Preview doesn't remember last location

Hi,
I'm reading a 1200+ pages ebook in PDF format, but a major problem is that Preview (Snow Leopard) does not remember the location/page from the last session. I remember this worked great in Leopard (10.5) but not anymore although the eBook is well-structured, i.e., it has a table of contents and jump-links.
Do I have to configure/hack anything for it to work?
I'd appreciate any help. Thanks!

Know that the version of Preview with Snow Leopard isn't the same as before.
If a particular process is critical to your workflow, you'd be well advised to start looking for other tools, such as Acrobat.
As an alternative just for reading, try Safari instead...use the File/Open menu and let it load.

Similar Messages

  • Preview doesn't remember the last page opened

    I have noticed that Preview doesn't remember the last page of the PDF documents after 30 mins of usage (or opening up several PDF files). Is there any way to make Preview always remember the last page of files irrespective of time the file was last used and number of PDF files opened? I think in SL-ML era this was probably the case but since Mavericks it seems to have changed.

    Deleting "browser.download.lastDir" makes firefox unusable.
    It's very annoying. I'm sick of the update to 3.6. It's getting worse with each minor update.
    Hour after hour researching about this odd behavior sucks!

  • Photoshop CS6 doesn't remember window location on second monitor

    Hey
    I have 2 monitors and I've arranged the panels on one screen and the main ps windows on the second.
    I saved it as a new workspace, but now, after I restart photoshop, all the panels and the main window goes back to one monitor.
    I've arranged it like this:
    but after I close and reopen photoshop, it looks like this:
    How can I make photoshop remember the window's location after restart?
    Photoshop CS6 13.0.1 x64
    Windows 8

    Nah, I just stayed at a Holiday Inn Express last night. 
    You're welcome - glad I could help.
    -Noel

  • Music app doesn't remember last title or playback position after upgrading to iOS 8

    Hi!
    Since upgrading to iOS 8 (and now 8.1) Apples music app on the iPhone 6 won't remember which title it was playing or the playback position.
    I use to listen to music or audiobooks before going to sleep and I always set the timer to stop playing after some time. But when I get up in the morning and open the app again - it starts from scratch. I have to search for the title again and guess the time where I left off. This is really annoying and it worked just great in iOS 7.
    Anyone having the same problems?

    I went to the apple store to try to see if they could fix my i-pod. They were not aware of this problem. Did not know if any work around.  Said they would report it and it would be fixed with one of the next upgrades.  Did suggest I delete all books and music on my i-pod, since it is backed up on my computer and reload it.  That this may work...it did not.

  • Can iTouch remember last song played?

    I have bunch of albums on my iPod Touch 2 and it seems whenever I switch to watch a movie, it doesn't remember last song it played. I know it can remember position in the song, but can I make it remember which album and which track it was playing last?

    No, however you can create Smart Playlist that can help you continue to play stuff you haven't played in a while. Just make a new Smart Playlist like so...
    The "200" can be changed to any number you prefer, but something larger gives you more of a random selection when shuffling.
    So what happens is the playlist is filled with the 200 tracks that either haven't ever been played or have been the longesst since they last played. As you play out of this playlist, once a song finished, it becomes the MOST recently played, falls out of the playlist and is replaced by something else that hasn't been played the longest.
    So when you shut down and restrart, this playlist assured you that you are only listening to stuff you haven't heard in a while and nothing will cycle back into that list until you have gone through all but the last 200 songs in your library. e.g. if you have 1000 songs it won't be until you go through 800 songs that the first 200 songs start to show up again.
    Patrick

  • Firefox doesn't remember the last used download directory that I saved to when it restarts!

    Even when I have firefox set to ask me where to save files, it's default location is still the folder selected under "download options", instead of the last location I saved to.
    I suspect that this has something to do with the "download.lastdir" option in "about:config", which disappears everytime it's restarted and only appears when I have saved a file before checking on it.
    Firefox used to remember the last location in which a file was saved. This was simpler and more convenient.
    Is there a way to solve this problem?
    == This happened ==
    Every time Firefox opened
    == I installed version 3.6.6

    Deleting "browser.download.lastDir" makes firefox unusable.
    It's very annoying. I'm sick of the update to 3.6. It's getting worse with each minor update.
    Hour after hour researching about this odd behavior sucks!

  • Adobe Acrobat X - Remember Last Save Location

    Is there a setting that can be changed in Adobe Acrobat X Pro to  make the program remember the last location that you saved to?  Having to keep navigating to the same folder is frustrating.
    Thanks.

    No. The setting is remembered while you have Acrobat open, but is lost afterward. The simplest way to set up a directory that you use regularly is to put a shortcut to it in the Documents folder. This it is just one extra click away.

  • FileDialog() +how to remember the last location in Windows NTand Win98?

    Hi, folks:
    I used FileDialog() to open file, I need to remember the last location which is opened in the last time loaded. In windows 2000 and XP, it works fine. However, in Windows 98 and NT, it never remeber the last location, instead always return back to "Desktop".
    Have you anyone faced the same problem and solved already?
    Thanks.
    Paul

    Well, the easiest way I know of to save a location is to make a small configuration file, like the windows ini's and save the position in it. I've not worked much with the FileDialog(), but this sounds like it may be a way around your headache.

  • My little brother has placed a lock on my ipad and since he doesn't remember the exact password, the device has been disabled since last year. what do i do

    my little brother has placed a lock on my ipad and since he doesn't remember the exact password, the device has been disabled since last year. what do i do?

    See the User Guide for instructions for restoring when the passcode has been forgotten.

  • Windows 7 does not remember last "Save As" location

    It's really the only thing I want my machine to do– just remember the last place I saved to- nothing else really!
    Really pissed because it worked yesterday (XP).

    Hi,
    To let IE save the last location, I suggest you try the steps in the following thread:
    IE 8 does not remember Save As location in Windows 7
    http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/ee8a211f-a766-48f1-9ca3-fa268c8df66c
    Thanks,
    Vincent Wang
    TechNet Community Support

  • HT4061 I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.

    I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.
    Is there any way that I can find the last location that I left it,eventhough I called in lost and stolen and reactivated my # to a different device.

    If you didn't set up Find My iPhone or it otherwise does not appear in icloud.com, then there's no way to trace it. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance). 
    Regards.

  • I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3.  I haven't come across Preview or this problem before.  Any suggestions?

    I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address.  Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format.  I haven't seen Preview, or had any problems, before now.  Thanks for any suggestions.

    Hi,
    Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
    For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
    The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
    If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
    It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • Photoshop CS6. Save for Web Problem - Don't remember folder location

    Hi!
    Found one more problem with Save For Web in Photoshop CS6.
    Example:
    1. New Document
    2. Choose - Save for web
    3. In dialog window Photoshop CS6 offer to save in - os My Document Folder
    4. Ok, every time I don't really need to save in os folders - I save files to my folders. So, change folder ...for example to disc D
    5. Create another New document
    6. Choose Save for web
    7. And.... - Photoshop CS6 offer to save my file in os My Documents AGAIN !!!
    So, in fact it's real uncomortable!!! ...if I save different files for web frequently ....I need every time change My Documents....it makes me nervous.......
    Here - compare with CS3: CS3 remember "old" folder location even at another session (for example - after reload os)
    Is there any fix this problem?
    p.s. Testing on:
    OS - windows 7 64 bit
    cs6 - 64 bit extended
    cs3 - 64 bit extended

    Noel, Yes! In your example everything works like on your video. May be my explanation was not so clear, so...I'm trying to describe in more details.
    I don't know how to make video & animated gif by capture the screen...so I'll try to explain by words
    1. Start CS6
    2. Make New Document
    3. Save for Web (save parametres are: JPEG, HIGH etc....I think it doesn't matter)
    4. CS6 offer "My Documents"
    5. Change the way to "Disc D"
    6. Save it by name for example "Untitled-1".... & close window "Save for web"
    7. Choose "Save for Web" again
    ....So, at this step - CS6 remember my current location "Disc D" even I open other file & use command "Save for web"...it saves to Disc D. Everything is ok.
    ....continue:
    8. Shut down the CS6
    9. Run it again
    10. Create new file or....even open saved file on disc D in previous session - "Untitled-1"
    11. Save for Web
    So, it's final: CS6 offer the "My documents" AGAIN
    ....continue:
    12. Run CS6 - Make New File - Save for Web to disc D by name "Untitled-1"
    13. Keep the photoshop session & create new document...let's call it "Untitled-2" - so, now I have 2 files opened in CS6: "Untitled-1" (it was saved on disc D before) & new "Untitled-2"
    14. So if I'll try to save second file "Untitled-2" fo web CS6 offer the way "My documents" AGAIN!
    p.s. Tryied to do the same on CS3 - Shut down CS3 2-3 times, opened different files, create new docs - there's no trouble. In global - CS3 remember last way (in my case it's "Disc D") & doesn't change it by itself. In fact working in CS3 I din't feel any problems with this command "Save for Web", that's the reason I didn't write any questions on forums etc..... But starting to try CS6 I really feel it makes the work to change every time the folder ways not so comfortable...so I wrote the question here
    p.s. 2    In spite of I didn't work in CS4-CS5 cause it were not comfortable in my opinion....now I wanted to  test "save for web" in CS5. Trouble is the same even during one session:
    1. Run CS5
    2. Create new document
    3. Save for web - CS5 offer "My Dociment", change it to "disc D" - save - ok
    4. Shut down, run CS5 again
    5. Create New, or even Opened old saved file to disc D (for example from step 3) - CS5 offer the way "My documents" again
    I hope this my explanation was more clear to understand

  • Thunar not remembering window location

    I've reinstalled Arch on a new laptop, and cp'd my root and user directories over (including some hidden files) (and chowning them to the new users as needed). It looks like I may have done something wrong. Thunar doesn't remember the last window location, so each window starts small in the top-left corner. Where is this setting stored? I've looked in .config/Thunar but don't see anything. I don't have this issue with my browser, terminal, or any other programs that I'm aware of.
    I am using XFCE4, and LightDM (if that matters).
    Last edited by krovisser (2014-03-19 23:03:26)

    Looks like everything is stored in the xfconf database, but I don’t know where it is located.
    xfconf-query -c thunar -l
    Note that Thunar does not remember its position, however it should remember its size.
    Edit: there is the “misc-remember-geometry” value, though… maybe setting this to true would help.
    Last edited by stqn (2014-03-19 09:24:29)

  • Safari Doesn't Remember Tabs

    Noticed a strange behaviour in Safari 6 on Mountain Lion.
    When I close the window by clicking the red x in the top left and then re-open, Safari comes up with a blank pages, it doesn't remember any of the tabs I had open.
    If however I close it by clicking quit on the Safari dock icon and then re-open, Safari opens back up with all my tabs from the last session.
    This doesn't seem right, any advice?

    When you quit Safari, (Mountain) Lion's Resume feature will remember what pages you had open and reopen them the next time you start Safari, because that's what the feature is supposed to do.
    But when you close Safari's window—not by quitting, but by clicking the red button—(Mountain) Lion assumes that you don't want to see all those window's tabs again. (That's why you closed the window.) So it doesn't restore them when you open a new window.
    You should get into the habit of quitting Safari when you want to stop using it, but might want to resume where you left off later. Really, the same goes for all other Apple apps. Closing a window tells the app and the OS, "I don't want this file/page/whatever to be open anymore." On the other hand, quitting the app tells the OS, "I don't want to use this app right now, but I might use it again later, and please reopen the same files/pages/whatever the next time."
    By the way, the easiest way to quit an app is to press ⌘Q.

Maybe you are looking for

  • Erase and sync issues (backup/restore)

    Hello. I have an issue with the backup/restore with my iPhone. Sometimes, it is difficult to find an answer that fits your problem exactly on the forum!  Lots of good stuff though! This post will be little longer than normal, but I need to get all th

  • Hp 2210 all in one error message

    I keep getting the message remove & check cartridge even after installing a new color cartridge & the black cartridge is fairly new also. I cleaned the copper contacts but I still get the message.

  • Add/change datatype column (scripting)

    Hello, I am writing a script to add default columns and their values to tables. So far for me it's possible to add columns to an existing table in the model. Next I want to add the value for datatype. I found out there's a method called getDataType()

  • FRONTEND_ERROR in the "WS_QUERY"

    Hello Experts, I am getting an runtime error when trying to open an archived invoice via transaction FBL5N.This runtime error is coming in the FM " WS_QUERY" with description as " Exception condition "Frontend Error raised."  Is this error is related

  • Change of currency document

    Hi i Hope someone help me: There is a payment document with 20 position ( BUZEI ). And in the document ,In the position document 16 (BUZEI), there are two fields amount one of them, USD and the another one EUR (BSEG-WBTR...). The rate change is 700,3