Preventing the Acrobat window from "restore down"

Is there a control to prevent Acrobat 8 from resizing the application window
when a PDF document is opened? I like to work with the window maximized, and
even when it is maximized opening a new document sometimes causes a "Restore
down" to occur, so I have to click the maximize button each time.

Are you referring to the "Window Options" found in "File/Document
Properties/Initial View". There is a checkbox for "Resize window to initial
page", but it is not checked.
This is a document that I created myself from scanning. Some other PDF
documents scanned during the same session will cause the window behavior,
but others don't, and I see no differences between the "Initial view"
document properties for either of the two types.

Similar Messages

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.

Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.

Have you tried Windows Update in the Control Panel?
Many times it will find the newest supported drivers for Hardware.
Just be sure to install everything not just the Important ones.
Let us know if this helps.

Disable "this program is preventing windows from shutting down"

Hi
My application, that I am porting from Embedded Standard (XP) to WES7 uses the standard power on/off switch of a PC to power on/off. I intercept the FormClosing event and cancel the OS from shutting down. I then display a dialog box in my program asking
if the user wants to shut down the system. If they respond yes then I shutdown the system from within my code. This works fine on XP, but with WES7 you get the screen telling you "this program is preventing windows from shutting down". I then have
to press 'Cancel' to get to my application as before. Does anyone know of a way to prevent WES7 from showing this message and allowing my program to block shutdown quietly.
Many thanks
Steve W

pennbank is correct that holding the power button will stop the computer. But it stops *all* processes mid-step, which can leave some of OSX in an incorrect state because of pending internal file updates that were killed. I do not like to use that method if anything else will make it respond. For example, once the computer was not responding when I was using a BT trackpad. I eventually removed the batteries from the trackpad to force it dead, and the release of the BT channel freed the MBP.

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

When inserting a checkbox, how can I prevent the note box from appearing?

To all,
After -reluctantly- "upgrading" from Acrobat Pro 7 to Pro X I find this new version absolutely maddening.
Pro 7's features were easy to find in the tool bar. Now in Pro X everything is "dumbed down" with everything "nested" into each other...
But I whine and digress from my problem:
QUESTION:
When inserting a checkbox, how can I prevent the note box from appearing?
With every insertion of a checkbox onto a form, a "notebox" appears.
Thank you,
Matt

As you can see, when I add a checkmark to a page/form, a "note" is automatically added also. In my old Acrobat v. 7, this did not happen.
Any ideas on how I can set Acrobat Pro X to NOT include this note?
Thank you,
Matt

Photoshop CC 2014 - "Could not complete your request because something prevented the text engine from being initialised".

This problem has just started, only with CC 2014. It doesn't happen with CC or CS6.
When I open a particular layered file, then Duplicate it, then close the original Master file I get the "text engine" warning box when I try to enter text in the copy file.
If I enter text in the original Master file - no problem.
If the Master file is still open and I try to enter text in the copy file - no problem.
I've validated all my fonts in Font Book, deleting all the duplicates and one corrupt font. No change to problem.
I've gone to User/Library/Application Support/Adobe/Adobe Photoshop CC2014/ and trashed the CT Font Cache folder. No change to problem.
I've run PS Update.
Running OS 10.9.3.
Any suggestions?

I'm having the same issue on my work computer. I found this info in Adobe's help section.
Issue
When you use the Type Tool, you receive the following error:
"Could not complete your request because something prevented the text ending from being initialized."
To the top
Solution
Close Photoshop, clear the font cache, and restart.
Exit Photoshop.
In Windows Explorer, navigate to the Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CC/CT Font Cache folder.
Move these two files to the Recycle Bin:
AdobeFnt_CMaps.lst
AdobeFnt_OSFonts.lst
Empty the Recycle Bin.
Restart Photoshop.
To the top
Additional information
This issue can occur after you uninstall and reinstall Photoshop several times.
Text Engine error using type tool in Photoshop CC | Windows 8

Error: prevented the text engine from being initialized

I am getting the following error when attempting to use the text tool with my photoshop (12.0) - windows 7.
"could not complete your request because something prevented the text engine from being initialized"
I've attempted to follow some posts from others to fix without success.
There are two fonts in my fonts folder that are shortcuts - and the fonts don't exist in the folder. Also, I can't delete the shortcut font from the fonts folder.
(I'm posting this now... and might have a solution. Just in case, I want this conversation started.)
TIA,
Greg

Usually that means that you have a corrupt font or a corrupt OS font cache.
See this document for more troubleshooting steps: http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
Also, make sure you have all the Photoshop updates installed.

Prevent the next message from being automatically selected when deleting?

The information on this page (Mail (Yosemite): Delete messages) doesn't work for me:
"Tip: To prevent the next message from being automatically selected (and marked as read), hold down the Option key when you delete a message."
The next message still opens up.
Anyone know what to do here?

Hi,
not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
Sorry, if there are now 2 answers.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

How do I remove the coloured bars from running down the side of my emails.

How do I remove the coloured bars from running down the side of my emails.

Hi
The setting I have in Composing are-
Composing
Message Format - Rich Text
In addressingonly have tick in When sending to a group
Responding - tick only the first two boxes
Last only the bullet for Include selected text
Hope htis helps

In my old OS I could press F11 and clear all the open windows from view to see only the desktop. How can I do that now in Mavricks?

In my old OS I could press F11 and clear all the open windows from view to see only the desktop. How can I do that now in Mavricks?

system preference > Keyborad > click the box thast says use all f1,f2,f2 keys as standard functiong Key and then the f11 key should casue all window fo fly to the side and you can see your desktop

How to open PDF in Acrobat 9 without displaying the Acrobat window

Am using IAC in Windows XP via VC++ to open and modify PDFs in memory without displaying the Acrobat window so as to the PDF Processing in the background. To open the PDF, have to call the method PDDoc.OpenAVDoc which opens the Acrobat window for displaying the document.
As a workaround, I tried to minimize and hide the Acrobat viewer, using the AcroApp.Minimize and AcroApp.Hide methods. However opening, minimizing and hiding the viewer is creating a flickering effect (Acrobat window coming and going) especially when a no of PDFs have to be processed in a loop.
If I use only PDDoc.Open without the call to OpenAVDoc, am getting an error "No form is open in the Acrobat viewer".
Can anyone suggest a workaround to open and process PDFs in memory without displaying the PDF.

PDL,
Am getting the Error "No form is open in the Acrobat viewer" while trying to instantiate fields list inside the form via an AcroForms object. The problematic code snippet is given below
iPDDoc->Open("PDFFileName")
iAVDoc->AttachDispatch(PDDoc->OpenAVDoc("PDFFileName")), true);
ipFormApp->CreateDispatch("AFormAut.App", &OleExc)
i pFields = new IFields(pFormApp->GetFields());
The GetFields method is giving error in Acrobat 9 but its working fine in Acrobat 7 and 8.
Since the AV layer methods are working fine in Acrobat 7 and 8, please let me know why they are not working in Acrobat 9 and if there is any workaround.
Also, if I use only PD Layer methods, can I access the form fields inside the PDF?

How do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.

how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.

If you don't have an icloud account, then icloud is not the thing that's popping up a window.
If you are being asked to enter a password when accessing itunes, then the problem may be that you have purchased items (apps, songs, etc) on the device that were purchased using a different itunes account than the one you currently have defined on your device.
Purchased items are forever associated with the itunes account (the apple ID) that was used to make the purchase. If you change the ID on the device, you won't be able to update any of them. You'll have to purchase them again.

How do i stop the keychain window from popping up it is really annoying?

How do I stop the keychain window from popping up, it is really annoying?

What is the specific message you are getting?
If it's asking for a password, then enter it and you should be good. If you don't know the password, then I would probably recommend reseting your keychain entirely. Your keychain keeps saved password for certain websites and programs but in my expereince the average user is not tremendously affected by reseting the keychain. It's just a matter at that point of reentering your passwords manually if you've gotten used to them populating automatically.
Check out http://support.apple.com/kb/ts1544 for an article on how to reset the keychain.

Calling a Function in the Parent Window from the Child Window

QUESTION: How do I call a function resident in the parent
window from a child window?
BACKGROUND
I have a JavaScript function resident in the parent window
that reformats information obtained from the Date object and writes
the result to the parent window using the document.write( ) method.
I would like to call this function from the child window and have
it write to the child window instead. Is this possible? If not,
must I rewrite the entire function and nest it in the below code?
If so, what is the proper form of nesting?
CODE: The code that creates and fills the child window is
provided below. The highlighted area indicates where I would like
to enter the information from the function resident in the parent
window. I have tried every imaginable permutation of code that I
can imagine and nearly destroyed my parent document in the process.
I am very happy that I had a back-up copy!
function openCitationWindow() {
ciDow = window.open("", "", "width=450, height=175, top=300,
left=300");
ciDow.document.write("A proper way to cite a passage of text
on this page:<br /><br />Stegemann, R. A. 2000.
<cite>Imagine: Bridging a Historical Gap</cite>. " +
document.title + ". [<a href='" + location.href + "'
target='_blank'>online book</a>] <" + location.href
+ "> (");
MISSING CODE;
ciDow.document.write(").<br /><br /><input
type='button' value='Close Window' onclick='window.close()'>");
ciDow.focus();

Never mind - I was doing something very stupid and wasn't
calling the function as a method of a movie clip. I was simply
calling checkTarget(event) rather than
event.currentTarget.checkTarget(event); which seems to work.

Preventing the Acrobat window from "restore down"

Similar Messages

Maybe you are looking for