Preview and Publish Errors

I just started trying Muse (as a trial). And I can't preview or publish the site I created.
PREVIEW
When trying to preview (both within the app and in the browser) the following error appears:
Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
Screenshot:
BUT:
I added all Adobe apps to exclusions in my antivirus.
I added all Adobe apps to the Trusted category in my firewall (allowed all types of connections).
I tried completely turning off both the antivirus and the firewall.
I restarted Muse, restarted the PC - no result.
All other applications connect to their sites OK.
STRANGE:
If I select 'HELP' menu and press the 'Sign in' option, Muse signs in no problem. So it CAN make a connection over HTTP!!! (As far as I understand it.) So, what's the problem with the preview then?
Windows Seven x64
COMODO Internet Security used as both antivirus and firewall.
Adobe AIR and Application Manager all up to date.
PUBLISH
When I try to publish the following error appears:
An unexpected Adobe Business Catalyst error [0, 0] has occurred. This may be caused by a temporary outage during maintenance. Click OK to view Adobe Business Catalyst system status.
Screenshot:
I clicked the OK button - Catalyst site status is all green.
Can anyone help me out?
Thanks a lot in advance for any useful help!

same here, preview does not works in muse and edge code, just tryed it out default br both.
Code opens my browser chrome, but then gets stack and asks me to reslait in debuging mode, allowing it, does not solve the problem, keeps the same result.
in muse i have the same picture here, publishing and ftp works just fine!

Similar Messages

Preview and Publish Problems

When I only have a few slides in a Captivate file - it will
preview and publish fine. When I have more than a few slides in
Captivate it will only preview and publish the first few seconds of
each slide.
Help!

Welcome to our community, Allison
Can you give us more detail?
* How many slides total are we talking about?
* What are you seeing that is telling you that only a few
seconds are there?
* Do the slides show then disappear? Or do they pause and you
don't see the rest if you click somewhere?
* How did you record? (Demonstration, Simulation, Full
Motion)
Hopefully with more information we might offer suggestions...
Rick

Losing links of images on Preview and Publish.

Some images are not linking on Preview and Publish (Beta7). I have relinked (even going back to the original in Photoshop) and re-published again, those link up but then other images stop linking and do not load. Ones that were working fine just minutes ago.

Hi COLBY,
Here is the link to a recently published site. On the Publish I did about 30 min. before all the images were loading. Now on this page two are not. When I wrote the question yesterday 6-7 images were missing, randomly. One than publish again three, than more. Since yesterday I went back to a earlier saved version and made some minor type changes and links, not involving any of these images. The first time I published today, all the images were linked. It seems the longer I work with the file the more images seem to disappear. I have only had this problem since I updated to the Beta 7, on Friday. http://amberart.businesscatalyst.com/cockroaches.html
Thanks.
Linda Nye

An swf file does not show up in the website even though you can see it in preview and publish

I created a swf file from a mov file in Adobe Encoder. Thge movie shows up in Muse in both the preview and publish mode.
Does not show up in the webstie. The html file is in the assets foder and the swf file is in the image folder and the space is blank.
When i encoded the .mov file I saved it as FLV. Web 1920 x 1080, 16 x 9 5.4 Mbps is the setting for Flash Web Video when i encoded the file.

To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
* Tools > Options > Privacy > History: [X] "Remember download history"

Navigation not previewing and publishing as designed

When preview and publish, the navigation gets spaced out vertically too much.

Hi,
Please provide us the site URL to take a look at.
Regards,
Aish

Captivate 4 previewing and publishing issues

I downloaded and installed Captivate 4 on my computer. I'm a
current user of Captivate 3. I imported one of my projects into
Captivate 4, but when I try to Preview or Publish the project
nothing happens.
When I published the project to HTML, it only created the
"standard.js", "ProjectName.htm" and "ProjectName.swf". I'm
wondering if anyone else has ran into this issue with Captivate 4
and how I can fix it.
BTW, I just checked, and this only happens with the project
that was created using Captivate 3.
Thanks in advance,
Ricardo

_toll wrote:
Had the same problem on coverting from cp3 to 4, getting the "Exception EConvertError in module converter.dll at 0000BBF3".
I had 8 files to convert. 4 worked fine and 4 did not, ie got the error msg above. 1 of those that didnt work did convert after retrying the process several times. As for the others this is what i did:
1. launch the cp3 file in cp4
2. when asked to save as new version do so, as a new name obv
3. cp4 will then ATTEMPT to convert the file and you will soon see the Application Error
4. close cp4 and launch the file you created in step 2
5. now cp4 will launch and coninue the process it ATTEMPTED in step 3, you will again be asked to convert the file. do so again. this time however it should FINISH the process for you.
6. cuss under your breath that cp4 should have done this for you in first place and you have lost hours of work.
7. then cuss again that cp4 doesnt have the drag and drop question type that includes option for images.
8. but then praise cp4 that it does however have the right-click functionality.
hope it works for you :-)
@_toll you are a genius. I've lost 5 hours worth of work trying to resolve the same issue. One more note to add to your instructions is that I found that (step 2) the message asking you to "Save As" pops up behind the Cp4 screen. So if you are stuck in "Reading Project" mode check to see if there is a pop-up message behind.
Uuuuuggggghhhh, Adobe why are you so hard to get along with?!?!

Muse does not Preview and Publish anymore

Hi all,
I have been using the Adobe Muse (trial) for some days now, and all of a sudden I can not preview or publish my website anymore. Upon publishing I get the message:
"Unknown Adobe Business Catalyst error has occurred.
Status: 0, 0."
Muse was working perfectly until now, what do I do? Publishing the site earlier did not seem to be a problem either.
(Windows XP)
Please help me, thanks!
Kind regards,
Rob

Hi,
Please Deactivate Muse from Help menu and relaunch Muse and follow the on screen prompts. Once done try to publish again and let me know if you get any error message.
Regards,
Abhishek Maurya

Crystal Report Preview and Print error

Hi,
I am trying my first Crystal report in SAP; I have created one report using OITE table and run it in Crystal Designer without any problem; Then I added it to SAP / Manager Crystal Report / New Report, but I get the following error message when I click the Preview and Print button every time;
The file does exist and the location is setup correctly; I dont understand why SAP can not find the file; Any comments?
SAP Crystal AddOn
Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
OK

Hi,
When you google on "[Could not load file or assembly CrystalDecisions|http://www.google.com/search?q=CouldnotloadfileorassemblyCrystalDecisions]" you will find quite some hits.
One that might be important for you could be http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/b0fc930f-5fc8-4475-bfe7-ad56616e838d/
That is depending on how the report is made.
Another option might be
http://www.velocityreviews.com/forums/t382557-could-not-load-file-or-assembly-crystaldecisionsweb.html
Best regards,
Peter

Jigsaw puzzle shows up weird in preview and publish. Help!

I'm using a trial version of Captivate 8, and I added a Jigsaw Puzzle interaction, with no funky settings. I didn't resize or even move the interaction either. It's sitting in the middle of my slide.
However, whenever I preview or publish, the many of the pieces of the puzzle are scattered off-screen and I can't even see them, let alone move then in order to complete the puzzle.
Here's a sample of my preview (the puzzle is supposed to have 16 pieces). Doesn't look any better in the "1024" view.
Did anyone else encounter this? Or know how to fix it?

Interesting...you're right! I can finally see all of the pieces.
I wonder if there's a way to get rid of that hint picture though. I unchecked the "hint" box but it's still there.
Thanks!

Preview and Publishing Issues

I have the trial 2008 Xcelsius 5.0.0.99 version and have created a dashboard with 43 objects. Everything was going great until I added 5-row, 2-column price array. Now, when I preview or publish, I get a blank screen with an "Initializing . . ." box and it is frozen. I can click preview again and it instantly goes back to edit mode.
If I delete the price array out, it still will not preview. However, if I create a new, simplier dashboard, it previews fine.
After searching the forum, I have upgraded my Flash Player to 10.0 and upgraded my laptop memory to 2GB - which I needed to do anyway.
Is there a fix for this?
After reading some ov the other postings, I do not think that my dashboard is too complicated. Please confirm.
I would be happy to send my dashboard to you for review if it would help.

Hi TFulton
Looks like your using a relatively old version. Can you patch your install to the latest version SP1, FP3 and try again?
Regards
Charles

IWeb Update and publishing errors

I have just installed the latest iWeb update and now I have a chronic publishing error of which I can not seem to fix? The error message states:
*+An error occurred while publishing file “/Web/Sites/Sites.rss”. Try publishing again later.+*
Any suggestions would be appreciated. I have rebooted; reinstalled the updates; download "all to .Mac" and even "downloaded all to folder"...it is when I try publishing directly or via "all to .Mac" that I receive this frustrating error.

I too am having htis problem. The solution suggested can't be done for me as there is no 'Web' folder on my iDisk. Maybe this is because I set up my account a while ago, before iWeb was introduced. Maybe I need to get in touch with Apple to get them to create a Web folder for me. (I tried myself, but don't have privileges.

Captivate preview and publish text does not match slide. (Magic Shrinking Text)

The text size on the Captivate slide matches the PowerPoint. So far so good.
When I preview (or publish) the SCORM module, the text shows up as a smaller size and moved to the left. I don't understand why it doesn't match the original captivate slide. It seems like it's arbitrarily shrinking some of the text. (Other slides come across just fine.)

Go here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5

"Missing File" and Publishing errors

Okay...I'm having two problems and they are becoming INCREDIBLY frustrating. The first one occurs when opening iWeb (1.1.2). I receive an error that reads as follows:
"The following errors occurred while trying to open this document:
Type: Missing File
Description: unnamed"
It gives me the option to continue, which I do and all seems to work well.
That is until recently. Beginning this October 19th, for no apparent reason, iWeb decided to give me a new error whenever I try to publish: "Publish Error: An unknown error occurred"...nice, "unknown", what do I do with that??
I am a teacher, and I depend on this website to maintain contact with my students and parents. This is so aggravating. I need to publish my sites!
Can anyone out there help??

hi, Jorge
you can try do as follow step
- start transaction rsa1
- select "System>Status"
- remember the Gui status
- double click on the Program Gui
- select in the ABAP editor the icon "Display object list" or push
(CtrlShiftF5).
- open the GUI status structure
- select the GUI status which is displayed in "System>Status" by a
double click
- select from the menu "User interface>Generate"
restart the transaction rsa1

Background is blank when previewed and published

Ok - I am getting really irritated! The background of my
slide is there when editing, but when I preview or publish the
project, the background is white. All the captions and mouse
movements are there but no background! What do I do?

Use count is 1. There is nothing covering the slide. This is
only happening with one slide. I even tried copying and pasting the
background from another slide on to the one that isn't working

Why is slide showing up blank in preview and publish, but not filmstrip view?

Hello,
I was having the problem I described in another post where data that was masked flips back to the unmasked value- however, this time I couldn't figure out any solution.
So, I tried copying the background image, putting it in an image editor, then pasting it back into Captivate and adding my highlight boxes (Captivate 3). It worked in Preview mode for a good hour, then I published and that particular slide showed up with white (no bkgrd. image) but you could still see the highlight box and mouse movement.
I shut down captivate then restart in preview mode and the same thing happened- worked until I published then that particular slide had problems again.
Any ideas? I'd appreciate them much. I feel like I've had every problem in the world with Captivate in the last month!
Dee

Absolutely confused... I did not suspect that my suggestion would lead to such inexpected behaviour.
I'll have to think more about it, which is difficult since I can't reproduce your problem.
Your idea to move the files from within Elements tells us something.
Maybe examining the log file could give some hints about the failures of Elements in the process.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

Preview and Publish Errors

Similar Messages

Maybe you are looking for