Preventing Automatic Updates With CD Installation

How do you run Java Web Start against a CD such that it will not check for updates? Our use case is to install a base version via CD for our customers that have low bandwidth requirements and then to use Java Web Start via the network to update the user in a controlled fashion with Jar Diffs. The web-based jnlp operates as a servlet using dynamic filtering based on the query parameters. We have already discovered that we cannot specify any query parameters to an import from the CD using the �import option. The import works fine, but now when we try to run the app, it tries to pull down the latest file from the server which does not exist in our case, and we do not want it to. We need to control web start so that it does not fail the application run when it can�t get the file. Ideally, it would not even check. We are delivering our product to the customer very soon, so I need to know ASAP how to disable the check for updates in Java Web Start.
Note: It seems to work fine in JDK 1.5 Update 7.

I tried with 5u8, unplugged ethernet cable:
C:\Program Files\Java\jre1.5.0_08\bin>javaws -wait -codebase file:///c:/notepad
-import c:\notepad\notepad.jnlp
This will import notepad application from c:\notepad into the cache.
notepad.jnlp:
<jnlp spec="0.2 1.0"
codebase="http://foo.com/notepad">
<information>
<title>Notepad</title>
<vendor>Sun Microsystems, Inc.</vendor>
<homepage href="index.html"/>
<description>Notepad Demo Description</description>
<description kind="short">Notepad Demo Short Description</description>
<icon href="notepad.gif"/>
<offline-allowed/>
</information>
<resources>
<j2se version="1.3+" href="http://java.sun.com/products/autodl/j2se"/>
<jar href="notepad.jar"/>
</resources>
<application-desc main-class="Notepad"/>
</jnlp>
And then I can launch with:
C:\Program Files\Java\jre1.5.0_08\bin>javaws -offline c:\notepad\notepad.jnlp
OR
C:\Program Files\Java\jre1.5.0_08\bin>javaws c:\notepad\notepad.jnlp
"-offline" does not make a difference here, because the notepad.jnlp says offline-allowed.
Is this what you need ?

Similar Messages

Why is my address book no longer being automatically updated with new entries?

why is my MacBook Pro address book no longer being automatically updated with new entries?
thanks!
Joe

thanks for the question!
i have an iphone that uses addresses/contacts. i don't use icloud because i was getting doubled calendar entries.
updating is done "via itunes on this computer"

My location field on calendar automatically updates with unfinished addresses

When I enter the address in the location field of calendar, even if I type in the whole address, it sometimes substitutes it with an incomplete one which it has plucked from somewhere on the net. How to I overrule the location automatic entries with my own?

I am using Calendar on Yosemite now

Prevent automatic updates & return to prior version

i do not like or want to new version of firefox
i want to return to the old view
i do not want to have any further automatic updates - only by request and approval
more INFO:
visual disruptions do not work for me AT ALL

You should send any feedback about these changes to http://input.mozilla.org/feedback since putting the feedback here is useless. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting.
There was a previous way by going through the Options menu but after disabling it through there, when you would go to Help > About Firefox, it would update regardless of that setting.
You can set these prefs in <code>about:config</code> to disable automatic updating: 
app.update.auto - false 
app.update.enabled - false 
app.update.silent - false 
If you really wish to downgrade, you can do that through the [[Install an older version of Firefox]] link. 
However, I recommend you try to use these add-ons to help customize 29. 
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

Slideshow on iPad, automatically updated with latest photos

I'm looking to have a iPad slideshow running at events, while allowing event guests to email in photos - which are then automatically added into the already running slideshow. Could be either via an app, or Safari.
It looks like there are some systems that support emailing photos into albums, e.g. picasaweb, flickr, and it's also possible to update an iOS device's photos over email using IFTTT (unfortunately there's a sizeable IFTTT lag), but I haven't yet found a good way to have a running slideshow automatically include display on newly provided images.
I've found ways to get almost there, e.g. I've found apps such as "Web Albums" and Flickring to show picasaweb or flickr slideshows (but you have to exit the slideshow and resync), or embedding a picasaweb slideshow in a custom web page that could auto-refresh (although embedded picasaweb slideshows don't loop), Smugmug (but embedding in a custom web page has some limitations).
Any other ideas?
Thanks!
Andy

Thy this: http://nootrix.com/2012/01/prioritize-wifi-on-iphone/

How Do I Keep My Contacts, But Prevent Automatic Sync With Yahoo!?

I never had this issue with my 3GS, but my Contacts is being overrun/cluttered with email addresses of everyone I have ever sent or received an email to or from. Most of these are just casual email addresses of someone I've corresponded with for a day or two to do some business on Craigslist, ebay, whatever, and have no intention of corresponding with in the future.
It is such a pain to manually remove these addresses. If I turn off the feature in Settings, I lose everything, including the ones I have manually entered!
It might be a little better if I could link an automatically sync'ed email address with an existing phone contact, so I don't have to do that manually, but the bottom line is that I would like to stop the automatic syncing of Yahoo! email addresses, without losing the ones I have entered myself.
Help! And Thanks!

Your "homepage" shouldn't have anything to do with email or auto-respond.
See if this helps you, as I'm not sure what you are talking about. 
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Invoice reference field automatically updated with 'V' via BAPI

Dear Experts
While we posting a document through "BAPI_ACC_DOCUMENT_POST " getting invoice ref by default as ‘v’ as per below screen shot but
in BAPI we are not getting any filed through which we can set it. Kindly guide me s a solution for this issue
Reagrds
Ajeesh.s

Hi Ajeesh
This is SAP recommendation that you when you are posting Cr Memo, this field must be populated as V
Thats the best practice
Br. Ajay M

How can I prevent Firefox from automatically updating?

Hello,
I am trying to prevent Firefox 28 from automatically updating to Firefox 29 (on OSX 10.7.5).
I have the option "Never check for updates" checked under 'Update' in the 'Advanced' Preferences. I have "Automatically update Search Engines" unchecked. I have uninstalled Firefox 29 completely using two separate uninstall clean-up kits and emptied the trash before re-installing Firefox 28... Yet every time I finally re-arrange, customize and re-sync Firefox 28 back to the way I like it, I restart my Mac and Firefox 29 rears it's over-drawn, bubbly, space-wasting, UN-SYNCED, ridiculous tabs on top nonsense user interface.
I've tried to work with Firefox 29 but the new SYNC simply does not work and that's a deal breaker. I need the changes I make on my mac to be reflected across the other two systems on my desk (one WinXP, one Win7) and vice versa. When I try to sync on FF29 it takes me to a page to log in and then refuses to recognize my email and password (which I have thoroughly confirmed on my other systems as correct).
Can you please help me prevent Firefox 28 from automatically updating to Firefox 29?

Thank you for your comments, cor-el.
Yes, I know about Classic Theme Restorer, but the point is what gives Mozilla the right to update my Firefox when I already have quite clearly set every option to prevent automatic updates?
I have set:
app.update.auto - false
app.update.enabled - false
app.update.silent - false
So which secret magic setting has Mozilla used to bypass all these settings and what gives them the right to do it?
Also, moving the tabs bar and menu bar and whatever else has been moved in Firefox 29 is a THEME change. It is not a security fix. Mozilla should not be in the business of changing the theme or look of Firefox. It is not their business how I want my Firefox to look.
Regarding "tabs", I have mine down the left side, so this tweaking of the tab bar position is pointless anyway.
To Mozilla, Just for absolute clarification, there is no way you can possibly justify forcing an update on users computers without their explicit acceptance.
What if someone found out how Mozilla forced the update? They could then force an update that is NOT a genuine Firefox release and do untold damage to peoples' computers.
So now I am forced to delete Firefox from my startup script and start it manually just in case their is another forced update that I can stop.
To cor-el, thank you for your post.
To Mozilla, you have lost the plot.

Want to PREVENT automatic firmware updates & other changes

OJ 8600 Pro. Wireless network setup.
I want to prevent automatic updates.
There must be a way to stop automatic firmware / software updates. I've not found it.
"If it ain't broke, don't fix it." Especially printers.
People update firmware / software (not just HP) & some things suddenly don't work.
I don't update * anything * until I know what it is.
I just installed some new, non-HP cartridges. Suddenly, the printer is accessing the internet & "downloading." It flashed by quickly on the printer display & I couldn't read everything it said .
At the same time, it said something like "... then web printing will also be activated."
I specifically DISabled that, in the EWS, when I 1st setup the printer. Don't want web printing, don't need it.
Now, because I replace some carts, it's going to re-enable it for me? Talk about brass balls.
I cancelled that download / shut printer down. But sure enough, it had switched my settings & re-enabled web printing. (I disabled it again).
The next power on, printer resumed some download. It didn't bother saying what - just showed, "X of Y downloaded" & showed the progress. I immediately cancelled it again.
If there aren't settings to prevent any automatic FW / software updates, or if it just ignores them, I'll have to bury the printer far under the firewall.
Thanks.
This question was solved.
View Solution.

Thanks RnR.
Here's one method of using a router to prevent devices from accessing internet, that should work for many users.
I decided to use my router to block the printer's internet access. This can quickly & easily be reversed or modified. It involves 2 basic steps:
1. Assign the printer a static IP address.
2. Use router settings to deny internet access for the static address.
I have a Cisco / Linksys router, but many brands & models have these basic features, that are accessible from the router's EWS (embedded web server), through a web browser.
HP support has detailed instructions on assigning static IP addresses for most printer.
Here is one HP document covering that for my OJ Pro 8600 & some other models: http://support.hp.com/us-en/document/c03781399/
It may be easier for most users to assign an HP printer a static address, using the printer's EWS rather than the printer display.
Note: generally, when using a router to assign a static IPa for devices that the router would otherwise be assigning automatically (via 'DHCP'), the static address chosen is outside of the current range of addresses, that the router can use to assign addresses to the devices connected to it. In many routers, what the current range of addresses it can choose from to assign DHCP addresses is visible under some section / tab of the router EWS.
In my Cisco, the current DHCP range is shown under the Setup -- Basic Setup -- DHCP section:
"IP Address Range: 192.168.2.60 to 192.168.2.109"
So, I chose a static printer address outside that (192.168.2.XXX).
You should write down & save the selected IPa, in case there's any problem getting it from the printer later (shouldn't be, but...).
Assigning the printer a static IPa hasn't affected accessing its EWS (for me).
Once the static IPa is assigned & recognized (by the router), use the router's settings to block that address from internet access. In my Cisco, it's under "Access Restrictions." (You may have to power the printer on / off; possibly reboot some computers, for the new static address to be recognized.) Here's how I did in the Cisco:
Log on to the router EWS (default login name & password is admin/admin. You should always change router PASSWORD from factory defaults, for security reasons - so your neighbor or kid can't remotely hack into your router).
Go to "Access Restrictions" tab or similar.
Click "edit list of PC's" and put in the "MAC address" of the printer. (found in the printer's network config / settings).
Save the MAC address settings.
Back on the router main Internet Access page, give this internet access policy (rule) a name.
Then click "Deny Access."
Check "Everyday" and "24 hours" for times, to block the IPa continuously.
Save the settings.
Now the router won't allow that address to access the internet - during the times specified, but the device (printer) can still communicate on the local network - all the time.
The same can be done for specific computers. Like to block kids' computers from internet access on certains days / hours.

How to prevent automatic download and install of Reader 8.1.2

Hi-
I have Adobe Reader 7.0.9 and I need to keep it as my default Adobe reader program and plug-in for some applications that I use.
Over the last week, Adobe reader 8.1.2 downloads automatically and installs itself in my business laptop (Win XP SP2) and replaces my 7.0.9 version.
Each time I uninstall the 8.1.2 and reinstall the 7.0.9. I ensure the option of automatic download and install is disabled in 7.0.9.
But it still happens I have for the xth time today the new 8.1.2 in my laptop.
Anybody knows what is going on ? And how can I solve this issue to keep my 7.0.9 version ?
Thanks.

radellaf wrote:
This nonsense is happening right now on my iPhone. 2.3GB deleted, now iOS 8 is downloading without my consent.
That's *not* a good thing to hear.
After the download finishes, do NOT press the Install Now button. Try the following to remove the download from the device. Here's the procedure I came up with last time this happened with iOS 7...It may or may not work.
Re: Apple Forced iOS7 update on my iPad2 !
Afterwards if you succeed, block Apple's update server using the following method so it wont get pushed to the device again:
In your router's settings, set up a block (using Access Restrictions or similar in the router's web interface) to mesu.apple.com. This will prevent the devices from "phoning home" to Apple, checking for the update and getting the download pushed to it again.
Or follow the instructions at this link:
http://ios8tips.com/how-to-prevent-automatic-update-to-ios-8/

Preventing automatic download and install of iOS 8

Once again this becomes an issue. How to prevent the automatic download and installation of iOS 8. Thanks.

radellaf wrote:
This nonsense is happening right now on my iPhone. 2.3GB deleted, now iOS 8 is downloading without my consent.
That's *not* a good thing to hear.
After the download finishes, do NOT press the Install Now button. Try the following to remove the download from the device. Here's the procedure I came up with last time this happened with iOS 7...It may or may not work.
Re: Apple Forced iOS7 update on my iPad2 !
Afterwards if you succeed, block Apple's update server using the following method so it wont get pushed to the device again:
In your router's settings, set up a block (using Access Restrictions or similar in the router's web interface) to mesu.apple.com. This will prevent the devices from "phoning home" to Apple, checking for the update and getting the download pushed to it again.
Or follow the instructions at this link:
http://ios8tips.com/how-to-prevent-automatic-update-to-ios-8/

Stop automatic updater

automatic updater tries to run itself upon start up. How can I turn this off completely, I can choose updates on my own. Anyone with an A to Z instruction set? Thanks!

#If you open up Firefox and open the Options from the Firefox Menu
#Open the Advanced tab and click on Update Tab
# Choose the update settings from here then restart Firefox. This will prevent automatic updates.
[https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption#w_update-tab]
However I do recommend updating for recent security issues addressed in Firefox.

Ipod playlists/podcast automatic updates

Hi,
I have subscribed to some podcasts. Is there any way that my iPod can automatically update with the episodes I have not listened to-or with each new days episodes- without me dragging and dropping each episode I want every day, and erasing the episodes I have listened to on my iPod? Can I make a 'business' playlist that when I drag and drop it into my ipod it only puts the newest shows of the podcasts that I added to the playlist?
Thanks.

Connect the iPod and select it in the SOurce list in iTunes.
Select the Podcasts tab and pick what you want.

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

Automatically Updated Form Fields

How can I set a field in a PDF form to automatically update with the entry in another field. I need to do this for both free form and numerically formatted fields.
Thanks

Can you be a little more specific about what you mean by 'automatically update with the entry in another field'? That could be interpreted different ways, each requiring a different solution in the PDF. Do you want the fields to share the same value? Do you need a calculated value? Do you need to set the value in field A using a matching value from the entered value in field B?

Preventing Automatic Updates With CD Installation

Similar Messages

Maybe you are looking for