Preview Display doesn't show - why?

It must be something simple - but I can't get it - why the Preview Display is black?
Scopes show color data all right but no Preview (
Still Store is the same - scopes juxtapose, Preview stays black.
Why is this so?

Solved it.
I was using the hardware accelerated graphics card, the NVIDIA GeForce 9400M, on my MacBook Pro. When I switched to the integrated "better battery life" card in System Preferences and logged out/in again the display came back.
Pretty dumb that Color doesn't run on the hardware card, but there you have it.

Similar Messages

Follow on document display doesn't show any PO no. for Service SC

Hi,
We are using SRM 4.0 with extended classic scenario & currently on support pack 7.
Follow On document display in SC doesn't show PO no.
This Problem seems to be happening only for "Request external staff SC" & "Order SC" functionality ( BBPSC03) while ordering services. Link between SC & follow on document (PO) goes missing even though PO is properly created in SRM system ( being a Extended classic scenario) & also PO copy is available in R/3.
Service SC looks okay if we order it through "internal goods/Service", Describe requirement or through catalogue application.
any help is appreciated & rewarded with full points.
Regards
Bharat

I was a little bit impatient.
Juste need to wait that some people actualy use the transaction so that the system can record the datas. :-s

Acrobat Preview mode doesn't show PMS spot colors

Out of the blue, the preview mode in Acrobat 9 is showing PMS spot colors as black, CMYK colors show up fine. The actual pdf itself is fine. This happens when I make pdfs "High Quality" or "Press Quality" from Indesign 6. Curiously, it does not happen when I make a "Smallest File". However when I attach these pdfs to email, the spot colors appear black.
I've been using 9 for a long time and I've been using Indesign 6 for a few months now. I'm on a Mac Pro, OSX 10.6.8. I can't figure out if there is something that was unchecked or checked that is causing this problem to come up seemingly out of nowhere.
Any advice is much appreciated,
Thanks!

It was correct for Adobe to use the Lab alternate color space for display of Pantone spot colors. Why? Two reasons:
(1)     InDesign and Illustrator are now consistent with Photoshop's behaviour with non-process color channels. This interoperability issue has been complained about for years.
(2)     When one referred to the CMYK alternate color space values of Pantone colors, the question naturally comes up as to which CMYK color space those deviceCMYK values represent. Are those values for SWOP or Gracol or what? According to what Pantone told me personally years ago, they were SWOP, but not so-labelled. Thus, unless your output CMYK color space is SWOP, use of those CMYK colors is simply wrong!!! Using Lab alternate colors will allow whatever renders those spot colors in either RGB or CMYK to properly render them in the actual final color space!
Unfortunately, there is nothing that Adobe can do to cause Apple's preview product to properly display these colors. By the way, this problem also afflicts the built-in PDF viewer in the iOS products as well as MacOS X. Fortunately, under MacOS, you can easily download and install the free Adobe Reader and have it do all the PDF display in lieu of Apple's preview. Although we do have Adobe Reader available for iOS, Apple does not let us replace preview in iOS for PDF preview. You must view in preview and send the file to Adobe Reader.
Of course, if enough Apple users complained to Apple management about the numerous anomalies of its preview program, maybe after all these years, they might actually fix it to properly handle Lab colors (as well as transparency).
          - Dov

HT1146 Can't see the body of my emails, it show the email name and the two line preview , but doesn't show any of the MSG on the right side of the screen. Using ipad2

Can't see any email messages, the email and 2 line preview show, but no message or attachments, why?

Try closing the Mail app completely and see if the emails show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

When playing a song on ipod touch 4th gen, the display doesn't show the time lenghth of song or the shuffle, repeat options. Any thoughts??

When I used to play music, the song display showed the album art, the length of the song and how much time was left, it also had a repeat and shuffle option at the bottom of the screen A couple of days ago, these things disappeared. Any thoughts??

when the song is playing/on the music player tap the album cover or the middle of the screen and these things should pop up for you. If that doesn't work then i dont know.

Preview Application doesn't show corrected coordinates on Exif information

I use iPhone and geotagged photos for Waymarking but since I've installed Lion OSX the preview aplications shows coordinates like this:
N 39º00.000
W009.00.000
Can you help me?
Thanks in advance.

THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
Try clicking on the arrow.

My display doesn't show up anymore for my MacBook Pro

well, here's the issue.... my screen has completely stopped working, everything works (it powers on), but screen won't. it's a MacBook Pro

Hello Brandon,
Thank you for using Apple Support Communities.
For more information, take a look at:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
No video or no signal, image distortion, "snow," or flickering
Have a nice day,
Mario

How do you add an image to the preview that doesn't show up in the live site?

Is it possible to add an image that would take the place of " <> " ?

No this is how it's done. This answer was provided by Nthsecret
1) I create an image of my widget preview (ex. with photoshop);
2) I add an image in a server or ftp;
3) I add the image into file .mucow in this mode:
      <pageItemPosterHTML>
            <![CDATA[
                 <div><img src="YOUR_IMAGE" style=" height: HEIGHT_IN_PX; width: WIDTH_IN_PX;"></div>
            ]]>
      </pageItemPosterHTML>
     <pageItemHTML>
            <![CDATA[
                <div></div>
            ]]>
      </pageItemHTML>

Custom-portlet-mode doesn't show

All,
I created a sample JSR 286 portlet and selected to show about mode (keeping view and edit) default. wizard creates a default about.jsp. However when i added another tag for preview, link to pick preview mode doesn't show in the top right corner (view actions menu) of portlet. Any idea what i am doing wrong.
Thanks,
Prasad
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>edit</portlet-mode>
<portlet-mode>about</portlet-mode> <-- works....
<portlet-mode>preview</portlet-mode> <-- doesn't work
</supports>
<custom-portlet-mode>
<portlet-mode>about</portlet-mode>
</custom-portlet-mode>
<custom-portlet-mode>
<portlet-mode>preview</portlet-mode>
</custom-portlet-mode>
Edited by: Prasad on Dec 7, 2012 8:58 AM

After i de and register again the portlet producer it showed up.
However the content of this is being displayed in a completely different page. Do you know how i can keep the response within the same portlet.
thanks,
Prasad.

[Solved] Gnome 3.8 - doesn't show end session dialog shutdown.

Hi, After my last update, when i try to shutdown by gnome menu, the 'end session dialog' display doesn't shows, and gnome-shell restarts. The same with command 'gnome-session-quit --power-off'. If i try the second time, gnome crash and all extensions are disabled. After that, if i try another time, the system go in shutdown without show me end session dialog.
The packages upgraded are:
lib32-sqlite-3.8.0.1-1-x86_64.pkg.tar.xz
lib32-fontconfig-2.10.95-1-x86_64.pkg.tar.xz
libpng12-1.2.50-3-x86_64.pkg.tar.xz
gucharmap-3.8.2-2-x86_64.pkg.tar.xz
grilo-plugins-0.2.9-1-x86_64.pkg.tar.xz
grilo-0.2.6-1-x86_64.pkg.tar.xz
gnome-shell-extensions-3.8.3.1-2-any.pkg.tar.xz
lib32-glibc-2.18-3-x86_64.pkg.tar.xz
lib32-cairo-1.12.16-1-x86_64.pkg.tar.xz
lib32-mesa-9.2.0-1-x86_64.pkg.tar.xz
lib32-llvm-libs-3.3-1-x86_64.pkg.tar.xz
lib32-elfutils-0.155-2-x86_64.pkg.tar.xz
polkit-gnome-0.105-2-x86_64.pkg.tar.xz
openshadinglanguage-1.3.3-4-x86_64.pkg.tar.xz
openimageio-1.2.1-1-x86_64.pkg.tar.xz
mlt-0.9.0-4-x86_64.pkg.tar.xz
calibre-1.1.0-1-x86_64.pkg.tar.xz
svga-dri-9.2.0-1-x86_64.pkg.tar.xz
sqlite-3.8.0.1-1-x86_64.pkg.tar.xz
poppler-glib-0.24.1-1-x86_64.pkg.tar.xz
lirc-utils-1:0.9.0-58-x86_64.pkg.tar.xz
libreoffice-writer-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-math-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-impress-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-gnome-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-draw-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-calc-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-base-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-common-4.1.1-2-x86_64.pkg.tar.xz
libreoffice-it-4.1.1-1-any.pkg.tar.xz
gst-plugins-good-1.0.10-1-x86_64.pkg.tar.xz
gst-plugins-base-1.0.10-1-x86_64.pkg.tar.xz
gst-plugins-bad-1.0.10-1-x86_64.pkg.tar.xz
gst-plugins-base-libs-1.0.10-1-x86_64.pkg.tar.xz
gstreamer-1.0.10-1-x86_64.pkg.tar.xz
graphviz-2.32.0-1-x86_64.pkg.tar.xz
gnutls-3.2.4-1-x86_64.pkg.tar.xz
gnome-documents-3.8.4-1-x86_64.pkg.tar.xz
gnome-online-accounts-3.8.3-1-x86_64.pkg.tar.xz
gtk3-3.8.4-1-x86_64.pkg.tar.xz
ghostscript-9.10-1-x86_64.pkg.tar.xz
gdb-7.6.1-1-x86_64.pkg.tar.xz
cups-filters-1.0.37-1-x86_64.pkg.tar.xz
chromium-29.0.1547.62-1-x86_64.pkg.tar.xz
poppler-qt4-0.24.1-1-x86_64.pkg.tar.xz
poppler-0.24.1-1-x86_64.pkg.tar.xz
imagemagick-6.8.6.9-1-x86_64.pkg.tar.xz
cairo-1.12.16-1-x86_64.pkg.tar.xz
mesa-9.2.0-1-x86_64.pkg.tar.xz
elfutils-0.155-1-x86_64.pkg.tar.xz
wayland-1.2.1-1-x86_64.pkg.tar.xz
fontconfig-2.10.95-1-x86_64.pkg.tar.xz
reiserfsprogs-3.6.24-1-x86_64.pkg.tar.xz
pacman-mirrorlist-20130830-1-any.pkg.tar.xz
linux-headers-3.10.10-1-x86_64.pkg.tar.xz
linux-3.10.10-1-x86_64.pkg.tar.xz
groff-1.22.2-5-x86_64.pkg.tar.xz
glibc-2.18-3-x86_64.pkg.tar.xz
I tried to reinstall gnome and gnome-extra but the issue remain.
thanks in advance!
Last edited by Angelsoul (2013-09-03 16:14:01)

Other informations: (journalctl)
set 03 16:24:07 dellst gnome-session[661]: (gnome-shell:737): GLib-GIO-CRITICAL **: g_task_return_error: assertion `error != NULL' failed
set 03 16:24:07 dellst gnome-session[661]: (gnome-shell:737): GLib-GIO-CRITICAL **: g_task_propagate_pointer: assertion `task->result_set == TRUE' failed
set 03 16:24:07 dellst gnome-session[661]: **
set 03 16:24:07 dellst gnome-session[661]: Gtk:ERROR:gtkicontheme.c:4302:gtk_icon_info_load_symbolic_finish: assertion failed: (pixbuf != NULL)
set 03 16:24:07 dellst gnome-session[661]: gnome-session[661]: WARNING: Unable to open shell end session dialog
set 03 16:24:07 dellst gnome-session[661]: WARNING: Unable to open shell end session dialog
set 03 16:24:07 dellst gnome-session[661]: Entering running state
set 03 16:24:07 dellst gnome-session[661]: gnome-session[661]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
set 03 16:24:07 dellst gnome-session[661]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
set 03 16:24:07 dellst gnome-session[661]: ** Message: applet now removed from the notification area
set 03 16:24:09 dellst gnome-session[661]: JS LOG: GNOME Shell started at Tue Sep 03 2013 16:24:09 GMT+0200 (CEST)

Template Preview Doesn't show images

I've created a template but when i go to create a new page
from the template the preview doesn't show the images.
Here's what i see
http://tel3deals.com/pics/contributeproblem.jpg
When i give it a name and open it it shows the page with the
images.
any idea why this is happening ?
Thanks.

THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
Try clicking on the arrow.

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Movie purchased on iTunes doesn't show up on Apple TV. Any ideas why?

Hi,
I just paid to rent a movie from iTunes on my Macbook. Switched on AppleTV to sit and watch it, and it doesn't show up in my Purchased area in movies.
Tried turning "home sharing" off, then back on again to reset it.
Tried logging out of my account, into my wife's, then back to mine hoping that would 'refresh' it.
Still nothing.
Am I doing something wrong.
P.S. The reason I didn't rent it thru AppleTV is that it was trying to charge it to my credit card, yet I have credit in my iTunes account and want to use that instead (hence why I did it thru iTunes on my macbook instead)

You rented the movie, you didn't purchase it.
Assuming you have now let it fully download to your computer, look under the computers section on the Apple TV.

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!

During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!

The update didn't apply correctly.
Did you follow the steps exactly in order to restore? disconnect all cables, open iTunes, then connect micro usb
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure to connect directly to computer, not a keyboard port or USB hub. Try a different cable.

Preview Display doesn't show - why?

Similar Messages

Maybe you are looking for