Preventing FC Express HD from loading audio filters

How can I prevent Final Cut Express HD (3.0) from loading all the TDM/RTAS/AudioUnit etc. plug-ins that we're working with in ProTools 7 HD ?
It takes FCE HD 15 minutes to validate all the 'audio filters' and it does that every startup: we don't even need the plug-ins in FCE HD.
G5   Mac OS X (10.4.3)  

I'm having a problem with Final Cut Express 3.5 failing to load and trying to load TRacks plug-ins. Did you resolve the problems you had?

Similar Messages

  • Can I prevent the #HEAD# tag from loading jQuery in APEX 4?

    I am using APEX to generate a report that is specifically designed to be viewed on a BlackBerry phone.
    When accessing the APEX 3.2 version of the application from a BlackBerry phone it works fine.
    When accessing the APEX 4.0 version (exported from 3.2 and imported to 4.0) the BlackBerry browser reports the following error:
    HTTP Error 413: Request Entity Too Large
    The page you requested could not be loaded. Please try loading a different page.
    I have tracked this down to the use of jQuery-UI by APEX 4.0.
    I can reproduce the error in APEX 3.2 by loading the jquery-ui.min.js file in the Page Template.
    So, is there any way of preventing APEX 4.0 from loading jQuery or jQuery-UI by default in the #HEAD# tag of the page template?
    Richard

    Hi,
    You can set page attribute Include Standard JavaScript and CSS to No.
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/bldr_pg_edit_att.htm#BACHFFBE
    Of course then any of Apex JavaScripts are not loaded
    Regards,
    Jari

  • FCP5 crash at load Audio Filters

    FCP5 crashes on loading at point of loading audio filters.
    I have many VST/AU virtual instruments for non-picture work.
    Is there a key to hold down during FCP load that will disable audio effects/filters?
    There are reports here of similar issues on loading but no conclusive responses.
    Any help much appreciated
    Ian
    G5 Quad (8GB SDRAM)   Mac OS X (10.4.6)   2x 23" cinema display

    OK, you means the ProApps Update. Pro Tools is a different application entirely. It has different requirements and will do different things to Apple pro applications.
    That could be the problem. Make sure the admin user runs the application. Trash the preferences for both the admin user, run the application, and trash the preferences for the non-admin user.

  • How to prevent duplicate web pages from loading

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/930219]]</blockquote>
    how to prevent duplicate web pages from loading

    <s>Hi berternie, can you describe this in more detail?
    Are you saying the identical page loads in two different tabs? When does that happen -- when you click a link? or when you use a bookmark?
    Or do you have multiple tabs open every time you see your home page (i.e., when you start up, open a new window, or click the home icon)?</s>
    I see, you have more info in this thread: https://support.mozilla.org/en-US/questions/930219

  • What do I do when Final Cut Pro 4 crashes when loading audio filters?

    When I try to start Final Cut Pro it crashes while loading the audio filters. I have upgraded through the years to FCP HD but trashed that and reinstalled FCP4.0. I also trashed preferences file and everything else other forums suggested. I ran preference manager but no luck. It hasn't opened for several months. I am running OS X 10.4.11 on a dual 1.8 GHZ Power PC G5 with 2.5 DDR SDRAMM. Thanks in advance for any help.

    I downloaded Audio Manager and disabled the plug ins it found(which were in a different file folder) and lo and behold FCP loaded. I guess now I need to enable each one at at time and find out which is the culprit. Thanks for your help.
    Steve Griffin

  • FCP4 gets hung up while loading audio filters, then quits

    I have only very cursory knowledge of Final Cut Pro. It is installed on my G4, and has been used successfully in the recent past.
    Upon opening FCP4 without my iLok in, I am prompted to purchase or cancel using all of my Waves plugins for ProTools, one by one. When I use the iLok, then FCP4 gets hung up on loading the audio filters, and subsequently "unexpectedly" quits. I have tried shutting down and rebooting with the ILok in place - no luck there.
    I was unaware that Waves even operated as a plugin inside FCP, yet opening FCP seems to require my Waves authorization, but when I give it, FCP crashes. What could my problem be?
    This problem just started last evening after sporadic but successful use of FCP, as well as fully operational use of Waves plugins within ProTools.

    AudioUnit Manager 1.1 will let you create default sets of AudioUnit plugins.
    Third party components are usually to blame with FCP failing to start up.
    With this free app you can create sets which are specific to a particular program.
    For example, create a set for FCP with the all offending plugins disabled.
    When you boot up, they are placed in a "disabled" folder and stay disabled until you launch a set that includes them.
    Get AudioUnit Manager 1.1 here (free- donation ware)
    http://www.grantedsw.com/aum/

  • Upgrade Logic Express 9 from Logic Audio 5 (Big Box)

    Hi,
    I am trying to install Logic Express 9 Upgrade (the version to upgrade from Logic Express 6, 7 or 8 or Logic Audio 5 or 6 / Big Box) on my Mac. The installer asks me for my old serial number to upgrade - when I plug in my XSKey which I got with the Big Box (Logic Audio 5) I get an error message that my XSKey is not eligible for the upgrade.
    I already tried the XSKey updater, tried installing the latest XSKey driver and also installed Logic Audio 6 to check the authorization of my XSKey. It clearly states that my XSKey is authorized for Logic Audio 5 (not for 6 though).
    When checking on a Windows-PC it states that it is authorized for both the Windows and Mac version of Logic Audio 5. Since I don't have an academic or other NFR-edition of Logic Audio 5 I should really be eligible for that upgrade, right?
    Any suggestions on how to install the upgrade?
    Thank you,
    johannes.

    I called Apple regarding this issue that Monday and after sorting out the usual pitfalls while upgrading (as I mentioned Academic/NFR-Versions) they asked me to mail in my XSKey because I should have been able to upgrade.
    Today Apple sent me a replacement serial number for Logic Express 9 and everything is up and running now. Many thanks to Apple Professional Applications Support!
    Best regards,
    johannes.

  • FCE crashing on startup when loading audio filters

    I get a message that it might have to do with the third party Line-6 Gearbox filter.
    How can I remove that so FCE can load?
    When I look in Library/Preferences/Final Cut Express User Data/Plugins the folder is empty.
    I tried to delete the Gearbox program but no improvement.
    Thanks / Christer
    Message was edited by: Christer Hiort1

    Hi(Bonjour)!
    Look under library-application support-audio-plugin in your home directory and at base level on your hard drive.
    Michel Boissonneault

  • Firefox keeps preventing important pages (webmail) from loading fresh contents. How do I quit this function?

    Firefox prevents the refreshing of my webmail site. Very annoying, as there may be new information or mail - or even not. But I want to know it of course. It mustn't be up to Firefox!

    Firefox prevents the refreshing of my webmail site. Very annoying, as there may be new information or mail - or even not. But I want to know it of course. It mustn't be up to Firefox!

  • FCP want open. It hangs up on (loading audio filters) Please help.

    I run PROTOOLS on my system with waves platnum effects plugins.

    There were some of these audio plugins, that didn't work with FCP, can't remember the list, but you might search for audio plugins in the Support area here... there was an article about it. You could remove those plugins and see if it doesn't clear it up.
    Jerry

  • I am receiving error code of "Error: oElement is null" which is preventing some flash ads from loading on my site. Any solutions?

    Over the past few weeks, I have had some problems with some flash ads not showing up. I did a check in the error console and saw the following:
    Error: oElement is null
    Source File: http://ad-cdn.technoratimedia.com/00/49/82/uat_8249.js?ad_size=728x90
    Line: 1
    The same ad shows up fine in Safari which leads me to believe this might be due to Firefox. Anyone else see anything similar?

    Can you post a link to that site then we can take a look?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Prevent Startup Form from Loading using Command Line Arguments

    Hi there
    I'm developing a VB.NET windows forms application in VS2013.
    The application will have 2 ways of being executed, one being by the user manually and the other being automated by the task scheduler.
    When executed by the task scheduler, command line arguments will be used so that the application is aware that it is being run automatically and not by a user.
    My problem is that I want the startup form to load when run by a user but I don't want it to load when it is run automatically, I just want to execute code.
    Is it possible to prevent the startup form from loading by using the commandline arguments from the MyApplication_Startup event?
    Cheers

    Hi Aureuz,
    >>Is it possible to prevent the startup form from loading by using the commandline arguments from the MyApplication_Startup event
    It is impossible to accomplish it in the MyApplication_Startup event, we can use Form.Shown event:
    #Form.Shown Event
    http://msdn.microsoft.com/en-us/library/system.windows.forms.form.shown(v=vs.110).aspx
    If we start a form by using the commandline arguments, the count of CommandLineArgs will be above one, if so, use Me.Hide() method to hide this form.
    Private Sub Form1_Shown(sender As Object, e As EventArgs) Handles MyBase.Shown
    Dim args As String() = Environment.GetCommandLineArgs()
    If args.Count > 1 Then
    Me.Hide()
    Else
    Me.Show()
    End If
    End Sub
    You can also uncheck "Enable application framework" on the project properties application tab and select your startup object to a module object:
    Module Module1
    Sub Main()
    Dim args As String() = Environment.GetCommandLineArgs()
    If args.Count > 1 Then
    'Run your background code
    Else
    Dim f As New Form1
    f.ShowDialog()
    End If
    End Sub
    End Module
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to prevent the User from loading more than one seq file?

    Hi,
    I would like to prevent the tester operator from loading more than one test sequence.  Any ideas how to do it?
    Thanks
    Rafi

    Hi Marty,
    Marty_H wrote:
    Hello mhousel,
    Testexec.exe by default loads the sequence files that were last open when it runs.  It is often desired behavior to have multiple sequence files load automatically. 
    [Mark Housel] Maybe for some but certainly not for me. 
    This should be easily handled by TestStand without any problems.  What do you mean by "chaos ensues"? 
    Certainly Teststand doesn't care a bit how many sequences are open.  But, when my sequences open they initialize HW of the ATE associated with
    that sequence file during the sequenceFileLoad callback.  e.g. I allocate TELNET handles to a terminal
    server that connects to multiple console within the system and als for
    the UUT.
    If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
    terminal server and obviously fails, so my sequence reports that it
    can't properly initialize the ATE HW.  Bad juju!
    Are your sequence files set to run automatically when they are loaded?
    I guess so.  Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
    If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future.  I hope that helps.
    The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
    Thanks,
    Mark

  • Preventing Startup Items From Loading

    How do I get the startup items to not load in OS 10.8.5? I've upgraded and now when I press the Shift key after I login to an account it doesn't prevent the startup items from loading. What key(s) do I press to prevent the startup items from loading in Mountain Lion?
    Thanks

    Are you trying to boot into the Safe Mode? If not, why don't you want the startup items to load? More information about what you are trying to do would help.
    Safe Mode - About
    Safe Mode

  • Prevent Plug-In From Loading/Running

    Hi Folks,
    What is the recommended way to prevent a plug-in from loading (CS3 and CS4, Mac and Win)? I'm releasing a pre-release build of a plug-in, and I want it to expire after a certain date. When the user starts up ID or IC after the expiration date, I want to pop up an alert and inform the user that the pre-release has expired, and then not load the plug-in.
    Another way to do this would be for me allow the plug-in to load, but disable all of the UI, but I would rather just not allow it to load at all.
    Thanks in advance for any help!
    -- Jim

    Ages ago ...
    ID3SDK/docs/references/sdkdocs/api/classPlugIn.html#a3
    Called when the application loads the plug-in.
    Typically a plug-in that needs to do some action at startup should use IStartupShutdownService. The plug-in should override Load only if there is some global state which, if missing, would cause the plug-in to be useless.
    Returns:
    bool16 kTrue if plug-in loaded OK, false otherwise.
    This never worked correctly, some of the resources would still load and cause defunct menu items etc. Instead of fixing the feature, the comment was adjusted. :(
    I fear you're stuck with locked UI.
    Dirk

Maybe you are looking for