Preview and inactive links

I created a pdf document from a Word document using the Print and Save as PDF choices. The url links that exist in the Word document work properly. When I open the pdf document in Preview, the links are not active. When I bring up this document in Adobe Reader, they work properly. Is this a limitation of Preview interpreting links from a pdf created from a Word document? If I create a pdf the same way (via the built-in pdf capability of OSX) from a browser page with links, those links work fine in Preview. I'm guessing that this is a problem with the OSX built-in pdf capability to deal properly with links in a Word document. By the way, I'm using Word 2011 but this also happens with Word 2008.

Are you kidding me? I was way off with what i had in mind. That was so simple. I had to read more on that...Anyway, Thank you so much!
My goal is to make this work with Nested Data Sample
Thank you! Thank you!

Similar Messages

Displaying active and inactive links in a table.

Hi all,
I'm trying to display active links and inactive links in a table. The problem that I have is that the inactive links are grey, I would like them to appear like normal text in a textview. From what I understand, I can't have two different celleditor types in the same column, so there goes that idea.
Does any one have any suggestions on how I may be able to display this intermixing?

Hi Michael,
you're right, as for now there is only one cell editor assotiated with one column, probably in near future that won't change.
Maybe you should try to change the stylesheet of your application?
Best reagrds,
Christian

Add the Show Filters, Hide Preview and Refresh links from the UWL

I've searched the forum and was unable to find an answer to this question. In the UWL main screen, "Show Filters" and "Hide Previiew" appear in the right corner of the UWL iView (not in the tray, on the actual iView).
I would like to add "Refresh" link there as well. This doesn't appear to be handled in the iView properties or the XML file. We've done this before, but I can't seem to remember how.
Has anyone else done this?
Thanks!
CS

Hi,
At least you can add the refresh action there by modifying the view configuration XML. Check my answer in another thread:
UWL custom refresh button
Regards,
Karri

Adding New View Objects/Link on "Preview and Print" - Order Acknowledgement

Hi,
Can we add New View Objects/View Links for the existing "Preview and Print" Order Acknowledgement.
I want to add for the 2 new functionalities i.e., for Charges (from OE_PRICE_ADJUSTMENTS_V ) and the Line Level Notes, which is currently not supported by Oracle.
Can anyone help me on acheving this functionality?
Looking forward for your response.
Thanks in advance,
Regards,
Muru

You can do that. You should first create the new business objects(AM, VO, VL) in jdeveloper, create your new regions in jdeveloper, associate the AM to the top level region(stackLayout) you create. Use personalization and add a stack layout in the Preview and Print page, set the extends property to point to the new region which you had created. Donot forget to deploy all the files in middle tier before doing the personalization.
The AM which you had added to the stackLayout will automatically be nested with the root AM of the page during runtime.

Losing links of images on Preview and Publish.

Some images are not linking on Preview and Publish (Beta7). I have relinked (even going back to the original in Photoshop) and re-published again, those link up but then other images stop linking and do not load. Ones that were working fine just minutes ago.

Hi COLBY,
Here is the link to a recently published site. On the Publish I did about 30 min. before all the images were loading. Now on this page two are not. When I wrote the question yesterday 6-7 images were missing, randomly. One than publish again three, than more. Since yesterday I went back to a earlier saved version and made some minor type changes and links, not involving any of these images. The first time I published today, all the images were linked. It seems the longer I work with the file the more images seem to disappear. I have only had this problem since I updated to the Beta 7, on Friday. http://amberart.businesscatalyst.com/cockroaches.html
Thanks.
Linda Nye

Why text and button links on a PDF do not work in the iPad

I have Acrobat Pro 9.2.3 and InDesign CS5.
I've tried creating both button and text links directly from InDesign (Window > Interactive > Hyperlinks). I then export the multi-page PDF with "Acrobat 6 and Above" selected as well as the "Hyperlinks" and "Interactive Elements" checked. When I open the PDF in my iPad, none of the text or button links work.
Then . . .
I tried opening the same multi-page PDF in Acrobat Pro, and manually created the link boxes (Tools > Advanced Editing > Link Tool). The iPad still can't interprete these two interactive elements.
Any clues what I'm doing wrong?

Try exporting as ePub - now test inside Digital Editions and if OK - drag the file into iTunes and synch to iPhone/iPad.
It's probably a Preview issue as mentioned but exporting to ePub is good fun!
J.

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

Preview and Open dialog box on initial start of program?

Okay, I understand that it might be beneficial when starting Preview that an open dialog box also pops up. However, I find it VERY annoying that it does it when I double click on a PDF and Preview goes through it's initial startup. It NEVER did this before...am I missing some setting?
I know it may seem like a small annoyance but, for some reason, it really bugs me.

Thanks. I guess I wasn't very effective with my search phrases before posting.
It did solve the annoyance but definitely seems like a bug to me. I will post in feedback to Apple since opening a pdf in preview and then automatically opening an open dialog box has no value. It also shouldn't be linked to Documents and Data in icloud being checked or not.

Preview and TextEdit quit unexpectedly (fresh install)

I just installed OS X Lion but i can't open Preview and TextEdit.
Exception Type: EXC_BAD_INSTRUCTION (SIGILL).
Is anyone else encountering this?

I think I found the cause of the problem: you cannot have any symbolic links or alias in your home directory.
Delete the alias, and then Preview.app and Textedit.app will open again without error. Once you succesfully launch the applications, you can then go back a re-create the symbolic links.
See: http://lnxg.wordpress.com/2011/07/21/psa-textedit-preview-10-7-crash/

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

Preview and pdf's in Safari

Hi,
I prefer to view pdf pop up links in Acrobat Reader. There seem to be more steps to save a pdf opened in Preview than the one step to save a pdf opened in Reader. I used "more info" in Finder to change the preference for all pdf files to open in Acrobat. This works great except in Safari. Preview still opens the pdf links in Safari. Is there some way to stop Preview and use Acrobat for viewing pdf's in Safari? Acrobat is opening pdfs everywhere but in Safari.

This may be way out in left field because I couldn't really follow what all the entries were saying.
However, after my operating system was upgraded to OS X 4.8, I was unable to download PDFs. Safari always appended ".download" to the PDFs I was viewing. When I tried to save the document I was forced to use the .download extension.
Then when I tried to view the saved file, I was told that it was not valid download file.
To make a long story short, I quickly read through all the entries - I wasn't going to start deleting things as some of the entries suggested - but I did follow one suggestion, and that was to re-install Adobe Reader.
That fixed it. It all works quite differently than it did before my operating system was upgraded - but at least I can now SAVE and THEN READ a PDF now.
So, indirectly, thanks everyone for your help.
iBook G4 Mac OS X (10.4.8)

LR 4 - image does not appear in Preview and will not print`

The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?

The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
    Re: LR 4 - image does not appear in Preview and will not print`
    created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Wrong print preview and printed color from Lightroom 1.3

I am running Vista Ultimate and i just installed the driver for my Canon PIXMA Pro9000.
When i try to print from Lightroom 1.3 the colors are very muted, even when i do print preview the colors are wrong in the print preview screen.
No matter what i do i cant seem to get lightroom to Print Preview AND print with the right colors.
The image on this link http://www.pbase.com/charld/image/94711330
(on the left) is what i see and get when i do a print preview and print and my monitor image is on the right.
If i use Canon DPP the colors are not that bad, its a bit dark but that was easily fixed and i can get it quite close to what i see on the screen. My monitor is not calibrated..The images were all shot in RAW and converted to DNG...Do i need to re-install Lightroom as i don't think print preview has anything to do with the printer i have attached....
Thanks

I got the solution from another forum:
http://www.lightroomforums.net/showthread.php?t=1613
1. in the Print module, clicking on the Print Settings button ...
2. Choose your media type
3. Under Print Quality choose High
4. Under Color Intensity choose Manual. In the subsequent dialogue box choose None.
5. In the Print right hand panel under Color Management choose your print media - PR1 for Photo Paper Pro, SG1 for semi-gloss &c
6. Rendering intent Perceptual.
7. Hit Print and OK.
this resolved my issue!!

Preview and printer skipping pages

I am trying to print some articles from online. The articles should come out as 4 pages long. Instead, it prints pages 1, 2 and then skips to pages 4 (which consists only of the links at the bottom of the website, which are outside of the "frame" that the article is in [hope i'm using the word frame here correctly]). When I try a print preview first, it shows up like that as well. pages 1, 2...then 4.
Anybody know what's going on?
Thank you very much.
(see printer type below)
MacBook Mac OS X (10.4.9) using Preview and HP Deskjet 3940

wow. went travelling and forgot all about this.
but for anyone else ever having the same problem, using a different browser did indeed work. easy fix after all. weird, but easy.
thanks!

Previews and Slideshows: a perennial question

Hi all,
I make slideshows in Aperture (and iMovie and iDVD) only once a year, and it seems like I have to re-learn it every time. To all the people who claim that iMovie and iDVD are intuitive, I guess you and I are very different!
But that's beside the point: I know that, for Aperture slideshows to look good, previews have to be set to (at least) the resolution of the playing device. And I know that that's spelled out (a little bit) in the Aperture manual in the Chapter 5 section on "Previews."
My first question is a bit of a vent: why is there no discussion of preview quality in Chapter 20 on "Slideshows" (where it might be useful!)?
And then my real question is: can I -- just before generating the slideshow -- simply "select all" of the versions I want in the slideshow, raise the quality on the previews in "Preferences" and then "Regenerate Previews" -- and then generate the slideshow. (And then go back to previews in Preferences and set it where it was?)
Thank you!

On the second page in the Slideshow chapter of the User Manual, this section is separated and highlighted:
"About Displaying Sharp Images in Slideshows
To display slideshows at the best quality, you should set Aperture to create high-resolution previews. In addition to setting previews to their highest resolution, you should also use full-size previews to prevent upscaling with large displays. If previews are not available, images in the slideshow may not be as sharp as they would be otherwise. For more information about creating high-resolution previews, see Working with Preview Images." (http://documentation.apple.com/en/aperture/usermanual/#chapter=22%26section=2)
The Previews page (linked in the original) is one of the most comprehensive of all the help pages.
(Sent from my magic glass.)

Preview and inactive links

Similar Messages

Maybe you are looking for