Preventive maintenance order actual completion time and date

Hey gurus,
In preventive maintenance order the basic and scheduled start dates are picked from the maintenance plan. Now the actual start and end dates are in display mode. My client wants an overall completion time and date of the preventive order and not of individual operations. Also at the end of the month they want to see the total time spent on preventive maintenance. Can you suggest any way to sort out the above problem.
Regards,
Abhishek

hi.
the basic start date and end date is coming from maintenance plan. but you can change that dates according to your requirment. For that you have to remove the automatic schduling check in the dates header in maintenance order. Afetr that you can put basic start and end dates as per your requirement.
Also the actual start and end dates and coming when you confirm the operation.
When you confirm the first operation, that date the system will take as actual start date and the day you confirm you last operation or fully confirmed the order will be taken as actual end date.
So i dont think yu have any problem. You can take basic start or basic end dates for this and change the dates as per your maintenace requirments.

Similar Messages

Changing basic finish date in Preventive maintenance orders

Hi Experts,
My requirement is to block PP work centre when maintenance schedule the equipment for preventive maintenance. I am making system condition as zero in generated preventive maintenance order but basic finish date is not changing in the order automatically. Can anybody please explain how to bring this? Finally my requirement is system should change basic finish date and time as time given in operation of task list.
Thanks in advance.
best regards,
Srinivas M

Hi Praveen,
I have done all setting and tested but there is no change.
My client requirement is like this - whenever maintenance plans are scheduled, for the scheduled dates, production capacity should not be considered by production. We could do this for breakdown orders but not happening for PM orders unless we change the finish date.
The issue is to get the finish date automatically when scheduling maint.plans with respect to values given in operations. Please suggest how to get the basic finish dates automatically.
best regards,
-Srinivas

HT5361 Today, I experienced a problem with my mail. the time and date on each email received and sent is 18-06 and the date is 22nd July irrespective of the actual time

Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John

Incorrect date or time displayed in various applications

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

IPhone 4S time and date keeps resetting, despite being set to automatically do so.

After having recently upgraded my iOS to 7.0.4, my Verizon iPhone 4S has started to re-set the time and date every now and then at random. It does this, despite me having my Settings set to automatically set the date and time based on my location. I have called Verizon about this and all they had me do was to reset my network connections and reset my roaming capabilities...and despite me doing that this morning, the time re-set itself again this afternoon. I have found the only solution has been for me to power off my phone completely and then once on again, set the phone either into Airplane mode for a second - or to just wait until the Verizon signal switches the phone back to being the correct time and date on its own. I have also found that these issues have started to affect my ability to send and receive iMessages, as well. For some reason, when the date/time re-sets, the iMessage option becomes un-selected and I have to manually go back and turn that functionality back on. Anyone else having these same issues? It's incredibly frustrating and I'm not sure what else I can do save for constantly hard, re-starting my iPhone everytime I notice the time and date is out of whack. Also it's hard for me to tell if this is an Apple hardware issue/bug that just needs to be fixed - or something to do with Verizon. Any tips/info would be appreciated.

Try setting your time to manual. This way, the iPhone is the one controlling the time. As you correctly understand, when it is on auto, it is controlled by Verizon and their individual towers. If after setting the time to manual it works, then I would say it isn't a phone issue, but a Verizon one. Do you frequent the same area when this occurs? It could very well be an issue with a particular tower in your area and Verizon would need to check that. If the time goes off again while on manual, then it could be the phone. User troubleshooting is restart, reset, restore from backup and restore as new. Try each in order until the problem is fixed. If it cannot be, then make an appointment at the Genius Bar at Apple to have the phone looked at for hardware issues.

I have to reset time and date after booting

My mac pro cannot hold date and time.
so far, I have replaced the pram battery and done the pram reset several times.
at first i noticed that the sys pref panes were unlocked when I went in to change the time and date but I have since cured that in sys pref/security.
the governing factor seems to be wetherr or npt is a revoot or completely cold boot (mains power switched completely off)
the expected message comes up i.e. " your system clock is set to a time and date before 1.1.2008 some progs may bave erratically blah blah "
the actual time has reset to 1.1.2001 ( dont know if that is significant but mentioned it just in case).
So, if i just shut the machine down and then boot it up again, no probs
if i restart, no probs
shut down and pull the plug ?? 1dt, Jan 2001
would appreciate some advice

Click here and ask. If they tell you to call, and they probably will, accept that.
(123024)

Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

MSI 760GM-P34 (FX) restarts and resets time and date

this motherboard started resetting itself, especially on Facebook.
I will be surfing or whatever and it will shut down and restart.
I get the normal windows error that it shut down unexpectedly and then everything loads normally.
if I shut it off completely, then restart, I get one beep then two beeps and it resets the time and date to 2012.
I have replaced the battery, reset the bios with the jumper, tested the hard drives , CPU, power supply, card reader, video card, and everything else. All checked out fine and in working order.
the computer seems to run fine as long as I don't shut it off or as long as it don't reset its self.
the temp is around 70 degrees and everything seems fine otherwise.
what could be causing this?
I like MSI boards but I'm thinking of going with ASUS or another brand if this motherboard is taking a crap after only 2 years. (I bought it Brand new)
MSI 760GM-P34 (FX)
AMD Phenom 2 X4 955 Black Edition..Never overclocked
XFX PRO 650 WT Power Supply
8 gigs Crucial Ballistic DDR3 memory
Hyper 212 Plus CPU cooler
Geforce 9800GT video card
Seagate 320 GIG SATA HD
Seagate 500 Gig SATA HD

Quote from: badboy2k on 17-June-14, 15:46:27
if you do not have it installed already download MSI Control Centre from here http://www.msi.com/support/mb/760GMP34_FX.html#down-utility&Vista%2064 and install it! start the program and click overclocking-Basic and see what it says the DRAM voltage is set to there!
it basically goes from " Core" X 800 - 2173.5 and "Ratio" X 04 -X 10.5
CPUID HWM shows this:

I am trying to find an app that will track the usage on my iphone with times and dates to see what was accessed on my phone when I was away from it and what if anything was done eg deleted messages viewed facebook etc?

Hi! I am trying to find an app that with track everything that is done on my phone with times and dates? im not really woried about call usage and texts sent I need it to view what has been done - for example:
Messages received
Messages deleted
Facebook viewed
Messages viewed
Internet viewed and what?
I just have an issue with someone using my phone - I used to track this through double clicking the home button and roughly knowing in what order I had been on things but they have sussed this one!
Thank you!!

No way to do that on a non-jailbroken iPhone. Why don't you just passcode protect your phone? That way no one but you can use it...unless they know your passcode.

Help - EXIF time and date not working correctly

I am a long time Lightroom user and am trying out Aperture 2.1. I like it a lot but I just found a serious problem. I'm importing some old photos into my Aperture library, by referencing the files in an existing folder. The time and date for some of the files gets messed up. When I view these files in LR the time and date is fine. When I look at the "date created" in the Finder, the time is also messed up. For a photo shoot I did in Europe, the time for some images has the right date & time when converted to US time, but for some images it has the right date & time but as if it were in the US time zone. The files are all Nikon NEFs.
Also, when I view the files in the Aperture import dialog box they are in the right order. But when they get imported and I'm looking at them in Aperture they are in the wrong order.

OK, I give up. Turns out that after one successful import where the dates were ok, subsequent imports have the dates messed up again - whether in Quick or Normal mode. I also tried importing to a new collection, and also tried importing after rebuilding the library (via command-option click in the dock). Still hving this problem.

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

Inserting current time and date in a form

Feel silly here, but I can't seem to find a way to insert form fields that will display currnet time and date, I see where it can be done for a digital signature, but that's not what I need. This is for a client sign in sheet. I want to know what date and time the form is printed, without having to manually enter that data. Thanks.

Actualy, looking around the web I found another Adobe forum where you answered another person's question about using a check box to populate a text field with the date, which is actually what I really need, as I want to be able to print the form with or without the date and time appearing. Here's the script you posted:
// Mouse up script for check box
{function () {
     // Get a reference to the text field
     var f = getField ("text");
     // Set the value of the text field
     if (event.target.value !== "off") {
          f.value = util.printd("mm/dd/yyy", newDate ());
          } else {
                f.value = " ";
I copied and pasted the code straight into the mouse up event for the check box, and then changed the text box name to the actuall name of the date text field, and the error I get is "too much recursion".

Nokia E71 time and date problems.

I cant ever set the time and date of my nokia E71. Anytime i access the time and date settings, it just doesn't go through. Please help me out.

Hi Faces1,
Welcome to Nokia discussions board!
In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
Then try to set the time and date again.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Preventive maintenance order header description

Hi all,
Preventive maintenance order (from Plans) header description is showing the task list title instead of Plan title.
normally Plan header or item header short text will be the order header short text, what is the reason for this
kind of problem.
Pl give your suggestions
Thanks

Hi!
I have checked by creating a maintenance plan with item and task list. I t is taking maintenance item header text in maintenance order. Would you please elaborate. If any user exit or any enhancement has beed done with this acivity?
Regards,
Vaibhav

IBook G3's Time and Date

Hello everyone,
I have an iBook G3 and every time I turn it on I have to change the Time and Date because it's way off the current Time and Date. It says "It may cause some applications to behave erratically" somewhere close to that. What seems to be the problem and What should I do?
Thanks,
Mike

Hi and welcome to the forum,
This happens anytime you take power off the iBook so:
Go to System Preferences > Date and time > click on "Set Date & Time automatically"
Now each time you start up the iBook after power has been off you will get the same warning but ~ 10 seconds later the iBook will automatically update the time if you are connected to the Net. Otherwise a good battery will prevent this.
Richard

Preventive maintenance order actual completion time and date

Similar Messages

Maybe you are looking for