website i go to. Is there an option to do this?

    You won't be able to post on this forum if you disable the referrer, so be warned.<br />
    On other sites you may be missing images.
    *http://kb.mozillazine.org/network.http.sendRefererHeader

  • How to use linked filters in webi reports.

    Hii.. all
    I want to know how can i  use related or linked filters in webi reports.
    that means if i am using three diff filters as f1 for Zone f2 for location and f3 for sales office
    then if have selected a zone from the zone  filter (for ex west) then the location filter should show only the locations which comes under that zone and the third filter should show only those sales offices which comes under the selected location from the filter..
    Plz help..
    thanks

    hi Neeraj,
    1. In Universe Take Storename, city, State, region, Country objects
    2. Double click on Storename, go to properties tab and click on edit button. Query panel will open.
    3. Double click on city and click on sort button, double click on state and sort it, double click on region and sort it, double click on Country and sort it.
    4. If you want to keep any condition like particular country, you can drag country object in to the Conditions pane.  If not leave it empty.
    5.Click on Save and close button. Save the universe and export it.
    6. In webI drag and drop the Storename object and click on 'Add Quick Filter' button.  Now all the columns you included in the list of values appear in the Add Quick Filter dialog box.
    Now You can select the values from here and run the query.  you will get the result.
    One more way is there using cascading LOVs
    1. Go to Tools menu > List of values > Create Cascading list of values.
    2. Double click on Country, Region, State, City and Storename.  Close it.
    3. Save and export the universe.
    4. In webi drag and drop the objects in result objects pane, apply query filter and run the query.
    Now you will get the result.

  • Variable values not passing with Web Application Designer

    We are on SP 11
    I have defined variables in the planning modeler (no personalization) that should be used when executing a copy function.  The idea is to have ready input capability.  For example, the variable VERSION is defined - when the planning function is executed, the user should have the ability to select a version value.   I have defined TWO button groups to enable the user this feature, however the values will not override the default variable value defined in the planning modeler
    BUTTON GROUP #1 - this is a copy function button with Display Varable Screen option ON.  When I press the button, the variable entry WEB Page Dialog pops up (with the default value).  If I input a differenct value, we get the error the the value characteristic is not included in the selection.  If we use the drop down available on the dialog box to select available values, we get what's on the Web Template (it seems the drop down option is not working)
    BUTTON GROUP #2. - This is a VARIABLE BUTTON using the Open Variable Dialog command (the expectation was to override the default value) When we use the drop down option on the Web Page Dialog, we have the ability to select the valuse available, however the value does not override the default value defined on the planning modeler.
    Any suggestions are appreciated.
    Regards,
    Andrew Ramirez

    Hi Andrew
    I realise your posting is now 6 months old.
    We are also on SPS11 and have a similar problem.
    Did you manage to solve this problem>
    Thanks
    Ian

Maybe you are looking for