Preventive Maintenance Order is not releasing as per scheduled Planning in Counter Based Plan

Hi Experts
In The below schenario
There is a counter based maintenance plan. of strategy 100 km,200 km,...1800 km..
Operaton1, Operation2,... Operation3... defined in maintenance package for 100 km, 200 km,.... respectively.
Now issue is that system is releasing order as per sequence of scheduled planing & not according to schedule of current counter reading of counter.
case: At 200km order 1 is released with operation1 only, logicaly system should release order with operation1, & operation2
same like that at 300 km, system has released order with op1 & op2, logicaly system should release order with operation1, & operation3 as per strategy defined in maintenance plan.
In the present condition, what we have to do to get the desired result like for next counter reading of 400 KM system should release order with op1, & op4.
Best Regards
Pravin Gautam

1st order is getting generated by 100 KM. While doing Preventive Maintenance, vehicle will not have any movements so that counter reading at the completion should as same as 100 KM.
I am not clear how & why you entered 200 KM for completion of PM order.
Also, if you complete the 1st Preventive Maintenance at 200 KM, from there only system should calculate the next order. Its not Time based as this will come automatically with predefined frequency. Your plan is Performance based & system will act according to the completion of previous Preventive Maintenance.
I don't find any reason to change behavior which is correct. I am not convinced with the development which is giving wrong details to the business.

Similar Messages

Operations in Preventive maintenance order has to release then only order has to TECO

Hi,Friends
is there any standard in R/3 that as soon as i am not releasing Operations in Preventive maintenance order, order should not be TECO
when ever i have released Operations then only Preventive Maint order has to be TECO
Your response is highly appriciated
Regards,
Kumar

Kumar,
I'm still confused...
When you release the order header (REL), then all operations are also set to released (REL). You cannot individually release operations using the system status.
However, you can set user statuses for each operation which are configured in the IMG.
Please give more details.
PeteA

Preventive maintenance order actual completion time and date

Hey gurus,
In preventive maintenance order the basic and scheduled start dates are picked from the maintenance plan. Now the actual start and end dates are in display mode. My client wants an overall completion time and date of the preventive order and not of individual operations. Also at the end of the month they want to see the total time spent on preventive maintenance. Can you suggest any way to sort out the above problem.
Regards,
Abhishek

hi.
the basic start date and end date is coming from maintenance plan. but you can change that dates according to your requirment. For that you have to remove the automatic schduling check in the dates header in maintenance order. Afetr that you can put basic start and end dates as per your requirement.
Also the actual start and end dates and coming when you confirm the operation.
When you confirm the first operation, that date the system will take as actual start date and the day you confirm you last operation or fully confirmed the order will be taken as actual end date.
So i dont think yu have any problem. You can take basic start or basic end dates for this and change the dates as per your maintenace requirments.

Changing basic finish date in Preventive maintenance orders

Hi Experts,
My requirement is to block PP work centre when maintenance schedule the equipment for preventive maintenance. I am making system condition as zero in generated preventive maintenance order but basic finish date is not changing in the order automatically. Can anybody please explain how to bring this? Finally my requirement is system should change basic finish date and time as time given in operation of task list.
Thanks in advance.
best regards,
Srinivas M

Hi Praveen,
I have done all setting and tested but there is no change.
My client requirement is like this - whenever maintenance plans are scheduled, for the scheduled dates, production capacity should not be considered by production. We could do this for breakdown orders but not happening for PM orders unless we change the finish date.
The issue is to get the finish date automatically when scheduling maint.plans with respect to values given in operations. Please suggest how to get the basic finish dates automatically.
best regards,
-Srinivas

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

Purchase order yet not released

Hi sap gurus,
i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

Hi Prasad
Its simple prasad ur PO is suject to release strategy (Approval process) so the authorized person has to release the PO through the following process -
Just go to Transaction ME29N or ME28, enter ur PO no.
If u follow ME28 give ur release grp / code enetr PO no. and execute ur PO will be reflected in the list put the cursor there and press Release+Save Iconit will release the PO and then u will able make the GR.
If u follow ME29N then give ur PO no. and go to release tab at the header level and press release icon.
Best regards
Vineet Baweja

Blocked sales order is not released from VKM3

Hi
We are using credit management and when a sales order is created with the amount, which is more than credit limit, system is blocking the sales order for delivery. Values are getting updated in FD32 and S066 and S067. When i tried to release the sales order from VKM3, sales order was displayed, but when i selected the release flag and saved it, still the order is not released. Order is having credit limit block in sales order in shipping tab at header level. Why system is not releasing the sales order even it is displayed in VKM3
Please respond
Regards
Srinivas

hi,
check the following steps of assignment you did right or not
1)first check in t- code FD32 U assigned authorization person & each credit limit U shud assign
an authorization person along with credit limit
2) check - conditon records with KRML output is there or not
please read standard SAP config help as a check point doc.....[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
let me know if it is soling your issue
Regards,
Rajeev

Services for Object in Maintenance order can not link

Hello,
"Services for object" in Maintenance Order can not link to share point.
Linking documents from the C drive or Global drive is successful but if SHAREPOINT is used, it fails
When trying to link to a Word document on our Sharepoint... It fails... when I'm in an order... it gives me an error... (displayed on the attached Word file...) and when I'm working within a document... (CVN02) it merely links to my C:\ drive which won't work...
We need to link to our "master" Sharepoint (web based) documents.
Please suggest the solution.
Thanks
Regards
Anil

Anil,
Couldn't you add the web address as the attachment?
Regards
Narasimhan

Check to disallow user to create PO by PM order if PM order is not released

Hi SAP Gurus ,
Can we put such check/validation that user should not allowed to create Purchase order based on PM order , if PM order is not Released .
We received such CR from business ( Client )
Waiting for reply .
Chandan Prayag

Hi,
this can be done through User exit or BADI.
Rgds,
Saurabh

Preventive maintenance order header description

Hi all,
Preventive maintenance order (from Plans) header description is showing the task list title instead of Plan title.
normally Plan header or item header short text will be the order header short text, what is the reason for this
kind of problem.
Pl give your suggestions
Thanks

Hi!
I have checked by creating a maintenance plan with item and task list. I t is taking maintenance item header text in maintenance order. Would you please elaborate. If any user exit or any enhancement has beed done with this acivity?
Regards,
Vaibhav

Restrict the Preventive Maintenance Order creation through IW31 for few users.

Dear Guru's,
Good Day.
My client requirement is he wants to restrict the Preventive Maintenance Orders through Transaction IW31 for few users. Is it possible through authorization? Please do the needful.
Regards,
Bhanu.

possible for order type.
create a role with all order types (optional) including Prev. Maint Order type, obviously having T.code IW31. and create another similar role excluding Prev. Maint Order type.
Assign earlier role to few users (want to give the permission of IW31 Prev.) and later role to all remaining users.
Auth. Object: I_AUART, first test in sandbox or testing client.

How Preventive Maintenance Order Gets Generated Automatically

Dear Sir,
We have defined an equipment requiring Preventive Maintenance every month . We want that Preventive Maintenance Orders for this Equipment should get generated automatically for next comming 3 months .
Kindly guide us as what steps need to be followed so that Orders are generated automatically .
With Thanks & Rgds
Sonia

Hi for this please refer below link as u want call object in monthly basis kindly use single cycle plan for this.
[Please see|http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/abbcf6413911d1893d0000e8323c4f/frameset.htm]
Revert for any queries.
Rip

Preventive Maintenance Order

Hi Experts,
I want to know about Preventive Maintenance,
The Case is I run schedulle preventive maintenance August 3, 2011 call date August 3, 2011 and the order will automatic created on August 3, 2011
my question is system status on order preventive maintenance always Release (REL) or not?
Thanks for the answer
Best Regrads,
Bernardus Jalu

IMG => PM & CS => Maintenance & Service Processing => Maintenance & Service Orders => Functions & Settings => Configure Order types (OIOA)
In that, for order type, check the check box release immediately. That too will work only in IP30 (Automatic Scheduling). In IP10, release should be done manually.

Purchase Requisition created from Maintenance Order can not deleted

Hi Gurus,
I've create a Maintenance Order for External Service (Control Key: PM02) and Purchase Requisition already created related to this Maintenance Order.
But when I want to cancel/delete the Purchase Requisition, there is error message "This item is only deletable via the associated production order". So II can not delete the PR.
Any solution for this problem ?
Regards,
Tri W

Hi,
If the PR has not been approved and no PO has been created yet, you have to delete the external service operation (PM02) in the work order. This should delete the Pruchase Requisitions.
Regards,
Joey

Maintenance Order is not settling

Hi Seniors - While settling the maintenance order, error is coming "Settlement rule is not distributed". Its working for some order types and for some its not working.
Kindly assist me in finding the right node where these settings are maintained. I am unable to figure out...
Thanks & Regards
Manmohan K Bajaj

Hi
Are there more than 2 settlement receivers in the settlement rule?
if yes, you need to maintain a % allocation between the two
Regards
Ajay M

Preventive Maintenance Order is not releasing as per scheduled Planning in Counter Based Plan

Similar Messages

Maybe you are looking for