Preview Differs From Final Burn

Trying to burn a dvd with chapter selection.
I preview the whole dvd before burning and it looks fine.
Test every chapter, watch the whole dvd etc. No problems. Plays how I'd like it to.
I burn it without any problems or error messages.
But, when I watch it in a regular dvd player.
Menu load and I go to play it and it starts halfway through the video.
I go to the scene selection menu and it starts from the same place.
Every scene goes right back to halfway through the movie.
The dvd won't play in the computer that I burned it on.
And when I preview the file in IDvd post burning the preview is messed up like the dvd.
Anyone else have this problem?

Welcome to the Apple Discussions. Instead of burning from iDVD use the File->Save as Disk Image menu option. That encodes the project and saves as a disk image. You can mount the disk image and play it with DVD Player. If the chapters work OK there then the problem is with the burning process. If the chapters are as they should be burn the disk image to disk with Disk Utility.
Be sure to use quality media, Verbatim-R is the most recommended brand here, and burn at the slowest speed possible.
OT

Similar Messages

Payment term in PO print preview different from PO header

We have set payment term ZI60 for vendor 2033803, but on the PO print preview it's "Payable immediately Due net" .In PO header (In delivery/invoice tab) also, it shows payment term to be ZI60...but on print preview it shows 'Payable immediately Due net' .What could be the reason?

"Payable immediately Due net" may be the description of payment term ZI60
goto to table TVZBT give ur payment term ZI60 and see the description......
i think
in the print program they have designed to display the description of payment term...if u want to display the payment term then ask ur ABAPer to change it...

Offline preview differs from online display of Japanese text

I can't figure out why my web site in English and Japanese cannot correctly display the Japanese type when uploaded. The offline preview is fine, but the online version turns the Japanese to gibberish. I have set the charset="UTF-8" in metatags and in the javascript code.
Thinking that I may have missed a supporting file in the upload, as a test, I downloaded the entire directory and opened the file offline, but it again works fine on my desktop. The same browsers (Safari, Chrome and Firefox) used for online and offline viewing.
Why won't my Japanese text display online when the offline preview is fine ?

Have you set the correct charset on your webpage? If not try to put this within the head tags on your page:
<meta http-equiv="Content-Type" content="text/html; charset=shift_jis">
Hope this works.

Live preview differs from IExplore

Hello all, i created a template in photoshop and opened it in dreamweaver. when i view the live, it seems to display clean and crisp. but when i try it in internet explore its seems a bit pixelated. it is not very obvious but my keen eye can tell me. i have also noticed when i draw a div box and place text in it, the preview is fine in the live preview but the div box shifts about 3 spaces to to the left in IExplore. i have not loaded a css to the file as am not experienced creating css layouts. Is there a way to fix these problems.

Upload your page and dependant files to a remote server space and post a URL, please.
FWIW Browser variation is nothing new. When you're experienced with CSS, you learn to build your sites and test them to perform well in the standards compliant browsers (Firefox, Chrome, Safari). Then use conditional comments or hacks to fix things that don't work in IE.
As for pixelation, it could be you optimized your images poorly in PShop or didn't save them correctly for the web as JPEG or PNG. But there's no way we can help you without seeing your page.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Small book title page previews differently from layout in Aperture

I have laid out a small book and in Aperture I have:
1. The cover
2. A grey left hand page
3. A Title right hand page
4 etc - all the photos.
I've laid out some of these as double-page 1-up spreads. Looks great but the problem is when I preview it the grey left hand page right after the cover disappears, throwing everything out of sequence. This splits up the double-pagers, making the book absurd.
Any idea (a) whether Aperture or Preview correctly shows what the finished book will look like, and (b) how to bring them into line/avoid this happening again??

peter at knowhowpro wrote:
DHWachs wrote:
This post was great! Thank you so much. But I am hoping you know one more thing related to this. In the "transform" section of the definition (where the x/y coordinates are set along with height and width) there is an option called "angle". I was hoping that changing this value would allow me to offset the angle of the picture. However, if I put any value there other than 0 the template becomes unusable.
Do you happen to know what this option does?
I haven't looked into the files, so this is just a guess based on how some graphic applications work. It's common to think of rotating a shape as pivoting around a center point, but It's possible that the file sets a value for the rotation point not at the center. In some graphics applications, you can set a shape's pivot at any corner or in the middle of any side, of the rectangle that contains the whole shape.
So, your value may be rotating the shape around a pivot that moves the shape into some area that upsets the behavior of other shapes. Just a thought.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Peter's point is a good one. I would also assume that the "angle" property allows you to rotate an image, but I haven't tried it myself. One thing to investigate - are there any page templates included in LR that have image placeholders that are at an angle (I don't recall any, off-hand)? If so, looking at the associated .lua file could provide insight into how an angled image placeholder should be described.

Burning a video from Final Cut Pro using iDVD

When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
Piero

I try to burn a dvd directly from final cut but it keeps failing. Do I need a specific program?

I am new to Final Cut pro X. I used to burn dvd's from dvd studio pro however it's not looking like that is a option. Everytime I try to burn it directily from final cut it gives me a "failed" message. Is there a dvd burning prgram I should be using?
Thank you

I've had some issues with burning, too. It could be an issue with the brand of disc you are trying to burn. I was trying to burn DVD+R DL discs from Microboards, but they failed every time. Once I tried the TDK brand, it worked just fine. This could be an issue with any disc format, not just DVD+R DL. Most people seem to have the best luck with Verbatim (which is what I usually use).
I would troubleshoot in this order:
Trash your preferences, empty trash and retry (Digital Rebellion's program is very straightforward for this)
Run Disk Utility and retry
Shut Down for 10-15 minutes to allow the internal components to reset themselves, reboot and retry
Try with different brand of media
Uninstall the program and reinstall a fresh version
Most problems get resolved by step 3 or 4.
Good luck!

How can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor/

how can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor.

Had same problem with iPhoto pictures and poor burn quality. Went back to original picture file and dragged images into idvd project from there. Set encoding at professional quality and burned at slowest speed. Got very good result with high quality slideshow when played on TV.
Also tried Old Toad's Aug 30, 2011 advice to get a slideshow into iDVD with transitions, music, etc. from iPhoto.
Again the quaility of the burned CD was very good.

Dvd burned from final cut pro hackes when viewed on Bose dvdplayer

When I burn a DVD from final cut pro x (disc creator) on my MAC book pro,(MAC IOS lion 10.7.5) it can be viewed on my computer without problems, but hackes when viewede on my Bose dvd player, even though it works fine with purchased dvds. What is the problem?

Brand of DVD media can cause this. Not all DVD players will work with all self-burned DVDs. They are flimsy soft plastic and prone to errors. This is not an FCPX issue, but simply a self-burned DVD issue. Try a different brand of DVD media.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

Problem with picture in burned DVD from Final Cut Express quicktime file

I use Final Cut Express HD to edit. On more than one occasion, I have exported a movie using quicktime conversion and then used iDVD to burn it to a DVD. Every time I do this, the DVD's picture is shaky, especially when there is fast motion. I have tried burning with both the best performance and best quality settings in iDVD and it doesn't make a difference. The same problem occured when I tried to use a friend's computer to do the same thing. We both have the new 20" iMacs. I am not sure if it is Final Cut or iDVD that is the problem, but quicktime files that are not from Final Cut Express are not a problem. I have a feeling it is a setting somewhere that needs to be changed. Thanks!

Greetings.
I've personally never used iDVD for any sort of DVD authoring, but the symptoms that you're describing are giving me the impression that there may be an issue with the MPEG 2 encode. Again, I don't know iDVD so you might be better off asking this question in the iDVD forum.

Image previews different in Aperture from other applications

I've just come across a problem with Aperture after importing a TIF image (usually I stick with RAW). The preview in AP3 looks different from that in all other photo applications I have. I looked at the same image in Preview, Lightroom 2 and iPhoto. In all 3 cases the on-screen preview was the same.
When viewed in AP3 the image is noticeably different - Onscreen Proofing is off.
To show what i'm seeing I've uploaded a screen capture of the image open in Preview and Aperture:
http://www.mark-connell.com/Photography/Testing/screen-capture/880283357_DkDaM-X 3.jpg
Is this a known issue with AP3.0.3 because it kind of makes it unusable as an image editor.
Mark

Add Lightroom 3beta2, Photoshop CS4, Bridge CS4 and LightZone to the list of applications that all display this image the same.
Am I really the only person seeing this?
Mark

Burn dvd from Final cut

I have upgraded to Quicktime Pro, and cannot export from Final Cut to QuickTime to burn a DVD on My G5, what am I missing

Make sure you have registered your copy of QT Pro.
Open QT then -
Quicktime Player > Quicktime Preferences > Register
Input your relevan SN and details.
Also it might be worth giving your computer a restart if you haven't done so since upgrading to QT Pro.
One thing I dont understand is that you should of automatically got QT Pro when you installed FCP.
Once you have restarted - open your project in final cut and go -
File > Export > Using Compressor
(Again Compressor should have come with FCP Studio - What version of FCP are you on ??)
Then in the "Settings" column select one of the DVD codecs relevant for your project that should appear near the top of the menu. Choose a destination and click submit. make sure you have selected your audio to be encoded as a dolby file aswell.
Import the resulting mpegs into DVD Studio Pro and construct a DVD.
All the Best
JB

Colours in result vastly different from preview

I've just installed the latest Photoshop CC. Whenever I go to Image → Adjustments → Anything, the result turns out to be completely different from what I see in the preview. For example, when I use Hue to colourize a picture:
If I do the same using the corresponding adjustments layer, I get the same result as in the preview on the screen, but as soon as I save the picture to a non-psd format, the colours are off again.
It is impossible to work like that. Do you have any idea why this happens? I should note that I work in the standard RGB mode, and the "Proof Colors" option is disabled (but if I enable it, the results are the same).

Well, I construed "preview" to stand for Apple's Preview Application. Not my bad this time, but yours.
Next time, please provide a lot more details when you post:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Preview Differs From Final Burn

Similar Messages

Maybe you are looking for