Preverification failed with error code 255

Hello,
I am having some problems to run a simple Hello World MIDlet application on Ubuntu (2.6.20-15-generic #2 SMP Sun Apr 15 06:17:24 UTC 2007 x86_64 GNU/Linux). I am using Netbeans 6 Beta 2 (with Mobility Pack 2.5.2 ).
I am getting an error in the preverification process:
Preverifying 1 file(s) into /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified directory.
/home/brunogh/NetBeansProjects/MobileApplication3/nbproject/build-impl.xml:424: Preverification failed with error code 255.
I am not sure if it could be a WTK problem, Mobility Pack problem or anything else... I've googled and could not find anything with the error 255, just with the error 1... any ideas/suggestions?
The whole output is below
pre-init:
pre-load-properties:
exists.config.active:
exists.netbeans.user:
exists.user.properties.file:
load-properties:
exists.platform.active:
exists.platform.configuration :
exists.platform.profile:
basic-init:
cldc-pre-init:
cldc-init:
cdc-init:
ricoh-pre-init:
ricoh-init:
semc-pre-init:
semc-init:
savaje-pre-init:
savaje-init:
nokiaS80-pre-init:
nokiaS80-init:
nsicom-pre-init:
nsicom-init:
post-init:
init:
conditional-clean-init:
conditional-clean:
pre-clean:
clean-timestamp:
clean-preprocessed:
clean-classes:
Deleting directory /home/brunogh/NetBeansProjects/MobileApplication3/build/compiled
clean-obfuscated:
clean-preverified:
Deleting directory /home/brunogh/NetBeansProjects/MobileApplication3/build/preverifysrc
Deleting directory /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified
clean-manifest:
clean-jar:
clean-jad:
clean-javadoc:
clean-j9:
clean-ricoh:
clean-semc:
clean-savaje:
post-clean:
do-clean:
deps-jar:
pre-preprocess:
do-preprocess:
post-preprocess:
preprocess:
pre-compile:
extract-libs:
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/compiled
do-compile:
Compiling 1 source file to /home/brunogh/NetBeansProjects/MobileApplication3/build/compiled
post-compile:
compile:
pre-obfuscate:
proguard-init:
proguard:
Building jar: /home/brunogh/NetBeansProjects/MobileApplication3/build/before-obfuscation.jar
ProGuard, version 4.0.1
Reading program jar [home/brunogh/NetBeansProjects/MobileApplication3/build/before- obfuscation.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/wma20.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr082.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/j2me-xmlrpc.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa- jcrmi.jar]
Note: duplicate definition of library class [java.rmi.Remote]
Note: duplicate definition of library class [java.rmi.RemoteException]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa-apdu.jar]
Note: duplicate definition of library class [ com.sun.satsa.acl.ACEntry]
Note: duplicate definition of library class [com.sun.satsa.acl.ACFile]
Note: duplicate definition of library class [com.sun.satsa.acl.ACLFileReader]
Note: duplicate definition of library class [ com.sun.satsa.acl.ACLPermissions]
Note: duplicate definition of library class [com.sun.satsa.acl.ACList]
Note: duplicate definition of library class [com.sun.satsa.acl.APDUPermissions]
Note: duplicate definition of library class [ com.sun.satsa.acl.AccessControlManager]
Note: duplicate definition of library class [com.sun.satsa.acl.JCRMIPermission]
Note: duplicate definition of library class [com.sun.satsa.acl.JCRMIPermissions]
Note: duplicate definition of library class [ com.sun.satsa.acl.PINAttributes]
Note: duplicate definition of library class [com.sun.satsa.acl.PINData]
Note: duplicate definition of library class [com.sun.satsa.acl.PINEntryDialog]
Note: duplicate definition of library class [ java.lang.UnsupportedOperationException]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa-crypto.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr179.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa- pki.jar]
Note: duplicate definition of library class [com.sun.satsa.acl.ACEntry]
Note: duplicate definition of library class [com.sun.satsa.acl.ACFile]
Note: duplicate definition of library class [com.sun.satsa.acl.ACLFileReader ]
Note: duplicate definition of library class [com.sun.satsa.acl.ACLPermissions]
Note: duplicate definition of library class [com.sun.satsa.acl.ACList]
Note: duplicate definition of library class [com.sun.satsa.acl.APDUPermissions ]
Note: duplicate definition of library class [com.sun.satsa.acl.AccessControlManager]
Note: duplicate definition of library class [com.sun.satsa.acl.JCRMIPermission]
Note: duplicate definition of library class [ com.sun.satsa.acl.JCRMIPermissions]
Note: duplicate definition of library class [com.sun.satsa.acl.PINAttributes]
Note: duplicate definition of library class [com.sun.satsa.acl.PINData]
Note: duplicate definition of library class [ com.sun.satsa.acl.PINEntryDialog]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr75.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr180.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr238.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr229.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/j2me-ws.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr234.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr226.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr184.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/mmapi.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr239.jar]
Note: duplicate definition of library class [ java.lang.UnsupportedOperationException]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr211.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/cldcapi10.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/midpapi10.jar]
Note: duplicate definition of library class [com.sun.cldc.i18n.j2me.UTF_8_Reader]
Note: there were 29 duplicate class definitions.
Preparing output jar [home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated.jar]
Copying resources from program jar [home/brunogh/NetBeansProjects/MobileApplication3/build/before-obfuscation.jar]
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated
Expanding: /home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated.jar into /home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated
post-obfuscate:
obfuscate:
pre-preverify:
do-preverify:
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/preverifysrc
Copying 1 file to /home/brunogh/NetBeansProjects/MobileApplication3/build/preverifysrc
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified
Preverifying 1 file(s) into /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified directory.
/home/brunogh/NetBeansProjects/MobileApplication3/nbproject/build- impl.xml:424: Preverification failed with error code 255.
BUILD FAILED (total time: 5 seconds)
Thanks,
Bruno

pre-init:
pre-load-properties:
exists.config.active:
exists.netbeans.user:
exists.user.properties.file:
load-properties:
exists.platform.active:
exists.platform.configuration:
exists.platform.profile:
init:
post-init:
pre-preprocess:
deps-jar:
conditional-clean:
pre-clean:
do-clean:
post-clean:
preprocess:
Created dir: C:\prakash\sip\build\preprocessed
Pre-processing 2 file(s) into C:\prakash\sip\build\preprocessed directory.
post-preprocess:
extract-libs:
Created dir: C:\prakash\sip\build\compiled
pre-compile:
compile:
Compiling 2 source files to C:\prakash\sip\build\compiled
Copying 1 file to C:\prakash\sip\build\compiled
post-compile:
obfuscate-check:
pre-obfuscate:
obfuscate:
Building jar: C:\prakash\sip\build\before-obfuscation.jar
Copying jar file (C:\prakash\sip\build\before-obfuscation.jar) to C:\prakash\sip\build\obfuscated.jar.
Created dir: C:\prakash\sip\build\obfuscated
Expanding: C:\prakash\sip\build\obfuscated.jar into C:\prakash\sip\build\obfuscated
post-obfuscate:
pre-preverify:
preverify:
Created dir: C:\prakash\sip\build\preverified
Preverifying 1698 file(s) into C:\prakash\sip\build\preverified directory.
Error preverifying class com.sun.midp.jadtool.AppDescriptor
VERIFIER ERROR com/sun/midp/jadtool/AppDescriptor.storeKeyStore(Ljava/lang/String;[C)V:
Cannot find class java/io/FileOutputStream
C:\prakash\sip\nbproject\build-impl.xml:269: Preverification failed with error code 1.
BUILD FAILED (total time: 1 minute 7 seconds)
Question:
how can i resolve this problem?
can anyone help me? .........

Similar Messages

  • Preverification failed with error code 255 on Mac OS

    Hello all,
    First up cheers to sun for creating the JME Platform SDK for MAC OS X. I downloaded and installed it the other day. All went well until I tried to compile the blasted thing and I got the following error. I've searched online and come up with nothing.
    /../nbproject/build-impl.xml:309: Preverification failed with error code 255.
            at org.netbeans.mobility.antext.PreverifyTask.execute(PreverifyTask.java:226)
            at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
            at sun.reflect.GeneratedMethodAccessor32.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
            at org.apache.tools.ant.Task.perform(Task.java:348)
            at org.apache.tools.ant.Target.execute(Target.java:357)
            at org.apache.tools.ant.Target.performTasks(Target.java:385)
            at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
            at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
            at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
            at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
            at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:278)
            at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:497)
            at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)Apparently the error is in the build-impl.xml file. When I looked in this file the following line was the one giving me guff.
            <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>Anyone have any ideas??
    Cheers.

    pre-init:
    pre-load-properties:
    exists.config.active:
    exists.netbeans.user:
    exists.user.properties.file:
    load-properties:
    exists.platform.active:
    exists.platform.configuration:
    exists.platform.profile:
    init:
    post-init:
    pre-preprocess:
    deps-jar:
    conditional-clean:
    pre-clean:
    do-clean:
    post-clean:
    preprocess:
    Created dir: C:\prakash\sip\build\preprocessed
    Pre-processing 2 file(s) into C:\prakash\sip\build\preprocessed directory.
    post-preprocess:
    extract-libs:
    Created dir: C:\prakash\sip\build\compiled
    pre-compile:
    compile:
    Compiling 2 source files to C:\prakash\sip\build\compiled
    Copying 1 file to C:\prakash\sip\build\compiled
    post-compile:
    obfuscate-check:
    pre-obfuscate:
    obfuscate:
    Building jar: C:\prakash\sip\build\before-obfuscation.jar
    Copying jar file (C:\prakash\sip\build\before-obfuscation.jar) to C:\prakash\sip\build\obfuscated.jar.
    Created dir: C:\prakash\sip\build\obfuscated
    Expanding: C:\prakash\sip\build\obfuscated.jar into C:\prakash\sip\build\obfuscated
    post-obfuscate:
    pre-preverify:
    preverify:
    Created dir: C:\prakash\sip\build\preverified
    Preverifying 1698 file(s) into C:\prakash\sip\build\preverified directory.
    Error preverifying class com.sun.midp.jadtool.AppDescriptor
    VERIFIER ERROR com/sun/midp/jadtool/AppDescriptor.storeKeyStore(Ljava/lang/String;[C)V:
    Cannot find class java/io/FileOutputStream
    C:\prakash\sip\nbproject\build-impl.xml:269: Preverification failed with error code 1.
    BUILD FAILED (total time: 1 minute 7 seconds)
    Question:
    how can i resolve this problem?
    can anyone help me? .........

  • CPU12.1.0.2.3 opatchauto failed with error code 255.

    I am installing critical patch update 12.1.0.2.3 (15-APR-2015) for Grid Infrastructure standalone on Linux.  It fails with the subject error code and the following additional messages:,
    The user is root. OPatch cannot continue if the user is root.
    opatchauto failed with error code 255.
    The instructions specifically tell me to login as root before installing the patch, so what's up?
    The instructions say to first upgrade OPatch to the latest, which I have done and verified.
    Second, an OCM Response File is mandatory, so I followed the steps to create this file and saved it as /home/grid/ocm.rsp with default permissions 644.
    Third, the instructions say to download the patch and unzip it to an empty location that cannot be /tmp.  I created a new directory /home/grid/foo and unzipped the software to that location.  So, the unzip location is /home/grid/foo/ and in that directory are only two things: a file named PatchSearch.xml and a directory named 20485724.
    Fourth, the readme says the patch must be installed by a user with root privileges, so I have logged in as root.  (Oracle Note 1591616.1 says you must login as root, not just be root like). 
    As root I have set environment variable for ORACLE_HOME pointing to the GI Home, and I set PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/OPatch. 
    Finally, I invoke opatchauto with the required parameters and it throws an error saying I cannot be root.  I fussed with the parameters and the result is always I cannot be root.
    From the documentation,
    Case 3: Patching GI Home Alone
    You should use the following instructions if you prefer to patch Oracle GI (Grid Infrastructure) home alone with this patch.
    Case 3.1: Non-Shared GI Home
    If the GI home is not shared then use the following instructions to patch the home.
    Case 3.1.1: ACFS File System Is Not Configured
    Follow these instructions in this section if the GI home is not shared and none of the Oracle database homes use ACFS file system for its software files.
    Execute the following on each node of the cluster.
    As root user execute:
    # opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>
    My command is,
    opatchauto apply /home/grid/foo/20485724 -oh /u01/app/12.1.0.2/grid -ocmrf /home/grid/ocm.rsp
    So, not a syntax problem.  It simply won't let me run it as root despite that being a hard requirement.

    Hello,
    I tried with above command and faced the a different error . I tried applying patch 4487801.
    ApplySession applying interim patch '4487801' to OH <Oracle_Home>
    ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
    bleProduct" failed.
    The details are:
    OPatch found incompatible or invalid applicable product type with respect to the
    Oracle Home.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code = 74
    I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
    Please guide.

  • Preverification failed with error code 1. BUILD FAILED

    Hallo Oracle,
    Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
    Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
    Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
    Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
    Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
    Error preverifying class com.sun.activation.registries.MailcapFile
        VERIFIER ERROR com/sun/activation/registries/MailcapFile
    .<init>(Ljava/lang/String;)V:
    Cannot find class java/util/Map
    C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
    BUILD FAILED (total time: 25 seconds)
    this is the contents of build-impx.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
    <project name="watsdownapp-impl" default="jar" basedir="..">
        <!--load-properties-->
        <target name="pre-load-properties">
            <property file="nbproject/private/private.properties"/>
            <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
            <available property="user.properties.file.exists" file="${user.properties.file}"/>
        </target>
        <target name="exists.config.active" unless="config.active">
            <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
            <property value="" name="config.active"/>
        </target>
        <target name="exists.netbeans.user" unless="netbeans.user">
            <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
        </target>
        <target name="exists.user.properties.file" unless="user.properties.file.exists">
            <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
        </target>
        <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
            <loadproperties srcfile="nbproject/project.properties">
                <filterchain>
                    <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                    <concatfilter prepend="nbproject/project.properties"/>
                    <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
                </filterchain>
            </loadproperties>
            <property name="deployment.instance" value="default"/>
            <loadproperties srcfile="${user.properties.file}">
                <filterchain>
                    <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
                    <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
                    <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
                </filterchain>
            </loadproperties>
            <loadproperties srcfile="nbproject/project.properties">
                <filterchain>
                    <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                    <concatfilter prepend="nbproject/project.properties"/>
                </filterchain>
            </loadproperties>
        </target>
        <!--basic-init-->
        <target name="exists.platform.active" unless="platform.active">
            <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
        </target>
        <target name="exists.platform.configuration" unless="platform.configuration">
            <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
            <property name="platform.configuration" value="CLDC-1.0"/>
        </target>
        <target name="exists.platform.profile" unless="platform.profile">
            <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
            <property name="platform.profile" value="MIDP-1.0"/>
        </target>
        <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
            <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
            <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
            <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
            <fail unless="src.dir">Must set src.dir</fail>
            <fail unless="build.dir">Must set build.dir</fail>
            <fail unless="dist.dir">Must set dist.dir</fail>
            <fail unless="dist.jar">Must set dist.jar</fail>
            <property name="javac.source" value="1.3"/>
            <property name="javac.target" value="1.1"/>
            <property name="javac.encoding" value="${file.encoding}"/>
            <property name="deployment.number" value="0.0.1"/>
            <property name="deployment.counter" value="000002"/>
            <condition property="no.deps">
                <istrue value="${no.dependencies}"/>
            </condition>
            <condition property="no.preprocess">
                <isfalse value="${use.preprocessor}"/>
            </condition>
            <condition property="no.javadoc.preview">
                <isfalse value="${javadoc.preview}"/>
            </condition>
            <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
                <istrue value="${filter.exclude.tests}"/>
            </condition>
            <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
            <condition property="deployment.do.override.jarurl" value="">
                <istrue value="${deployment.override.jarurl}"/>
            </condition>
            <condition property="config.active.name" value="DefaultConfiguration">
                <length string="${config.active}" trim="true" length="0"/>
            </condition>
            <property name="config.active.name" value="${config.active}"/>
            <taskdef resource="org/netbeans/mobility/antext/defs.properties">
                <classpath>
                    <pathelement path="${libs.j2me_ant_ext.classpath}"/>
                </classpath>
            </taskdef>
            <condition property="skip.deployment">
                <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
            </condition>
            <condition property="app-version.autoincrement.trigger">
                <istrue value="${app-version.autoincrement}"/>
            </condition>
            <condition property="debug.timeout" value="30000">
                <or>
                    <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
                    <not>
                        <isset property="debugger.timeout"/>
                    </not>
                </or>
            </condition>
            <property name="debug.timeout" value="${debugger.timeout}"/>
            <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
        </target>
        <!--cldc-init-->
        <target name="cldc-pre-init">
            <condition property="cldc-platform.trigger">
                <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
            </condition>
        </target>
        <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
            <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
            <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
            <property name="platform.device" value=""/>
            <property name="dist.jad.url" value="file://"/>
            <property name="run.cmd.options" value=""/>
            <condition property="evaluated.run.security.domain" value="">
                <isfalse value="${run.use.security.domain}"/>
            </condition>
            <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
            <condition property="override.jarurl.trigger">
                <and>
                    <istrue value="${cldc-platform.trigger}"/>
                    <istrue value="${deployment.override.jarurl}"/>
                </and>
            </condition>
            <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
            <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="${dist.jad}"/>
                <include name="${dist.jar}"/>
            </patternset>
        </target>
        <!--cdc-init-->
        <target name="cdc-init">
            <condition property="cdc-platform.trigger">
                <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
            </condition>
            <available file="${manifest.file}" property="manifest.available"/>
            <condition property="main.class.applet">
                <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
            </condition>
            <condition property="main.class.xlet">
                <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
            </condition>
            <condition property="manifest.available+main.class+fat.jar">
                <and>
                    <isset property="manifest.available"/>
                    <isset property="main.class"/>
                    <istrue value="${platform.fat.jar}"/>
                    <not>
                        <equals arg1="${main.class}" arg2="" trim="true"/>
                    </not>
                </and>
            </condition>
            <condition property="manifest.available+main.class">
                <and>
                    <isset property="manifest.available"/>
                    <isset property="main.class"/>
                    <isfalse value="${platform.fat.jar}"/>
                    <not>
                        <equals arg1="${main.class}" arg2="" trim="true"/>
                    </not>
                </and>
            </condition>
            <condition property="application.version.invalid" value="true">
                <equals arg1="${deployment.number}" arg2="" trim="true"/>
            </condition>
            <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
            <condition property="sign.jar.trigger" value="true">
                <and>
                    <isset property="cdc-platform.trigger"/>
                    <istrue value="${sign.enabled}"/>
                </and>
            </condition>
        </target>
        <!--semc-init-->
        <target name="semc-pre-init" if="cdc-platform.trigger">
            <condition property="semc-platform.trigger">
                <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
            <condition property="semc.icon.invalid" value="true">
                <or>
                    <contains string="${semc.application.icon}" substring="$${"/>
                    <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <condition property="no.certificateorkey" value="true">
                <or>
                    <isset property="no.application.uid"/>
                    <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
                    <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
                    <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
                    <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
                </or>
            </condition>
            <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
            <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
                <classpath>
                    <pathelement path="${libs.cdc-ant-utils.classpath}"/>
                </classpath>
            </taskdef>
            <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
                <classpath>
                    <pathelement path="${libs.semc-ant-utils.classpath}"/>
                </classpath>
            </taskdef>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="*.sis"/>
                <include name="*.SIS"/>
            </patternset>
        </target>
        <!--savaje-init-->
        <target name="savaje-pre-init" if="cdc-platform.trigger">
            <condition property="savaje-platform.trigger">
                <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
            <property name="savaje.application.uid" value="TBD"/>
            <condition property="savaje.bundle.base.invalid" value="true">
                <or>
                    <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
                    <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
                </or>
            </condition>
            <condition property="savaje.unsupported.main" value="true">
                <or>
                    <equals arg1="${main.class.applet}" arg2="true"/>
                </or>
            </condition>
            <condition property="savaje.icon.invalid" value="true">
                <or>
                    <isset property="no.application.uid"/>
                    <contains string="${savaje.application.icon}" substring="$${"/>
                    <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="bundle.jnlp"/>
                <include name="bundle.policy"/>
                <include name="lib/*"/>
            </patternset>
        </target>
        <!--sjmc-init-->
        <target name="sjmc-pre-init" if="cdc-platform.trigger">
            <condition property="sjmc-platform.trigger">
                <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
        <!--ojec-init-->
        <target name="ojec-pre-init" if="cdc-platform.trigger">
            <condition property="ojec-platform.trigger">
                <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
        <!--cdc-hi-init-->
        <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
            <condition property="cdc-hi-platform.trigger">
                <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
        <!--nokiaS80-init-->
        <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
            <condition property="nokiaS80-platform.trigger">
                <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
            </condition>
        </target>
        <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
            <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
            <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
            <condition property="nokia.icon.invalid">
                <or>
                    <contains string="${nokiaS80.application.icon}" substring="$${"/>
                    <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
                </or>
            </condition>
            <property name="deployment.dir" location="${dist.dir}"/>
            <patternset id="deployment.patternset">
                <include name="${dist.jar}"/>
            </patternset>
        </target>
        <!--init-->
        <target name="pre-init"/>
        <target name="post-init"/>
        <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
        <!--conditional clean-->
        <target name="conditional-clean-init">
            <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
                <srcfiles dir="nbproject">
                    <include name="project.properties"/>
                    <include name="build-impl.xml"/>
                </srcfiles>
            </uptodate>
        </target>
        <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
            <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
        </target>
        <!--deps-jar-->
        <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
        <!--preprocess-->
        <target name="pre-preprocess"/>
        <target name="do-preprocess" unless="no.preprocess">
            <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
            <property name="abilities" value=""/>
            <property name="debug.level" value="debug"/>
            <mkdir dir="${preprocessed.dir}"/>
            <echo message="ignore me" file="${build.dir}/.timestamp"/>
            <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
            </nb-prep>
            <copy todir="${preprocessed.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
        </target>
        <target name="post-preprocess"/>
        <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
        <!--compile-->
        <target name="pre-compile"/>
        <target name="do-compile">
            <fail unless="build.classes.dir">Must set build.classes.dir</fail>
            <mkdir dir="${build.classes.dir}"/>
            <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
                <classpath>
                    <path path="${libs.classpath}"/>
                </classpath>
            </javac>
            <copy todir="${build.classes.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
        </target>
        <target name="extract-libs" description="Extracts all bundled libraries.">
            <mkdir dir="${build.classes.dir}"/>
            <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
        </target>
        <target name="post-compile"/>
        <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
        <!--compile-single-->
        <target name="pre-compile-single"/>
        <target name="do-compile-single">
            <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
            <mkdir dir="${build.classes.dir}"/>
            <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
                <classpath>
                    <path path="${libs.classpath}"/>
                </classpath>
            </javac>
        </target>
        <target name="post-compile-single"/>
        <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
        <!--proguard-->
        <target name="proguard-init" description="Up-to-date check before obfuscation.">
            <property name="obfuscation.level" value="0"/>
            <condition property="no.obfusc">
                <or>
                    <equals arg1="${obfuscation.level}" arg2="0"/>
                    <uptodate targetfile="${obfuscator.destjar}">
                        <srcfiles dir="${buildsystem.baton}"/>
                    </uptodate>
                </or>
            </condition>
            <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
                <srcfiles dir="${buildsystem.baton}"/>
            </uptodate>
        </target>
        <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
            <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
            <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
        </target>
        <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
            <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
            <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
            <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
            <property name="obfuscator.classpath" value=""/>
            <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
            <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
            <mkdir dir="${obfuscator.srcjar.dir}"/>
            <mkdir dir="${obfuscator.destjar.dir}"/>
            <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
            <property name="obfuscation.custom" value=""/>
            <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
            <mkdir dir="${obfuscated.classes.dir}"/>
            <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
            <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
        </target>
        <!--obfuscate-->
        <target name="pre-obfuscate"/>
        <target name="post-obfuscate"/>
        <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
        <!--lwuit-build-->
        <import file="lwuit.xml" optional="true"/>
        <target name="-lwuit-check">
            <condition property="lwuit.allowed">
                <and>
                    <available file="nbproject/lwuit.xml"/>
                    <isset property="is.mesdk_lwuit"/>
                </and>
            </condition>
        </target>
        <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
        <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
            <antcall target="lwuit_build"/>
        </target>
        <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
        <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
        <!--preverify-->
        <target name="pre-preverify"/>
        <target name="do-preverify" if="cldc-platform.trigger">
            <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
            <mkdir dir="${preverify.sources.dir}"/>
            <copy todir="${preverify.sources.dir}">
                <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
            </copy>
            <mkdir dir="${preverify.classes.dir}"/>
            <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
            <copy todir="${preverify.classes.dir}">
                <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
            </copy>
            <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
        </target>
        <target name="post-preverify"/>
        <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
        <!--set-password-->
        <target name="set-password-init">
            <property name="sign.enabled" value="false"/>
            <condition property="skip-sign-keystore-password-input">
                <or>
                    <isfalse value="${sign.enabled}"/>
                    <and>
                        <isset property="sign.keystore"/>
                        <isset property="sign.keystore.password"/>
                        <not>
                            <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
                        </not>
                    </and>
                </or>
            </condition>
            <condition property="skip-sign-alias-password-input">
                <or>
                    <isfalse value="${sign.enabled}"/>
                    <and>
                        <isset property="sign.keystore"/>
                        <isset property="sign.alias"/>
                        <isset property="sign.alias.password"/>
                        <not>
                            <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.alias}" arg2="" trim="true"/>
                        </not>
                        <not>
                            <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
                        </not>
                    </and>
                </or>
            </condition>
        </target>
        <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
            <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
        </target>
        <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
            <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
        </target>
        <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
        <!--create JAD-->
        <target name="add-configuration" unless="contains.manifest.configuration">
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
    </nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
    </nb-output>
        </target>
        <target name="add-profile" unless="contains.manifest.profile">
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
    </nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
    </nb-output>
        </target>
        <target name="create-jad" if="cldc-platform.trigger">
            <fail unless="dist.jad">Must set dist.jad</fail>
            <mkdir dir="${build.dir}"/>
            <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
            <mkdir dir="${dist.jad.dir}"/>
            <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
                <not>
                    <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
                </not>
            </condition>
            <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
                <not>
                    <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
                </not>
            </condition>
            <condition property="contains.manifest.configuration">
                <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
            </condition>
            <condition property="contains.manifest.profile">
                <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
            </condition>
            <property value="" name="evaluated.manifest.apipermissions"/>
            <property value="" name="evaluated.manifest.pushregistry"/>
            <property name="manifest.jad" value=""/>
            <property name="manifest.manifest" value=""/>
            <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
            <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
            <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
            <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
            <property name="manifest.available" value="true"/>
        </target>
        <!--do-extra-libs-->
        <target name="do-extra-libs" if="extra.classpath">
            <property name="dist.lib.dir" value="${dist.dir}/lib"/>
            <mkdir dir="${dist.lib.dir}"/>
            <copy todir="${dist.lib.dir}">
                <path path="${extra.classpath}"/>
                <flattenmapper/>
            </copy>
        </target>
        <!--nokiaS80-manifest-->
        <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
            <fail message="Main class is not set!">
                <condition>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </condition>
            </fail>
            <mkdir dir="${build.dir}/j9"/>
            <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
            <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
            <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
            <property name="manifest.available" value="true"/>
            <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
        </target>
        <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
            <pathconvert property="logo.icon.name" pathsep=" ">
                <path path="${nokiaS80.application.icon}"/>
                <chainedmapper>
                    <flattenmapper/>
                    <globmapper from="*" to="*"/>
                </chainedmapper>
        

    The error says class file is missing, you can try to clean and build.

  • OPatch failed with error code = 255

    Hello,
    I have installed Oracle 9.2.0.1 in my system.
    Now, i want to apply a patch on that Oracle by using Opatch.
    But when i try to apply Optach, i am facing teh follwing error
    "Please make sure you are running OPatch with JRE version 1.4 or later.
    OPatch failed with error code = 255"
    I have installed jre version 6 after that and jdk 1.5. Still i m facing the same issue.
    Please help.
    As i need to upgrade my oracle and i m stuck up with that error.
    Thanks,
    Deepak

    Hello,
    I tried with above command and faced the a different error . I tried applying patch 4487801.
    ApplySession applying interim patch '4487801' to OH <Oracle_Home>
    ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
    bleProduct" failed.
    The details are:
    OPatch found incompatible or invalid applicable product type with respect to the
    Oracle Home.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code = 74
    I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
    Please guide.

  • Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

    Hello,
    Any help on this issue would be greatly appreciated.  I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
    during business hours.  Looking into the event logs, I have found the following:
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066d9669a3e1c.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255.  The machine must now be restarted.
    The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user  for the following reason: No title for this reason could be found
     Reason Code: 0x50006
     Shutdown Type: restart
     Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255.  The system will now shut down and restart.
    I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
    A few hours later, the crash happened again, with a slightly different error:
    The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819.  The system will now shut down and restart.
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066fa9d74c5d7.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005.  The machine must now be restarted.
    The security package Kerberos generated an exception. The exception information is the data
    I have been unable to find a reason for these exceptions and the server rebooting.  Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again?  .
    Thank you,
    Ben

    Hello,
    Any help on this issue would be greatly appreciated.  I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
    during business hours.  Looking into the event logs, I have found the following:
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066d9669a3e1c.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255.  The machine must now be restarted.
    The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user  for the following reason: No title for this reason could be found
     Reason Code: 0x50006
     Shutdown Type: restart
     Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255.  The system will now shut down and restart.
    I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
    A few hours later, the crash happened again, with a slightly different error:
    The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819.  The system will now shut down and restart.
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066fa9d74c5d7.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005.  The machine must now be restarted.
    The security package Kerberos generated an exception. The exception information is the data
    I have been unable to find a reason for these exceptions and the server rebooting.  Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again?  .
    Thank you,
    Ben

  • Backng up failed with return code 255 ...Help!!!

    Hi,
    I am in a process of backing up Oracle application server 10g through "Configure Backup/Recovery Settings" feature of the app server, when I provide the directories for:
    1. Log File Location     
    2. Configuration Files Backup Location     
    3. Metadata Repository Database Backup Location
    4. Metadata Repository Database SID
    and click on OK it provides me the following error:
    "The command <ORACLE_HOME>/perl/5.6.1/bin/MSWin32-x86/perl.exe <ORACLE_HOME>\backup_restore/bkp_restore.pl -m configure -h <ORACLE_HOME> -f > <ORACLE_HOME>\backup_restore\logs/2008-12-06_13-36-02_output.log failed with return code 255"
    And the log file says -"Unable to get dbid from the database."
    Please Help..!!!
    Thanks

    This turns out to be a non-issue. I re-installed JDK 1.6,
    thinking this might have been the problem, but as it turns out,
    this Windows machine was a VM, and there haven't been any issues
    with other VM's, only this one, leading me to conclude the problem
    was the VM. We've since migrated off this machine and recycled
    it.

  • CompileXIB /usr/bin/ibtool failed with exit code 255

    Hi
    We have several build machines located at different sites. Recently all the machines, on one site, started to fail with this error
    /usr/bin/ibtool failed with exit code 255
    during a CompileXIB of a updated file. By reverting the change line by line I discovered that the issue was caused by
    <customView appearanceType="lightContent" translatesAutoresizingMaskIntoConstraints="NO" id="119" customClass="CSIWhiteBackgroundHeaderView">
    where the text in red was recently added. If I remove the appearanceType the build succeeds.
    But I can't understand why this is only affecting some of our build machines. All of them are using XCode version 5.0.2 (5A3005). Furthermore this change has not affected the developers workstations.
    The committer usd XCode 5.1. But if appearanceType was specific to XCode 5.1 I would expect all the builders to complain.
    To resolve this problem I tried a deep clean (i.e. Hold alt - Clean Build Folder ...) & I manually delete all the dervived data in /Users/<myuser>/Library/Developer/XCode/DervivedData. But this had no impact.
    Another difference between the machines is the OS. The failing builds are on OSX 10.8.4. The successful ones are on 10.9.
    Any ideas?
    Regards
    Shane

    Our company has just moved from Xcode 4.6.3 to Xcode 5.0.2 and have experienced the exact same issue. Sometimes everything builds fine, sometimes it will give that xib file error. The xibs failing are not always the same.

  • ORA-27369: job of type EXECUTABLE failed with exit code: 255

    I created a job in the DBMS_SCHEDULER with the following code -
    BEGIN
    DBMS_SCHEDULER.CREATE_JOB (
       job_name          =>   'POSPAY_CHECK_JOB',
       job_type          =>   'EXECUTABLE',
       job_action        =>   '/dev/POSPAY_USC2_CHECK.sh',
       auto_drop         =>   FALSE,
       enabled           =>   TRUE);
    END;
    / When I tried to run the job, I got this error -
    "ORA-27369: job of type EXECUTABLE failed with exit code: 255 STANDARD_ERROR="execve: No such file or directory""After reviewing the job in the dba_scheduler_jobs view, I noticed that ENABLE = FALSE. When I ran the code to enable it, it STILL remained FALSE.
    BEGIN
    DBMS_SCHEDULER.ENABLE('POSPAY_CHECK_JOB');
    END;
    / Can someone please let me know why the new job will not run?
    Why can't I ENABLE it?
    Thanks!

    Additional Info - Here is the data for the POSPAY_CHECK_JOB from the DBA_SCHEDULER_JOBS view -
    select * from sys.dba_scheduler_jobs where job_name like 'POSPAY_CHECK_JOB';
    OWNER               APPS
    JOB_NAME          POSPAY_CHECK_JOB
    JOB_SUBNAME     
    JOB_CREATOR          APPS
    CLIENT_ID     
    GLOBAL_UID     
    PROGRAM_OWNER     
    PROGRAM_NAME     
    JOB_TYPE          EXECUTABLE
    JOB_ACTION          /dev/POSPAY_USC2_CHECK.sh
    NUMBER_OF_ARGUMENTS     0
    SCHEDULE_TYPE          IMMEDIATE
    JOB_CLASS          DEFAULT_JOB_CLASS
    ENABLED               FALSE
    AUTO_DROP          FALSE
    RESTARTABLE          FALSE
    JOB_PRIORITY          3
    RUN_COUNT          1
    FAILURE_COUNT          1
    RETRY_COUNT          0
    LAST_START_DATE          19-NOV-09 10.16.34.502747000 AM -06:00
    LAST_RUN_DURATION     0 0:0:0.55307000
    LOGGING_LEVEL          RUNS
    STOP_ON_WINDOW_CLOSE     FALSE
    INSTANCE_STICKINESS     TRUE
    JOB_WEIGHT          1
    NLS_ENV               NLS_LANGUAGE='AMERICAN' NLS_TERRITORY='AMERICA' NLS_CURRENCY='$' NLS_ISO_CURRENCY='AMERICA' NLS_NUMERIC_CHARACTERS='.,' NLS_CALENDAR='GREGORIAN' NLS_DATE_FORMAT='DD-MON-RR' NLS_DATE_LANGUAGE='AMERICAN' NLS_SORT='BINARY' NLS_TIME_FORMAT='HH.MI.SSXFF AM' NLS_TIMESTAMP_FORMAT='DD-MON-RR HH.MI.SSXFF AM' NLS_TIME_TZ_FORMAT='HH.MI.SSXFF AM TZR' NLS_TIMESTAMP_TZ_FORMAT='DD-MON-RR HH.MI.SSXFF AM TZR' NLS_DUAL_CURRENCY='$' NLS_COMP='BINARY' NLS_LENGTH_SEMANTICS='BYTE' NLS_NCHAR_CONV_EXCP='FALSE'
    FLAGS               2146384

  • Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

    I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

    Sorry to bother you.
    I could find the answer after searching previous posts about this language problem.
    Had to change my language in AAM profile and then download PS CS6 again ( english version ).
    Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
    restart application and Voila.
    Greetz, Jeroen

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

    I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
    The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
    Thanks,
    Venu S.
    Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

    Hi Venu S,
    Based on my research, you might encounter a known issue, please try the hotfix in this KB:
    http://support.microsoft.com/kb/928385
    Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
    The version of Windows Server you are using
    The result of SELECT @@VERSION
    The scenario when you get this error
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for

  • My airplay button is not showing up on my iPad?

    And I am swiping up from the bottom of the pad. Help plz.

  • Error Illustrator-"Cna't paste the objects."

    Our designer is using Illustrator 10, OS - Window XP Professional, HP core 2 duo, 2GB RAM, 20 GB free disk space. After using the software for a while it will give an error message when the graphic artist tries to "PLACE" a tiff file on the Illustrat

  • I don't have the Camera Shake Reduction Option in Photoshop CC

    I don't have the Camera Shake Reduction Option in Photoshop CC, why is this and how can do I resolve this?  I have a CC subscription, I have Photoshop version 13.1.2.x64.  Thanks.

  • Restrict Usage of Order Types by Users

    Hi We have two order types existing in SAP and interfaced with MAXIMO. Data flows into these order types via XI Interface from MAXIMO. So, in SAP my client wants to restrict usage of these two order types by SAP users. Is there a way, do i need to co

  • IPod touch won't sync, Other Data keeps increasing

    iTunes version 12.0.1.26 iPod iOS 8.1.2 I received a new 64GB iPod touch this Christmas. I've had several issues with it, but they were mostly just irritating and not actually stopping me from using the iPod (can't make new playlists on iPod itself,