Preview Disabled doing my head in

I've read a lot of different stuff about the 'preview disabled' problem but can't find a satisfactory awnser.
I'm using a MacBook with FCE 3.5.1 and Quicktime pro 7.1.5. I'm capturing direct to the harddrive from the firewire port from a PAL sony FX1. The tapes are NTSC but this camera DOES playback NTSC, indeed a few days ago I was capturing perfectly with this setup, in easy setup it was DV NTSC anamorphic.
I was capturing all day, then today I try and in the capture window it says 'Preview Disabled'. The timecode still comes up and I can control the VCR from the keyboard, the capture window says VTR OK.
I have not changed anything from the other day, this is the first time i've opened FCE since so nothings changed but now I can't capture anything eventhough the other day it was working perfectly.
Everthings set to NTSC HOWEVER, when I put a PAL tape in the camera I can capture stuff????? I've tried NTSC basic and all that.
Would deleting the FCE pref help like I saw on a previous post for FCE 2? and if so how would I do it in FCE 3.5.1?
Please Help???????

Interesting.
That remedy suggests to me that your camera has auto sensing input/output terminals.
A lot of gear has that type to make things easier for the user, so called connect and forget method. Ironically as in your case it's sort of made things harder because a signal needs to be present to actually switch it on.
At least now we all know about it. Thanks for posting.
Al

Similar Messages

  • FCEHD- preview disabled, can't see any vid in Capture Now

    Thanks in advance......
    I am running G5 Quad and FCEHD. Installed correctly. Trying to hook my DV camcorder to capture vid. Camcorder has DV out (no straight firewire). From camcorder DV out, I go into ADS Tech A/V Link (recognized in Mac) to it's DV in. From A/V Link, I come firewire out into G5.
    BUT.. when I start a project, I have tried every NTSC setting. Everything starts as it should ( I assume). I click on Capture to open capture window and it shows the colored bars and says "preview disabled". HUH??!?! Why is preview disabled? Am I supposed to be running a camera that has a firewire output on it, thus negating the need for this A/V Link??
    I can click the spacebar and the camcorder playback starts to work, so there is some sort of sync there. Press again to stop and it stops properly. But I am not seeing any video. When I press the spacebar again, camcorder playback runs as it should. I then hit the Now button on the Capture window and a page comes up saying "waiting for sync". The it prompts that there is no video. HUH??!!! What am I missing or doing wrong??
    Any help would be greatly appreciated. This looks like an awesome program but I can't tell if I CAN'T USE IT!!

    It is a smaller output than the firwire, although it may technically be the same thing, they look completely different type plug looks-wise. So as i understand it, we are saying almost the same thing. Yep, you're right. MiniDV is the tape, sorry about that. But the connection coming out of my camcorder DOES NOT look like the firewire that plugs into theMac. Also, I have the input device which switches between analog and digital. It has : s-VHS in, composite (yellow RCA) in w/ l&r audio in, and the DV in- a small plug that does not look like the standard firewire, although it could be used for that. The back has s-VHS out, FIREWIRE Out, DV out, composite out. So I am familiar with the ins and outs and I have done this with other setups, very similar.
    I have this input device under the assumption that I may not only be inputing my video but video from other sources as well and from other people as well.
    Thanks for the input. And please forgive my ignorance.

  • "PREVIEW DISABLED" APPEARS WHEN CAPTURING IN DVCAM PAL ANAMORPHIC

    I'm trying to capture from a dv cam tape, pal anamorphic. the setting "DV PAL Anamorphic" results in a Preview Disabled window.
    I am using a re-installed Quicktime, but that doesn't seem to be the problem because regular dv tapes are captured with no "Preview Disabled" window.
    I am using a Sony DSR-11 to capture. It accepts large formate dvcam tapes, which is the tape in question.
    Is there something else that I should be doing?
    Can I capture even though the "preview disabled" window shows?

    Yes, I've been capturing using the setting DV PAL Anamorphic for small format dvcam tapes, and it has worked fine. I have tested this before and after the large format DVCAM tape that was giving me the problem. (It was shot using a Sony dsr-500.)
    So, yes, the settings are correct. I am working with QT 7 on OSX 10.3.9, becasue it works fine with capturing the small format dvcam (PAL Anamorphic).

  • DV PAL shows Preview Disabled on Capture

    I'm trying to get a PAL DV tape to capture in FCP. I keep getting the "Preview Disabled" message in the capture window. When I put in an NTSC tape it plays fine. I've changed all my capture settings to PAL including my firewire settings. I'm using a Sony HVR-M15U. I tried capturing in Imovie and was unable. The only place so far I've been able to capture in is Sorenson Squeeze, but the quality's not great from what I can tell. Anybody have a clue?
    Thank you,
    Alex

    The deck does these things automatically, but then I went and set it to 50i and everything changed. Now it works. I guess this is what you told me to do basically.
    Thanks,
    Alex

  • Fcp5 preview disabled message

    I tried restarting my computer many times but fcp5 keeps saying preview disabled in the capture window. I can control my camera but cant see the video. I have latest osx g4 mirror door 23 cinema display and ati radeon 9800 card. Does anyone know the remedy for his. I even tried re installing fcp.

    mr lamaha
    Which camera/recorder r u using try to change the
    setting in that...
    or
    Or the setting wil be wrong choose the correct setting

  • FCP preview disabled

    I'm trying to capture video and the capture window say's "preview disabled" how do I enable it so I can preview the video I want to capture?

    The other thing going on sometimes is that the user is looping the FW from a camera or deck through a drive's FW port... that works on some drives, but not all drives. I've had no problem doing it with Weibetech drives and also had no problem with G-Tech drives. But just try it with a LaCie and you're in for pain usually... Sometimes just having the low end FW drives connected to the same bus (not looping, but using two inputs on the Mac will make for pain too... better FW drives matter I think. G-Tech, Weibetech, OWC, and CalDigit setups seem to not hog all the bandwidth or whatever and allow for both a drive and a camera/deck to be used at the same time... the REAL fix is to add another FW bus to the Mac via a card or an expresscard in a PB... SATA rules anyway. I'll not buy FW drives anymore. They don't cost much less that SATA externals, and the SATA's are a TON faster.
    Jerry
    Message was edited by: Jerry Hofmann

  • Capture "Preview Disabled" and unable to "Capture Now"

    Okay so I don't think I'm the only one but figgured I'd post just to see what the status is.
    Today I went to capture some plain ol' DV footage from my Panasonic PV-GS500 minidv camcorder and was unable to... sorta.
    If I try to capture I get the message "preview disabled" and at the top it shows (AV)(Unknown).
    If I try to capture now i get the message "Attempt to capture video without a video device selected. Please select a video device in your capture presets and try again".
    I'm using that NTSC Anamorphic easy setup and had no troubles in the past. I beleive that it might have something to do with QT 7.3 as others have suggested.
    What makes it so strange is that if I log clips (monitoring on the cameras LCD itself) and then batch capture it appears to work fine. I can also send video to the Camera.
    Finally to top it all off it captures just fine using iMovie - but this is hardly a solution by any means.
    So anyone know what the deal is?

    You might rey first simply resetting everything to make sure nothing is interfering with the deck control. Power cycle the camera as well. Perhaps if iMovie had been communicating with the camera, FCP may not be able to work correctly with it until it was reset.
    I have read of several instance of similar problems having to do with recent upgrades, however. Hope you are not one of the unlucky ones having issues with QT , FCP, OS versions etc.

  • Preview disabled in log and capture

    I am using Final Cut Pro 7 on the latest iMac i7.
    I have a DVCam deck connected to the iMac via a firwire 800 cable.
    There is a DV tape with DV footage in the deck.
    I am able to control the deck from log and capture but the display is the colour bar window with PREVIEW DISABLED on it.
    I have checked and double checked that my settings are correct, that video and audio are selected in capture settings etc etc.
    Everything is selected correctly on the deck.
    All mu suer preferences and presets are also correct.
    I have trashed FCP preferences as well.
    The content on the tape is viewable fine on the camera and on an external monitor.
    So, in summary:
    I am unable to log and capture DV material from the tape even though the deck is controllable from log and capture window.

    It's a Sony DVCam DSR 11 deck which will play mini DV or DvCam tapes recorded in PAL or NTSC.
    I haven't changed anything on the deck at all since last usung it a few weeks ago with the G5 and Tiger OS. I simply unplugged the firewire and plugged it straight into the new iMac.
    The old G5 was running FCP6, but because the G5 and Tiger (it's was a pre Intel machine) won't run FCP7 I decided to use this as the reason to upgrade and chage to the iMac i7 Lion OS.
    The material in question is PAL DV on mini tapes.
    The camera is a Panasonic DVX100A and only capapble of recording in SD DV.
    All the selection switches are correct on the deck. I'm puzzled why I can get the image and capture from the camera, with the same cable, and yet not from the deck.
    Thanks Michael

  • "Preview Disabled" how to resolve!!??

    I have a Sony GV-D300 connected to my G5, and a video(PAL) monitor connected to that. When I capture from tape I control the deck from FCP log and capture window.
    Sometimes I get no image on the capture monitor and no control from capture window. Instead I get a "preview Disabled" message.
    I've tried "refreshAV devices and View-all frames" but still no image in the capture window. Is there a setting in pref's/
    I've heard "mirror desktop " mentioned but can't find it anywhere
    regards alan (in uk)
    G5 1.25DP;   Mac OS X (10.4.7)   2GiG RAM; FCP Studio5.1

    Some cameras/decks don't do well with FCP unless they were turned on before the computer boots. This has to do with how they respond to firewire bus polling.
    Make sure the deck is plugged in and on before you boot the computer (NO hot swapping - firewire ports can get fried.)
    The system should find the deck without problem which gives FCP plenty of time to connect with the deck during its startup processes.
    If this doesn't help, sometimes a QT reinstall solves some lingering capture control issues.
    Do a search here for 'Quicktime delete receipts and reinstall'. It is mentioned often enough to come up readily during a search.
    good luck.
    x

  • Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?

    I'm getting the following message on screen when attempting to capture video  "audio only capture selected, video preview disabled."  How can I get the view preview back?

    FCE doesn't allow for audio only capture, it's in a twist somewhere.
    Try trashing the FCE preferences.
    Al

  • FCE 3.5.1 & Preview Disabled

    First let me provide my system specs to get those out of the way.
    MacBook Pro 2.4GHz Core2
    4GB RAM
    Mac OS X 10.5.2 (All updates except Leopard Graphics Update: Made my fans run all the time!)
    Quicktime 7.4.5
    Final Cut Express 3.5.1
    Canon GL2
    Settings in FCE are:
    Video out is set to Apple FireWire NTSC
    Cache has been set to local /Users/user/Documents/FCE Documents/
    Issue: When trying to capture video from the Canon GL2 I get "Preview Disabled" in the capture console. I get VTR OK message and I can control the camera but when I click on Capture Now I get "This operation could not be completed as there is no video" error message.
    Based on posts on this and other forums I have tried:
    1. Deleting FCE prefs
    2. Removed all QT Receipts and attempt re-installing QT
    Weird thing is that iMovie 08 works fine with the camera. So any thoughts or suggestions on how to resolve this?

    Never mind the video out, what about the video in. What capture preset are you using? Any other devices connected to the computer at all?

  • After installingwindow 8.1 preview, itune does not recognize iphone

    After IO update and and installing window 8.1 preview, Itune does not recognize iphone.
    I went to devise manager and it tells me everything is working properly, but can not read the iphone on itune.
    Please help with this problem
    Thanks
    TOM

    You shouldn't be running the "preview" anymore. Microsoft released the full 8.1 update last Friday (10/18).
    The "preview" is a beta and should NOT be relied on for any further use. Microsoft explained this in their "preview" downloads.
    http://windows.microsoft.com/en-us/windows-8/update-from-preview

  • HT1766 I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for  set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

    I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for  set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

    Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.

  • Preview Disabled after crossgrade

    Hello. Well, I finally plunged into the deep end and installed 5.1 on my system with a clean install after staring at the crossgrade disks for weeks. I installed the Blackmagic drivers, fcp rescue etc. Unfortunately, when I now try to capture, I get the horrible little preview disabled message. I have searched the forum for fixes, but all the posts seem to be about capturing from camcorders or decks via firewire. We have a Panasonic AJ-D950 RS-422 deck so a lot of the trouble shooting can't be done. I have trashed preferences, reinstalled QuickTime, reinstalled new Blackmagic drivers and set up new easy set ups, unfortunately it still doesn't seem to work. I can control the deck but just can't preview. If anyone has advise, it would be greatly appreciated.

    Could you help? It seems we had/have the same problem. How did you fix it?
    Thanks for your time
    G5   Mac OS X (10.4.8)   Dual 2 GHz 4 GB Ram

  • Firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    Hello, Please make sure to get a fresh copy of Firefox from
    http://www.mozilla.org/en-US/firefox/all
    Have a nice day

Maybe you are looking for