Preview and Printing Document Problems

I am new to Adobe Livecycle and have been askedto create some forms to be placed on the internet. Please note that I am a user and not a programmer. I am in version 8.2. I have created a form and believe I have it in the correct format. I created master pages, and subforms. Everything looks correct on the screen, but I cannot view anything in the preview pdf and cannot print anything. My presence is set to visible on the subforms and the view interactive forms is set.
Any help you could give would be greatly appreciated.

Change File Associations in Mac OS X

Similar Messages

Preview and printing scale problems

Hi, I couldn't find a forum for preview. iphoto was the nearest...
basically I am just trying to print an image opened in preview to a fairly small size and no matter what I do it always seems to scale it to fit the A4 paper size. If I go to Tools - Adjust size - and make it quite a small image, (5cms across for example) when I go to print it it still just blows it up as before, all blurry and pixely. really I don't seem to have lots of options, I have, of course, deselected the scale-to-fit button. I have tried reducing the number in the % field. but nothing...

Note the Scale option in the Print Dialogue - Just below 'Auto-rotate'. It's set to 394%. What happens if you set it to 100%?
Regards
TD

Major problem saving and printing documents on two computers

This is a bizarre problem that seems to have been transferred from my old MDD to my new Mini when I migrated all my old data and it has me baffled. My apologies if this explanation seems long and complicated but I want to be pretty thorough.
About a month ago I started experiencing a problem with printing. I noticed when printing a sheet of business cards that the page was getting compressed, for lack of a better word, vertically. This was very noticeable because the trim marks on the side of the page were not lining up with the perforations and each row of cards was getting progressively closer to the top as each row was printed. In other words, the first row of cards was okay but then the next row was a little too far "north", the next row a little more, the next row a little more, etc. The bottom of the page was not cut off, it was just squeezed up a bit but not enough that you could tell that the proportions were off. Now I see that many of my documents are like that no matter what application I've use to create them – Pages, Illustrator, Avery DesignPro. What's even worse, I've used Pages to create a sheet of business cards for a friend and Illustrator to make packaging labels and she's having the same problem printing the PDFs of the labels on a different computer. What this seems to tell me is that something has been corrupted and the computer is saving messed up files.
So, about ten days ago I got a Mini and migrated my data using Migration Assistant. And the problem has now been transferred to the Mini. So I now have two Macs connected to two different HP printers that are both incapable of printing (and apparently saving) documents in the proper proportions.
Now, a truly weird thing is that I printed a test sheet of business cards from the Mini on the printer connected to the MDD (via printer sharing) and it appeared that the document printed at the correct length. However, another document, a sheet of labels created in Illustrator, printed at the right length but one edge was slightly cropped off. Grrr.
Anyway, as I said, until about a month ago everything worked fine so something got messed up at that time to cause this problem with saving and printing documents. I need to get this resolved for business reasons – I'm an aspiring designer – but the only thing I can think of doing is wiping out my Mini and reloading everything except my account settings from Time Machine unless someone has advice on what to do. Help! (And yes, I've checked to see that page scaling was always set at 100%.)

Well, I've just about had it. I erased the disk, reinstalled the OS, Adobe CS4, and iWork. I did not use Migration Assistant this time to restore my settings but still my Mac prints documents in the wrong dimensions. Could this be a sudden HP problem? It seems to me some system setting somewhere is making my computer save and print documents in the wrong size. I now have a computer that is almost useless for designing. Lucky me.

Word for mac won't show doc in print preview and prints blank page.

I have a document from layoutready.com that I have been editing and it is a .doc file originally and won't show up. I've tried saving it as .docx and still nothing. Also, when I create a new document and put in a shape or a text box, it won't show up in print preview or print either. Excel is fine. I can insert a shape onto a worksheet and previews and prints fine. I have sent a document to a friend to test and when they open it in their word (on a pc) it previews and prints fine. I called stupid %*&#@ Microsoft and they want me to sign up for $99 Office 365 to get support. Ergh. Should I try to re-install Word? Oh, and I also updated to Yosemite last night.

Then post your question on the Microsoft Mac forums since it's their software you'r having problems with. These forums are for troubleshooting Apple products
http://answers.microsoft.com/en-us/mac

Error in Preview and Print in Crystal Report Viewer 2.0.0.7 in Workstation

Hi Guys,
I am encountering a problem when clicking preview and print in Crystal Report Viewer 2.0.0.7. It returns an error
Unhandled exception has occurred in your application. If you click Continue the application will ignore and attempt to continue. If you click quit, the application will close immediately. Load report failed.
I already install the runtime crruntime_120_mlb, . net framework 3.5 sp1 and the add-on itself. The viewer is working properly in SAP Server. My version of SAP is SBO 2007 A SP00 PL10.
Regards,
Michael

here's the detailed error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
CrystalDecisions.Shared.CrystalReportsException Load report failed. --- System.Runtime.InteropServices.COMException (0x80004005) The device is not ready.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
   at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
   at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3620 (GDR.050727-3600)
    CodeBase fileCWINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll
SAP_CR
    Assembly Version 2.0.0.7
    Win32 Version 2.0.0.7
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRSAP_CR.exe
Interop.SAPbouiCOM
    Assembly Version 8.0.0.0
    Win32 Version 8.0.0.0
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.SAPbouiCOM.DLL
System.Windows.Forms
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll
System
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3614 (GDR.050727-3600)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll
System.Drawing
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll
CustomMarshalers
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32CustomMarshalers2.0.0.0__b03f5f7f11d50a3aCustomMarshalers.dll
Interop.CR_Crypto
    Assembly Version 6.0.0.0
    Win32 Version 6.0.0.0
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.CR_Crypto.DLL
System.Data
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll
System.Configuration
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll
System.Xml
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3082 (QFE.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll
System.Transactions
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll
System.EnterpriseServices
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll
CrystalDecisions.Windows.Forms
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Windows.Forms12.0.2000.0__692fbea5521e1304CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Shared12.0.2000.0__692fbea5521e1304CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportSource12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportSource.dll
CrystalDecisions.CrystalReports.Engine
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.CrystalReports.Engine12.0.2000.0__692fbea5521e1304CrystalDecisions.CrystalReports.Engine.dll
System.Web
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3618 (GDR.050727-3600)
    CodeBase fileCWINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll
CrystalDecisions.ReportAppServer.CommLayer
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CommLayer12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ClientDoc12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.DataSetConversion
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportAppServer.DataSetConversion12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.DataDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.Controllers12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CubeDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ReportDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.0.840
    CodeBase fileCWINDOWSassemblyGACBusinessObjects.Licensing.KeycodeDecoder12.0.1100.0__692fbea5521e1304BusinessObjects.Licensing.KeycodeDecoder.dll
JIT Debugging
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example
configuration
    system.windows.forms jitDebugging=true
configuration
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Crystal Report Preview and Print error

Hi,
I am trying my first Crystal report in SAP; I have created one report using OITE table and run it in Crystal Designer without any problem; Then I added it to SAP / Manager Crystal Report / New Report, but I get the following error message when I click the Preview and Print button every time;
The file does exist and the location is setup correctly; I dont understand why SAP can not find the file; Any comments?
SAP Crystal AddOn
Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
OK

Hi,
When you google on "[Could not load file or assembly CrystalDecisions|http://www.google.com/search?q=CouldnotloadfileorassemblyCrystalDecisions]" you will find quite some hits.
One that might be important for you could be http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/b0fc930f-5fc8-4475-bfe7-ad56616e838d/
That is depending on how the report is made.
Another option might be
http://www.velocityreviews.com/forums/t382557-could-not-load-file-or-assembly-crystaldecisionsweb.html
Best regards,
Peter

How to Customize Preview and Print / Sales Order Acknowledgement

Hi,
Our client needs some additional attributes on a sales order acknowledgement print ( Preview and Print ) output.
The current layout is based on ONTORDDFFN.xml and ONTORDDFN.xsd
How to customize the same to include additional attributes like Territory and Shipping instructions etc.These new fields are not there in xsd or the xml.
Appreciate your great help.
Regards,
Raju

Per Oracle you need to implement the method "getPrintExtensionXMLFragment" of PrintExtensionObject.java. Oracle has given the flexibility that getPrintExtensionXMLFragment can either return a XMLFragement or a sql query.. If the code in getPrintExtensionXMLFragment returns a string which starts with "select" Applications code will execute that query and the corresponding XML will be appended to the main XML. This needs to be written in a CustomClass and then set to the Profile " OM: Printed Document Extension Class Name".
I would like to know if somebody has extensively added columns at the different levels (header, lines, Addresses, Line Discounts, Charges) and the same additional cols. were implemented in the CustomClass. Let me know.
Regards,
Rajesh.

Preview and Print restrictions in PDF

Hi there,
I bought the Adobe Type Basics pack, and I would like to use one of the fonts that has the Preview and Print license.
The Preview and Print license states that "Preview & Print allows the font, either fully or as a subset, to be embedded in an electronic document solely for the purpose of viewing that document on screen and/or printing that document. While a font with a Preview & Print embedding permission (either through data in the font file or the font’s license agreement) may be embedded in an electronic document, the embedded font may not be used to further edit the document it is contained in or to edit or create other documents."
If I use this font in a PDF file meant to be sold/distributed, am I violating any of these terms? As far as I know, you can't create an "editable PDF." PDFs are, to my understanding, relatively static--so I do not understand why there is such specific wording about the prohibition of "further edits."
I am using MAC Pages, so I could use the additional password protection option (under the "Save as PDF" not "Export as PDF" section) to prevent people from "copying text, images, and other content." I presume "other content" covers fonts, but I'm not sure. And I don't know if the password encryption will prevent "editing." Technically doing so would be encrypting the PDF, I believe. However, this would not be bulletproof protection. And I do not know if that will prevent font extraction.
I would appreciate some help. From what I understand, all these points seem more relevant for PSD, AI, EPS and other workflow-type files.
Cheers

Thanks for posing this question.
Although fonts have embedding restrictions baked into the font such as preview and print, the real restrictions are to be found in a font's EULA (End User License Agreement) which may have other restrictions including payment of royalties on copies of PDF files or any other asset in which the fonts are embedded.
In the case of any and all fonts sourced from Adobe, not only do you have at least preview and print embedding privileges, but there are no restrictions or royalties required for distribution of files (i.e., PDF, EPS, eBooks, etc.) in which the Adobe fonts are embedded.
In other words, you are “good to go” with Adobe fonts. On the other hand, make no assumption about fonts sourced from other font foundries. Many do not provide such liberal terms!
- Dov

Preview and print..

i trying to make my system have preview and print button...
preview button--> how can i make it?? if i want to preview it in a text file and with a specific format.
--> any sample or tutorial i can follow to learn this??
--> can i used JEditorPane for this as it is just a window-based system??
print button --> i am able to get some help, but i don't know how to specify the file that i want to print??
--> any sample or tutorial i can follow to learn this??

anyone can help me to solve this problem?? i need to generate report from the system in java and in the report i have 2 buttons which is preview and print....
i was thinking to used the textArea to let user preview report, can this work??
can i print out the textArea wording after i press the "print" button....
thanks for all your helps....
Edited by: ling on Mar 23, 2008 11:58 PM

Preview and Print not seen in Actions Tab

Hi,
I could not see the preview and print option in the actions tab of the sales order, from where is it originated???
What should i do to see this.
Regards,
prasad

Guys,
My XML Publisher was not installed, Thats why this problem.
Enabled this, Issue is solved now.
Prasad

"Preview and Print " report extension in Order Management

Looking for help on how to add extra information to this report.. I did setup the profile to implement the how to implement PrintExtensionObject interface with method getPrintExtensionXMLFragment.... and created the class file and compiled on Java_top. ( Am very new to java)
-- enabled the logs
-selected an order in OM and via action button (preview and print)
--Shows error message "An error occured during the PDF document generation. Please contact your system Administrator."
As per the fnd logs table (SELECT * FROM fnd_log_messages WHERE message_text LIKE '%PrintAM:writeBusinessDoc%';)
shows the following ..
PrintAM:writeBusinessDoc: Checking for Customer Extension Class
PrintAM:writeBusinessDoc: Custom Extension Class Found
PrintAM:writeBusinessDoc:Successfully instantiated the Custom Extension Class
PrintAM:writeBusinessDoc: Retrieving Custom Extension XML failed
So I am sure that the issue is on the class which I made.. but not sure what is the cause (Again as mentioned I am new to java) and can anyone help me on this..
( I did check the PrintAMImpl.java which calls this profile (Custom class) and can see the above message.
(Oracle PrintAMImp.java related codes are this
s29 = ((OADBTransaction)getDBTransaction()).getProfile("ONT_PRINT_CUSTOMER_EXTN_OBJECT");
if(s29 != null || s29 == "")
if(flag3)
logfile.writeln("PrintAM:writeBusinessDoc: Custom Extension Class Found", 1);
logfile.writeln("PrintAM:writeBusinessDoc: Instantiating the Custom extension class", 1);
if(flag6)
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc: Custom Extension Class Found", 1);
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc: Instantiating the Custom extension class", 1);
PrintExtensionObject printextensionobject = (PrintExtensionObject)Class.forName(s29).newInstance();
if(flag6)
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc:Successfully instantiated the Custom Extension Class", 1);
if(flag3)
logfile.writeln("PrintAM:writeBusinessDoc: Successfully instantiated the Custom Extension Class", 1);
byte abyte0[] = printextensionobject.getPrintExtensionXMLFragment(s, s1).toByteArray();
if(flag6)
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc:Getting the data from the user impl class", 1);
if(flag3)
logfile.writeln("PrintAM:writeBusinessDoc: Getting the data from the user impl class", 1);
bytearrayoutputstream.write(abyte0);
if(flag6)
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc:Writing the data to the main xml", 1);
if(flag3)
logfile.writeln("PrintAM:writeBusinessDoc: Writing the data to the main xml", 1);
} else
if(flag3)
logfile.writeln("PrintAM:writeBusinessDoc: No Custom Extension Class Found", 1);
if(flag6)
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc: No Custom Extension Class Found", 1);
catch(Exception exception1)
if(flag2)
logfile.writeln((new StringBuilder()).append("PrintAM:writeBusinessDoc: Retrieving Custom Extension XML failed for ").append(s29).append(" with Exception \n").append(exception1.toString()).toString(), 1);
if(flag6)
oadbtransaction.writeDiagnostics(s6, "PrintAM:writeBusinessDoc: Retrieving Custom Extension XML failed", 1);
**********************THIS IS CUSTOM CLASS I WAS TRYING TO DO ********************************(not a java person)
package oracle.apps.ont.print.server;
import com.sun.java.util.collections.HashMap;
import java.io.*;
import java.sql.SQLException;
import java.util.Hashtable;
import java.util.Properties;
import oracle.apps.fnd.common.AppsContext;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.common.EnvironmentStore;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.cp.request.CpContext;
import oracle.apps.fnd.cp.request.LogFile;
import oracle.apps.fnd.cp.request.OutFile;
import oracle.apps.fnd.cp.request.JavaConcurrentProgram;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAFwkConstants;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.server.OADBTransaction;
import oracle.apps.fnd.framework.server.OADBTransactionImpl;
import oracle.apps.fnd.framework.*;
import oracle.apps.okc.printing.server.ContractTermsXMLGenerator;
import oracle.apps.okc.util.server.TermsConstants;
import oracle.apps.okc.util.server.TermsUtil;
import oracle.apps.ont.print.blanket.server.HeaderVOImpl;
import oracle.apps.ont.print.blanket.server.HeaderVORowImpl;
import oracle.apps.ont.print.blanket.server.LinesVOImpl;
import oracle.apps.ont.print.order.server.EndCustomerVOImpl;
import oracle.apps.ont.print.server.PrintExtensionObject;
import oracle.apps.qp.print.blanket.server.ModAtrbsVOImpl;
import oracle.apps.qp.print.blanket.server.ModHdrVOImpl;
import oracle.apps.qp.print.blanket.server.ModLinesVOImpl;
import oracle.apps.qp.print.blanket.server.ModPrBrkVOImpl;
import oracle.apps.qp.print.blanket.server.PrlAtrbsVOImpl;
import oracle.apps.qp.print.blanket.server.PrlHdrVOImpl;
import oracle.apps.qp.print.blanket.server.PrlLinesVOImpl;
import oracle.apps.qp.print.blanket.server.PrlPrBrkVOImpl;
import oracle.apps.xdo.XDOException;
import oracle.apps.xdo.oa.schema.server.Template;
import oracle.apps.xdo.oa.schema.server.TemplateHelper;
import oracle.apps.xdo.template.FOProcessor;
import oracle.apps.xdo.template.RTFProcessor;
import oracle.jbo.RowIterator;
import oracle.jbo.RowSet;
import oracle.jbo.XMLInterface;
import oracle.jbo.domain.BaseLobDomain;
import oracle.jbo.domain.BlobDomain;
import oracle.jbo.domain.Number;
import oracle.jbo.server.ApplicationModuleImpl;
import oracle.jbo.server.DBTransaction;
import oracle.jbo.server.ViewLinkImpl;
import oracle.jdbc.OracleTypes;
import oracle.jdbc.driver.OracleCallableStatement;
import oracle.jdbc.driver.OraclePreparedStatement;
import oracle.jdbc.driver.OracleResultSet;
import oracle.jdbc.driver.OracleConnection;
import oracle.xml.parser.v2.XMLNode;
import java.lang.*;
import java.sql.*;
public class KciSoPrintClass implements PrintExtensionObject
KciSoPrintClass()
public ByteArrayOutputStream getPrintExtensionXMLFragment(String s, String s1)
ByteArrayOutputStream bytearrayoutputstream = new ByteArrayOutputStream();
String s2 = null;
String s3 = null;
String s40 ="KciCustomClass";
byte abyte0[] = null;
byte abyte1[] = null;
OAApplicationModuleImpl a1=new OAApplicationModuleImpl();
OADBTransaction dbtransaction = (OADBTransaction)a1.getTransaction();
dbtransaction.writeDiagnostics(s40, "Sujo John"+ s,1);
try
//OAApplicationModuleImpl a1=new OAApplicationModuleImpl();
//OADBTransaction dbtransaction = (OADBTransaction)a1.getTransaction();
Statement stmt = dbtransaction.createStatement(1);
System.out.println("Testline1");
String str = "select attribute7, attribute8 from oe_order_headers_all where header_id = " + s + " and 'O' = " + s1;
System.out.println("Testline2");
ResultSet resultset = stmt.executeQuery(str);
dbtransaction.writeDiagnostics(s40, "nessDoc method"+ s,1);
dbtransaction.writeDiagnostics(s40, "START:Prinoc method"+ s1,1);
//OAApplicationModule am = pageContext.getApplicationModule(webBean);
//OracleConnection conn = (OracleConnection)dbtransaction.getJdbcConnection();
//OracleConnection conn = (OracleConnection)dbtransaction.getLocalJDBCConnection();
//Connection conn = (Connection)am.getOADBTransaction();
//DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
//Connection conn = new oracle.jdbc.driver.OracleDriver().defaultConnection ();
//Class.forName("oracle.jdbc.driver.OracleDriver");
System.out.println("Sujo");
//Connection conn = DriverManager.getConnection("jdbc:oracle:thin:APPS/[email protected]:1533");
//System.out.println("Sujo2");
//String s41 = "select shipping_instructions,attribute8 from OE_ORDER_HEADERS_ALL where header_id = " + s + " and 'O' = " + s1;
//System.out.println("Sujo3");
//Statement statement = conn.createStatement();
//dbtransaction.createStatement();
//ResultSet resultset = statement.executeQuery(s41);
if(resultset.next())
s2 = resultset.getString("attribute7");
s3 = resultset.getString("attribute8");
catch(SQLException sqlexception)
sqlexception.printStackTrace();
catch (Exception e)
System.err.println("Got an exception! ");
System.err.println(e.getMessage());
try
//s2 = "abc";
if(s2 != null)
abyte0 = s2.getBytes("UTF-8");
//s3 = "abc1";
if(s3 != null)
abyte1 = s3.getBytes("UTF-8");
bytearrayoutputstream.write("<attribute7>".getBytes("UTF-8"));
bytearrayoutputstream.write(abyte0);
bytearrayoutputstream.write("</attribute7>".getBytes("UTF-8"));
bytearrayoutputstream.write("<Attribute8>".getBytes("UTF-8"));
bytearrayoutputstream.write(abyte1);
bytearrayoutputstream.write("</Attribute8>".getBytes("UTF-8"));
catch(IOException ioexception)
ioexception.printStackTrace();
// dbtransaction.writeDiagnostics(s40, "START:PrintAM:writeBusinessDoc method"+ abyte0[0]);
// dbtransaction.writeDiagnostics(s40, "START:PrintAM:writeBusinessDoc method"+ abyte1);
return bytearrayoutputstream;
Any help will be appreciated

There is a custom extension class available for this "Print and Priview" report. You can implement that and return the SQL Query in the class so that it gets executed and adds the custom attribute information at the end of XML file and you can modify the layout to add the information. The extended java class can return "select statement" or XML data. If it returns select statement code executes the query and adds the xml data at the end or returned XML data will be added. Look for Profile "OM: Printed Document Extension Class Name"

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

Print preview and print doesn't show the correct out put result when i connnected with EPSON LX-300+II

I hava an html webpage with css & print css. The print preview and print doesn't give correct output there is alignment problem when i connected with EPSONLX-300+II. But iam connected with hp laserjet they show the correct output with firefox. Please fix the problem as soon.....

I have same problem as you, but later I know how to deal with it.
1. change your print default preferences to
print quality into (120x144 dpi, or other which suites you)
mine goes well to 120x144 dpi
2. Before print enter File->Page setup, set true to option shrink to page width
in order to fit your page into your desired paper
(firefox will resize your content to suit the paper you choose).
If you dont want this you can disable this option.
3. Still in Page Setup, if checkbox "Print background (color & images)" is unchecked then
white text will be printed black.
Set this checked if you want to print white text as it is color.
I hope it answers your question.
Steve
http://www.dailymobilegames.com

Preview and print a Crystal report prompted for the sa password

Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
Yuka

Hi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don

Adding New View Objects/Link on "Preview and Print" - Order Acknowledgement

Hi,
Can we add New View Objects/View Links for the existing "Preview and Print" Order Acknowledgement.
I want to add for the 2 new functionalities i.e., for Charges (from OE_PRICE_ADJUSTMENTS_V ) and the Line Level Notes, which is currently not supported by Oracle.
Can anyone help me on acheving this functionality?
Looking forward for your response.
Thanks in advance,
Regards,
Muru

You can do that. You should first create the new business objects(AM, VO, VL) in jdeveloper, create your new regions in jdeveloper, associate the AM to the top level region(stackLayout) you create. Use personalization and add a stack layout in the Preview and Print page, set the extends property to point to the new region which you had created. Donot forget to deploy all the files in middle tier before doing the personalization.
The AM which you had added to the stackLayout will automatically be nested with the root AM of the page during runtime.

Preview and Printing Document Problems

Similar Messages

Maybe you are looking for