Preview disappeared after disabling some output tracks

I have generated preview for the entire project. In order to grab some still shots, I disabled some output tracks. After grabbing the still shots, I exited the program.
When I launch the program again, my preview has disappeared!
I found that the preview files are still at the same file location in my computer, so they are still "there" but it's not showing in Premier.
Is there a correct way to get them back without having to regenerate the entire preview?
I don't want to just do something becasue at the moment, I know the files are still there, it's just how to get them to show in Premier again.
Thanks for any help.

Try enabling the output tracks that you disabled and see if it comes back.
Regards
Dave.

Similar Messages

E1000 Router Wireless signal will disappear after some time

Hi,
I have set up the E1000 this week, i found that the wireless signal would disappear after some time if the wireless connection is not in use.
For example, on my iphone
1. I search for the wireless signal and successfully got the IP
2. after using for some time, i put the iphone aside
3. when i want to use the wireless again, the iphone is not yet connected to the wireless
4. i would then need to search for the wireless signal and connect again.
This causes problems because i am using some VPN connection at my laptop and it would disconnect it.
Is there any config that would keep the wireless signal ?
Thanks!

Try changing the wireless channel on the router.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
See if that helps you.

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

Running MacOS 10.9.4 16 Gb RAM Lightroom v5.2

Does GPU acceleration in Illustrator CC still work after disabling 'GPU Preview' and enabling 'CPU Preview' (on a workstation gpu)?

I'm using a workstation graphics card that allows for GPU acceleration in Illustrator CC.
Selecting 'GPU Preview' instead of 'CPU Preview' under the 'View' toolbar in Illustrator CC results in a more choppy experience.
Which leads me to wonder:
Does GPU acceleration in Illustrator CC still work after disabling 'GPU Preview' and enabling 'CPU Preview' (on a workstation gpu)?
Does GPU acceleration for my gpu actually improve the performance for my work?

If you disable the GPU acceleration in preferences then you'll be unable to enable GPU preview under the view menu. It will automatically go into CPU preview as the GPU is no longer enabled.
If you're experiencing choppy performance when you do have the GPU preview selected, something is amiss because any GPU that can support GPU acceleration should be able to do it without a performance hit.
What is the video card that's in the workstation?

Why do my images disappear after I animate them and choose the playback button to preview the animations

Why do my images disappear after I animate them and choose the playback button to preview the animations

Sorry, but the information you provide isn't even close to the amount we need to help us help you:
FAQ: What information should I provide when asking a question on this forum?

IPhone & iWork sharing problem after disable preview

After disable all the preview generation in Aperture 2, There is no photo sync into iPhone.
And the iWork cannot use the photo in Library of Aperture.
Can I using the original photo for iPhone sync & iWork sharing instead of preview photo.
Thanks a lot.

Well, now I feel like a real dope. I restarted iTunes (can't believe I didn't do that before) and now the TV's see the share, and the iPhone see it too (I assume the iPad sees it but I have not checked yet).

I want to ask that if some one restore iphone and the icloud is activited before it was last so the can activate the iphone and after restore can we track it

i want to ask that if some one restore iphone and the icloud is activited before it was last so the can activate the iphone and after restore can we track it

No.
If the iPhone is running iOS 7, activation lock included with iOS 7 will prevent someone from restoring the iPhone or completing the process.
If the iPhone can be restored, it cannot be restored from the iPhone's backup - only as a new iPhone or not from the backup.

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

Some album covers disappear after reinstalling windows

Before reinstalling windows i back up my music folder (iTunes), reinstall windows, itunes, add the music again and after that some covers doesn't appear. This shouldn't be, even if i rerip my original cd theres no cover this time.
Example: Morrissey - kill uncle, remastered 2013, David Bowie - Aladdin Sane (40th anniversary).
And yes, i have used the obtain cover feature on itunes many times.

Fixed with itunes 11.1.3

How can I disable the output of the domain name after a getent request?

I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
123.123.123.123 hostname.domainname
How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
Help, please?!

The enrty in Ur DS for name to ip resolution might
have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

(SOLVED) Taskbar thumbnail preview disappears quickly

I have windows 7 RC on my laptop, Dell 1501.
When I start one or more programs from the taskbar and hover my mouse pointer on them I can see thumbnail previews.
The problem is that thumbnail previews disappear too quickly even though my mouse pointer is still on the opened program in taskbar.
I have to move my mouse so I can get another quick preview.
I notice that if I click on an empty space on the taskbar with the left mouse button, and then point to an opened program the thumbnail preview stays for as long as my mouse pointer is on the program.
Does anybody have that problem?
EDIT:
I notice something else,
if I open regedit or computer management and one of them is active, all other opened programs on the taskbar have long thumbnail preview.
But if for example windows explorer is the active window on taskbar, thumbnail previews stay for a short time.
SOLUTION: dell 1501 specific and may be bios version
1. shut down the laptop
2. remove the power supply and the battery
3. press and hold the power button (I pressed it 2-3 times and kept it pressed for about 1 second) --- obviously the laptop will not start.
4. plug in the battery and the power supply, start the laptop and check if the problem is gone.

teeqeela: "I can't believe it! Same dell, same problem, same solution. Thanks man!"
If that was for me, my pleasure.
Noel Carboni: "I'd be curious to know whether you've found the reason it was happening"
I'm curious about the reason, but not prepared to spend the time to find it; I don't think we'd learn enough from it to justify the time. Back pre-Windows pre-Internet I spent weeks painfully debugging. It's
hugely more complicated now, the Internet finds most things quickly anyway, and the tedious tracing doesn't bring many useful insights. I can't give answers, I'll just repeat the facts - any proposed answer must address them. Some details in the numbered points
I made a few messages back. The problem first manifested (for me, and I believe for others) some months after installing Win7 on Inspiron 1501 (specifically that machine). It's cleared by removing all power, and by a couple of software tricks (disable gadgets,
registry hack). Once cleared by power removal, it stays clear for weeks (not months) then recurs (don't yet know how permanent other fixes will turn out to be). One thinks of things such as some bit in system memory that gets set somehow, and never reset until
power is removed (it might be a memory location always alive and watching for a wake-on-lan or other wakeup event), which Win8 expects to find reset. But why the month's delay? Win7 (32- and 64-bit) works fine on Inspiron 1501, but is not officially supported,
and some non-Dell drivers must be used; they work fine. I could go on till the cows come home, but I've got myself a usable machine, and told others about it, so that's it.
HTH,
pol098

NoScript add-on disappeared after a restart of browser.

Last time I restarted my Firefox I noticed something untypical and strange. The last automatic update of the browser to version 34.0.5 was 9. DEC. From that time (after the update) I probably didn't restart Firefox or maybe I did it only once because I can remember a hint about tracking which I saw for the first time.
Anyway, recently I had to close the browser (done correctly) and when in few hours I launched it again (no reboot of PC in the meantime) I noticed that there is no the NoScript's button. Moreover it seemed like there is actually no NoScript installed - I checked add-on's list, about:support page and extensions directory - there was even no xpi file of the add-on inside.
I checked my backup of files from the day before and the file of NoScript was situated in the extensions directory. Moreover I have a screenshot got the same day in which the button is seen yet.
I copied the backed up xpi file into extensions directory and after the next restart Firefox asked me about installation of add-on from file which was found so I've got my NoScript back, but in fact when I launched Firefox the first or second time after update the NoScript disappeared.
How can it be possible? What would happened? Are there any similar cases reported and known or is this a kind of explainable bug?
I mark that I've got always a lot of tabs opened, but there was no such a problems before. And surely I'm aware that Firefox can check the add-ons and disable some of them during update process but in my case the add-on was completely removed without any warnings. The rest of few (most popular) add-ons I've got survived ;).
Firefox version is 34.0.5. NoScript version is 2.6.9.6. The system is Windows Vista.

These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

.AI Icons disappeared after update to 10.6.6

Hi,
My .AI preview Icons disappeared after update to 10.6.6, they do show in Quicklook, but not in the folders. They are now just show the standard AI icons.
My other Imac's dont have this problem.
Thanks
Sarah

Here comes the/my solution:
Remove Sophos Antivirus
Thanks to boojum's remarks in https://discussions.apple.com/message/15480849#15480849 !
Don't forget to use Sophos' deinstall package: /Macintosh HD/Library/Sophos Anti-Virus/Remove Sophos Anti-Virus.pkg
Nevertheless, some settings have been re-initialized (no complete list!):
- Dock
- Language has been reset to English only
- Expose & Spaces
(- probably all personal settings?)

The burn cds software has disappeared after loading 10.5, the burn cds software has disappeared after loading 10.5, itunes 10.5 wont let me burn cds

the burn cds software has disappeared after loading 10.5, itunes 10.5 wont let me burn cds

Thanks for trying Toonz, but unfortunately no success yet. I updated my driver but still get an error message. The interesting thing is I have windows XP (not Windows 2000), so I unchecked a box someone else suggested that I try to check. Here are my latest diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5100
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.14.0), CDR4_XP (5.3.5.10),
UpperFilters: pwd_2k (5.3.5.10), cdralw2k (5.3.5.10), GEARAspiWDM (2.0.4.3),
Video Driver: MOBILITY RADEON 7500\MOBILITY RADEON 7500
IDE\DiskHITACHIDK23FB-60______________________00M0A0C1, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STRW/DVD_GCC-4240N_______________E112___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST RW/DVD GCC-4240N, Rev E112
Audio CD in drive.
Found 12 songs on CD, playing time 39:19 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:21:55
Track 3, start time 05:56:13
Track 4, start time 08:56:00
Track 5, start time 12:45:03
Track 6, start time 15:34:68
Track 7, start time 19:08:23
Track 8, start time 23:21:45
Track 9, start time 26:37:65
Track 10, start time 30:19:48
Track 11, start time 33:32:70
Track 12, start time 36:52:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 24.
The drive CDRW speeds are: 4 10 16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4240N on CDR media at speed 4X.
Any other ideas?

Preview disappeared after disabling some output tracks

Similar Messages

Maybe you are looking for