Preview can no longer see my Canon MP540 scanner, though it had been working normally up to a few days ago.

I am unable to scan from 'Preview' to my Canon MP540 printer, though scanning does work using the Canon solutions menu. 'Preview' was working normally up to a few days ago and I do not understand why the 'import from scanner' option is no longer available. Any ideas?

Hi,
Most computers with front and back Firewire and indeed USB ports have different controllers for them inside.
A look in the system Preferences should confirm this (Listed as Buses at least)
My USB layout
Often Shutting down the computer with all periferals unplugged (cable wise) and waiting 15 minutes will get the ports and controllers to reset.
It may pay to try this.
Where the App is should not matter in this context. (It does for Updating purposes)
Is this a camera that can play back other media/Devices and convert it in to DV for onward Firewire connection to the computer ?
Sometime they store in one format and can output in another. This allows them to act as DV converters.
This may bear some impact on the settings on the camera.
You said the Computer has 400/800 ports.
Do you mean it has one of each ?
Or do you mean you are using an Adapter and running some devices at 400 and some at 800 ?
It is likely that the camera is neither (System Profiler should tell you)
You seem to be clearly saying nothing has changed from when it worked
I am just exploring ideas.
Is there any chance the Scratch disk is nearly full and is sending lots of data back and forth to see what it can drop/lose?
Has the app that uses it been shut down recently.
Have you increased the number of Undos that it can do ? (This will store more Scratch data)
Have you stored anything else on that disk that is in use or takes up a large portion of the space ?
9:03 PM Sunday; April 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
>

Similar Messages

Mail has stopped deleting on AOL after I delete it on the iphone. Had been working just fine until a few days ago? How can I fix this??

I have had this iphone 4s for about 2 years. I was always able to delete from the phone to aol and vice versa. Now will only delete one way. ...from aol to the phone. How can I get the phone to once again delete the mail on aol?? Thanks

It's in recovery mode. It's tryijng to tell you to plug it into iTunes and restore it.
LuvsMacs2014 wrote:
I am not going to "restore" the phone & get ALL my info, photos & everything deleted!
I hate to tell you this, but ALL your "info, photos & everything" are already gone.
You don't have a choice.

Can anyone help. For security reasons I reset my admin password on my Macbook Pro a few days ago and didn't write it down. Now I've forgotten it. I didnt receive an installation disc when I purchased my Macbook Pro online - it didn't come with one-help

Please see question above, but also note, I have the Applecare Protection Plan but am unable to get through to anyone on a weekend and I desperately need to use my laptop this weekend. I can't log in at all now as I've forgotten my admin password. A few weeks ago I also changed the password on my husband's new MacBook Pro and again forgot the password. I spoke to someone at Apple and they helped me to reset it within minutes, by restarting the computer holding Command+something else (I can't remember what it was). A black screen with writing came up and I had to type in something like "password" (not sure exactly). Anyway, this was a very quick and efficient process but I didn't write it down unfortunately. Does anyone out there know what to do? Thanks in anticipation

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.

Up graded to yosemite, imac no longer see's Canon 7d.

I used iphoto in the week to down load some pics as normal. Upgraded to Yosemite a day or so later. I can no longer see my Canon 7d auto on my imac. The auto update updated iphoto also. Yosemite Version 10.10.1 - iphoto Version 9.6 (910.29). How can i get it back to seeing the camera. Usb port ok, usb lead ok.

HI,
Go to /Library/Preferences. Move all the files in the System Configuration folder to the Trash, restart the iMac.
That doesn't alter your settings, just resets Airport.
Carolyn

I can't upload files created in Microsoft publisher, but I could a few days ago. Why?

I am using the PDF online converter and had no problems with it only a few days ago, but now I get an e-mail sent to me with an error message that says the following:
"While processing your job 491DC3BA-6868-08A14D (C:\Users\Public\Advertising documents (pub and pdf's)\Langley advance Ads 2008\ad for surry paper november 2008 color.pub), the converter encountered the following error situation:
Document processing discontinued : Publisher application failed to open the document and exited
Please try to resubmit your job if indicated in the above message.
We apologize for the inconvenience.
The Create Adobe PDF Online Team"
I use this service quite alot and don't have any other way of converting a file to PDF. I have tried in thepast to download an extension that would allow me to do it without the online converter, but it is'nt supported in Vista.
Help!
Mina Lee Thomas

Hi Mina Lee Thomas
The Online PDF Converter is a busy line, which often has a long waiting que. Error can happen in a busy line.
I suggest you use following Freeware PDF Converters.
1] Cute PDF Writer 2.6 that comes along with ghostscript Converter.
This is fast, requring no adjustments and converts many pages text
files, PPT flles easily without any errors. It is user friendly.
2] PDF Tools.
This has multifunctions.Encrypt, Decrypt, Merge, Split, Reaarange
PDF files, Create PDF, Stamp utilities. This is also very useful
freeware.
Please download these two Freeware from website. you do not have to depend on external sources.
Regards and best wishes
Dinkar
Freelance Service Provider
[email protected]

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

I can no longer see my kobo in the ADE. What do I do?

I can no longer see my kobo in the ADE. What do I do?
I was able to transfer my library books by downloading and then transferring them to my kobo through ADE. Now when I open my ADE my Kobo doesn't show up but the kobo is connected to my computer and I can see it in my control panel.
thanks

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"YBBD" <[email protected]> wrote in message
news:gnhkjh$7ap$[email protected]..
> I'm not sure what I did to make this change, but
previously when I use the
> property values as opposed to html code to make changes,
color,
> formatting,
> etc, it could be immediately viewed without out going
out to the browser.
>
> I would view with browser and maybe make a few changes
here and there to
> html
> to finess, but primarily I could do all in the design
layout.
>
> Now, even when I color text, it doesn't show until I
preview in browser.
> Changes in font size, color, etc, nothing can be seen
until I go to
> preview and
> save.
>
> Can anyone tell me what change I made to cause this?
>
> Thanks for your help in advance. Sharon
>

Can no longer print to Canon printer connected to Airport Extreme

My Canon MP830 is connected to my Airport Extreme. Bonjour on my Windows 7 Acer laptop sees and installs the printer. I have been printing to the MP830 successfully from wired and wireless computers on my network this way for around a year. Today, I can no longer print to the MP830 unless I connect it directly to a USB port on my Acer. Bonjour can still see and install the MP830 when it's connected to the Airport Extreme, but I can't print to the MP830.
Any ideas?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

ITunes + Vista = my computer can no longer see my DVDrw drive...

I just downloaded iTunes 7.6.2.9 onto my Dell Inspiron E1705 - and when I restart my computer, the computer can no longer see my Optical drive (DVDrw). I contacted Dell support, and they changed something in the regedit limits or something(I'm not a techy lol), and my optical drive was back.
But the next day when I opened iTunes I got a message that says:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
So I reinstalled iTunes.
I restarted my computer, and it could no longer see my optical drive AGAIN. My DVDrw drive gets an error that says "This device cannot start (Code 10)." When I check for solutions it says "Could not load driver software."
I go back to Dell support and tell them my optical drive isn't working. They do the exact same thing to fix it (deleting some limit with regedit) and it works. I open iTunes, and I get the iTunes Warning (Setup Assistant Error).
I asked the Dell tech what the deal was, and he said iTunes isn't compatible at all with Vista.
But according to Mac's website it is...
Anyone know what's going on?!?!

I am having the exact same behavior as xhollysue!
It goes like this:
1. Install ITunes, lose optical disk drives hardware (they don't even show up in Windows Explorer).
2. Use RegEdit to disable Upper Filters at HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}, optical drive hardware re-appears.
3. iTunes requires a re-install to permit CD burning, and your back to square one.
I got the above fix NOT from a Dell technician, but, instead, from a Microsoft technician, which cost me $70.
I would strongly urge Apple to research this issue and come up with a more reasonable workaround since (1) the iPhone is being adopted by many traditional MS users and the use of iTunes is an integral part of the iPhone technology architecture; (2) iPhone 3G is just now shipping and will bring even more into the Apple camp; and (3) iTunes is clearly a better media player.
Come on Apple. Let's get some enthusiam and take advantage of this opportunity!

After port forward, airport utility can no longer see my time capsule

I tried to forward public port 1025 to private port 80 on a raspberry pi using airport utility. But after I did that, the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
Thanks,
Michael

It doesn't sound like a port that is used.
From the standard google search.. nope.
Reboot the whole network..
No luck tell me what OS version you are running the utility on and what model and firmware TC???
Note with Yosemite, anything can and will happen.

Can no longer see files on application

Hi,
I have been using creative cloud for a while now and everything has been working fine. Then the other day I went into the creative cloud app on my desktop and could no longer see my files. The person who i am sharing the files with can still see them on his computer but i can only see them when i click "view on web" in the assets section of the creative cloud drop down.
Do you know why this has happened? and how i can resolve it?
Amy

Hi,
this issue could be what your seeing. Please check to see if you have 2 Creative Cloud folders.
ANNOUNCEMENT:"Creative Cloud Files (unknown)” folder created with 1.9.1.474 update
Hide Details
by David Baxter (April 3, 2015)EditAnnouncement "Creative Cloud Files (unknown)” folder created with 1.9.1.474 updateExpireDelete
With the recent update of the Creative Cloud Desktop app (1.9.1.474) we unfortunately introduced a bug which causes the creation of a new Creative Cloud Files folder, and re-sync of all content. This will only occur the first time the sync application runs after the update. This has caused understandable pain and confusion, for which we truly apologise.
We have taken steps to ensure we increase our focus on quality in this area to prevent a recurrence.
Once sync has completed, you will have a “Creative Cloud Files (unknown)” folder. This is because the sync application moves your Creative Cloud Files folder to this location prior to the fresh sync. You should be free to delete this folder if you have no pending edits waiting to be sync’d to the cloud.
If you have any questions or concerns, please contact us at [email protected]
Again, let me say we are sorry for any inconvenience caused

Can No Longer See User Folder in Intrnl Drive after transferring to Ext Drv

I'm trying very hard not to freak out right now, but I can no longer see my User Folder/Home in the Finder Bar after dragging and dropping it into the my newly formatted Seagate External Drive. I have OS 10.4.11 and am trying to install Snow Leopard, but before I do I wanted to back-up my hard drive. So I plugged in the Seagate, formated it for Macs, and then dragged and dropped he User Folder into the Seagate and now it is gone!
Would greatly appreciate advice on how to find the User Folder so I can return it to the Internal Drive AND help on how to properly copy it to the Seagate External Drive as I have been unsuccessful.
Many thanks!

Not really. I previously tried that already. I added Chinese (Taiwan) and moved up pre-existing English as the phone language. Also set navigation voice in Here Drive+ to Chinese. Result:
1. Street names still shows in English (it goes with phone language obviously), like "Da Xing Rd." However, some landmarks will show in both languages.
2. Navigation voice is in Chinese but all the street names are announced in English, so e.g. "Da Xing Rd." is announced as "Da-Sing-R-D". ("St." will be announced as "S-T"...) (This is the same as in WP8)
Thank you.

My safari menu bar is missing --the menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away. Any ideas how to retrieve it?

My safari menu bar is missing. The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away when borrowing my computer. Any ideas how to retrieve it? Thanks.

I too was having the same problem However, I could access both the menu bar and the dock by hovering my mouse over them so it wasn't a huge problem but I prefered having it there anyway. I was not in full screen mode and I could still go into full screen mode if I wanted to. I found the easiest solution was to just quit safai and restart it, but it might not work for you considering you couldn't access you menu bar either way.
I found this article that allows you to hide/show the menu bar and the dock through TextEdit (didn't work for me) http://www.mactricksandtips.com/2009/07/hide-the-menubar-or-dock-in-specific-app s.html It is pretty old so it might not work for lion and a bit risky if you don't know what you're doing so I wouldn't really recommend doing it this way.
And KSheppard, I know it's not really any of my buisness, but the way to get answers to a question isn't by insulting others and being quick-tempered. Even if you feel like you were insulted first, don't try snapping at people who aren't obligated to help you. Honestly, it just makes everything easier if everybody is cooperative and polite.

My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do

My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do?

"bin wide out"?
If you mean you cannot read the code on the back of the card take it back to the store you purchased it from. If the numbers are not visable because you scratched them out I don't know if the store will replace or refund that. If you can read some of the numbers you could just keep trying a combination of letters and numbers to replace the missing ones. This will take a while depending on how many inputs are missing. You will have to use 0 through 9 and I am guessing A through Z.

In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are. This is a very valuable function and it seems to have disappeared. Anyone know where it is?

In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are. This is a very valuable function and it seems to have disappeared. Anyone know where it is?

Go to the View menu and turn on the Status Bar. If you don't see the menus, go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards.

Preview can no longer see my Canon MP540 scanner, though it had been working normally up to a few days ago.

Similar Messages

Maybe you are looking for